There is actually no way the bag 3 is fucked up for so many people… I can’t connect the front to both of the sides. I literally rebuilding it 2nd time and still stuck on it.
I'm also not able to get it to connect. The yellow squares won't connect. One side pulls out in order to connect in the column and the other side plain won't connect.
@TopBrickBuilder I figured it out! The two yellow square were flipped upside down. Changing the connection point. Once I flipped them so the studs where facing upwards it's all popped together easily!
For anyone stuck in step 148, where u may need to connect the front from the sides u just made, pls check step 125! There’s actually a 3x1 attached on the bottom of the Grey moving piece! I hope that makes sense but basically check step 125😭😭😭 it took me like hours. Vice versa check step 163 for the other side piece😭😭😭😭
@@sapphire1623 hahaha no worries at all😭 I also got stuck on this shitty step and I was trynna find a video to fix this fml😭😭 almost had to call lego support or sumn
Hi, I'm stuck on 293, the covers that should hold together the blue front wheel disassemble all the time, I don't know what I'm doing wrong anymore, I watch your video and I didn'd to anything differently.
I’m stuck on Bag 3. I’ve built everything in the bag but I can’t get the two side pieces to connect to the middle piece without one breaking off 🤔 I’ll connect one side to the middle like instructed and then I’m left with this large gap and when I try to push the the other side together it just pulls everything apart. It’s driving me bonkers. Any suggestions before I lose my marbles?? 😅
@@TopBrickBuilder hi, I believe it would be around 14:14 and 16:00 when you connect the two side pieces to the long middle piece, that was built in bag 3. The one side connects fine as shown in 14:14 but when it gets to 16:00 I have a large gap and the two pieces cannot connect..
These two big things are pretty hard to install, you have to be sure that you've installed from the bottom to the top by pressing harder, then be carefull on next part, be sure from the bottom to top if it's well connected, the top ones you have to press at final! Try this and tell me if it worked 💪
@@TopBrickBuilder unfortunately not, if I connect the one side, the other side is left with a large gap and if I try to push it together the connected side disconnects 😰 I’ve got no idea where I’ve gone wrong on this bag.
Hi im stuck on bag 5 the wheel part its too close to the yellow thing i can't put the black pieces in to connect it to the light blue piece idk what im doing wrong
It's the single piece with the side at 15:14 . The side goes the wrong way for me. I definitely didn't lose a piece and I've done everything correctly. It's got me tripping 😂
@@TopBrickBuilder no , for me where the engine is and the side panel goes on top , it wont fit like the side panel isnt securely clipping in its very flimsy and i dont know why because i followed the instructions perfectly and when i was unsure checked ur vid and it was the same. just isnt stable on the vespa and i dont know why
@@TopBrickBuilder alright thank you! I figured it out but for the front wheel is it supposed to spin around loose or I’m I supposed to like tighten it?
There is actually no way the bag 3 is fucked up for so many people… I can’t connect the front to both of the sides. I literally rebuilding it 2nd time and still stuck on it.
But why? You can install that parts here 15:53
Me to
I'm also not able to get it to connect. The yellow squares won't connect. One side pulls out in order to connect in the column and the other side plain won't connect.
That's very interesting 🤔 Definitely you've made a mistake, mine has fitted well, can't say for sure that mistake you've made
@TopBrickBuilder I figured it out! The two yellow square were flipped upside down. Changing the connection point. Once I flipped them so the studs where facing upwards it's all popped together easily!
For anyone stuck in step 148, where u may need to connect the front from the sides u just made, pls check step 125! There’s actually a 3x1 attached on the bottom of the Grey moving piece! I hope that makes sense but basically check step 125😭😭😭 it took me like hours.
Vice versa check step 163 for the other side piece😭😭😭😭
Thank you for the tip and explanation, I hope it will be useful for others!
the hero we needed
Yep! We need more heroes like him 👏
You're a fucking savior for this comment. Was stuck for about 2 hours trying to figure it out
@@sapphire1623 hahaha no worries at all😭 I also got stuck on this shitty step and I was trynna find a video to fix this fml😭😭 almost had to call lego support or sumn
Hi, I'm stuck on 293, the covers that should hold together the blue front wheel disassemble all the time, I don't know what I'm doing wrong anymore, I watch your video and I didn'd to anything differently.
Well, these covers are pretty wobble, if you don't touch them, still falls?
I’m stuck on Bag 3. I’ve built everything in the bag but I can’t get the two side pieces to connect to the middle piece without one breaking off 🤔 I’ll connect one side to the middle like instructed and then I’m left with this large gap and when I try to push the the other side together it just pulls everything apart. It’s driving me bonkers. Any suggestions before I lose my marbles?? 😅
Post me the timestamp and I will tell you
@@TopBrickBuilder hi, I believe it would be around 14:14 and 16:00 when you connect the two side pieces to the long middle piece, that was built in bag 3. The one side connects fine as shown in 14:14 but when it gets to 16:00 I have a large gap and the two pieces cannot connect..
These two big things are pretty hard to install, you have to be sure that you've installed from the bottom to the top by pressing harder, then be carefull on next part, be sure from the bottom to top if it's well connected, the top ones you have to press at final! Try this and tell me if it worked 💪
@@TopBrickBuilder unfortunately not, if I connect the one side, the other side is left with a large gap and if I try to push it together the connected side disconnects 😰 I’ve got no idea where I’ve gone wrong on this bag.
@@TopBrickBuilder same I am so stuck I need your help
Thankyou
You’re welcome 😊
I dont have the single piece in 4 : 05 . I m having a hard time fixing it. Can someone help
Hi im stuck on bag 5 the wheel part its too close to the yellow thing i can't put the black pieces in to connect it to the light blue piece idk what im doing wrong
Hi, tell me at what moment in video you are?
@TopBrickBuilder hello yes around the 25:00 mark up to 25:40
Check the crafted part started with 24:24, be sure that this part is builded right
I finished bag one and had leftover pieces, so glad to see you had the same leftover 😂
Sometimes the leftover pieces are different, but in your case is the same. Glad for you, good luck with building it! ✌
@@TopBrickBuilder thanks man 🤙
It's the single piece with the side at 15:14 . The side goes the wrong way for me. I definitely didn't lose a piece and I've done everything correctly. It's got me tripping 😂
Don't worry I just realised it gets covered anyway so it don't matter 😂
😁
I’m stuck on bag 3 because the front piece won’t fit
At what exact moment? Can you post a timestamp?
Samme have you solved the problem?
I'm bag 3:((
Do you have some problems at 3rd bag?
I was having problems with the stirring wheel in the front the right side won’t fit but when I put the left side it fit
omg u deserve more likes!👍👍👍👍👍👍👍👍
Thank you for your kind words! 🥰
8:53 the black piece doesn't fit into the yellow one... why? Same here why does the yellow one exist tho?
Are you sure that this is the right time of video? Can't understand what pieces do you mean. At what step you are?
on 13:34 i’m having a hard time attaching that part
Have you figured out? A pretty simple step 🙌
15:39 i just watch the this oft cuz I was stuck on bag 3 n realized I’m really missing pieces I’m so mad rn 🤦🏻♂️🤦🏻♂️🤦🏻♂️
And now? Did you found your mistakes?
@@TopBrickBuilder I’m not building this set tonight imma have to break it down n’ start all over again 😤😤😤
@@TopBrickBuilder yeah had to go thru it twice it’s all set 💯
Waiting for good news 😁
@@TopBrickBuilder just finished, it was worth buying and building it 🔥🔥🔥
14:11 the front piece isnt attaching at the front and i seem to build it right whats the prob?
Its kinda attaching but it isnt in line with the tringal piece near the bottom
Even you are pressing harder that piece with 3 dots?
@@TopBrickBuilder yeah it doesn’t go in line so im building it again
@nonilh2867 Good luck 👍
@@TopBrickBuilder no it doesn’t attach I’ve rebuilt the front piece and the piece before like 3 times idk what’s happening 😕
bag four is the most infuriating thing to ever exist.
Have you done it?
@@TopBrickBuilder no , for me where the engine is and the side panel goes on top , it wont fit like the side panel isnt securely clipping in its very flimsy and i dont know why because i followed the instructions perfectly and when i was unsure checked ur vid and it was the same. just isnt stable on the vespa and i dont know why
Please write a step number or time in video
@@TopBrickBuilder 20:47
It should clip pretty solid, try to shake the cover, by pressing different corners but carefully, it should fit perfectly
Why wouldn't you have timestamps?
Thanks for the tip, added now.
@@TopBrickBuilder good on you, appreciated. Girlfriend dropped her lego so I was fixing it lol.
Hehe, it happens sometimes 😅
im stuck on 16:00 it won’t fit i need help
That's a pretty tricky step, try to install one side, and then another one, but very carefully both sides.
21:16 im trying to connect the piece together but it just won’t like click idk if I did something wrong
If it doesn't click them seems like something is wrong build...
@@TopBrickBuilder alright thank you! I figured it out but for the front wheel is it supposed to spin around loose or I’m I supposed to like tighten it?
No, it is spinning like this... You can't tighten it.
@@TopBrickBuilder alright thank ykh
I have the same question, ive rebuilt it twice and it still wont click 😭
the helmet is the worst ! it drops and breaks all the time i can never get it to stay!
That's true, same thing ((
I have just finished bag one and have pieces left, is this normal or have I missed them and need to start again. Great video btw
Thanks for your appreciation! See this minute 4:22 where i have shown pieces left from 1st bag (in my case)
@@TopBrickBuilder thank you so much, I have those same pieces 👍
Then everything is right! 😃