I used to weld up dust collectors and shears and all big heavy equipment items for foundries and what have you, I'm old now retired with two real bad hips and I miss work, having to retire really sucks😢 very depressing
I’ve noticed the comments so far are happy for you getting a new TOY it’ll be interesting to figure out how everything works. Your dog is like mine likes to be in the middle of things, starting to get old, like mine. Thank you Sir for the video
Now that my mechanicing days are long past, I keep my home improvement tools in those same boxes. I think I bought one at the local Ace, and ordered the rest from Summit Racing (had the best prices of all the choices).
I have 2 of these machines they are pretty decent a couple of minor improvements are needed the aluminium bearing mounts aren't flat and when you tighten them up it grips the bar and doesn't help it slide smoothly also the bolts that are used to hold the motor onto the bearings are better changed to studs to make it easier to mount the motor up that's pretty much the only things I could find fault with the screws that adjust the cutters are 1.0mm fine pitch so when you adjust the bar it moves it out twice that distance the measuring tool is pretty decent and very accurate but make sure you sweep it across the cutter to get the highest point
Hi you can tell me something more about it i just order one on aliexpres and im afraid if its come 😅and generali how its work. Thank you Edit. How long you waiting for your mashines? Where you from?
I recently bought the same machine directly from China. Manufactured by S Power but sold under various brands on Alibaba. All the parts are exactly the same as yours, rotating unit, feed screw, shafts, tools, etc. Your machine seems to be re-packed nicely into Milwaukee Packouts, I received my machine in weak plywood boxes whose were damaged during shipping but anyway the machine itself was ok.
Great, now I think that if all of you master fabricators and creators could suggest plans for a pull out Micro Lathe sliding rack door setup for on site machine work (some kind of roll out design protected from the elements), would be an Awesome addition to his Rolling Machine Shop/Welding Heavy Equipment Warehouse on Wheels.
Snowman poop! It's what I called them at work before I retired. Hated them, they got everywhere. But they did the job, protected whatever they were packed around.
Hell yeah. Its exciting to see one of these in the hands of an experienced bore repair guy. I have been waiting to see if these units are worth a damn. Don’t hold back. Let us know if the quality is there. It has the euro style connector on the welding lead. I wonder if the little arc captain could run it? Does it have the duty cycle to make?
I can't to see what I think of it. I was in contact with s power this summer and got a quote to have the setup shipped to me. I just wasn't sure if that was the setup I wanted to go with. The york setup is appealing to me because you can run three different size boring bars off of the same motor. So you can run a small bar for smaller bores. I don't know what the best setup would be if I was only buying one setup. But definitely interested in hearing your thoughts on the s power.
Would be better for those larger Milwaukee boxes to have had proper custom foam cutout trays than just packing foam. And yes packing peanuts can F**k right off, why do people use them?
Im always hesitant to buy a product when the company website doesnt have correct grammar/english. Obviously a Chinese product, so I'll be surprised if it holds up well with time. Looking forward to feedback nonetheless...
Sir, we are a fabricator and heavy machine repair company in Scotland, we are in the market for a line borer, now that you have had this machine for two months how do you rate it, they sell for £4500 in the uk plus tax
I assume that you were offered this very extensive package for free? If that is indeed the case, I thought you should show more respect for the sponsor and better visualize the various boxes. For example, you did not even remove the foil from the measuring instruments in the blue- and wooden box for our viewers and show the contents. I think this should be said. Greetings from the Netherlands.
This is an unboxing video. When I make the video about using it and i know and understand everything that it came with I will gladly show everything. Yes it was “free” and I wasn’t asked to do a video, I just decided to make one because I was grateful for it.
Hello, I come from Slovakia and I would like to ask if it is worth investing in an S-power machine to begin with. I've thought about it for a long time, I'm just afraid of it. Sorry if my English is not good, but I translate via google, Thank you for your reply.
My dog is extremely well taken care of! He has several warm fluffy beds with heaters and heat lights but he chooses not to lay on them. He also jumps into ice water for fun.
Yes he’s got a welding helmet, wears it all the time when he’s welding or arc gouging & goggles for when he’s using a torch, then face shields for grinding. He knows to be careful.
We have entered into the world of "unboxing stuff: influencer content." Respectfully boring............ Sitll love your content tho...... this one seemed unlike you.
This video was a little different in the fact that this was sent to me for free and they did not ask for me to make a video. I was very grateful for that so I decided to make a video about it.
How about you just take all those nicely packaged parts out of those cases and just dump them in a big bucket? Then you could grab a broomstick and stir till the thing you think might work comes to the top. Just a really wild idea but you might have looked at the outside of the boxes to Find the packing list in the instructions before You just put it All In a Big pile. If this video is an example of your professionalism I feel sorry for your customers. Adios. I see now why your name is on fire welding.
Put it through the ringer let’s compare it to the BB5 one thing I like the pricing specially if you’re just starting out, but is it worth the money I can’t wait to you get it going. I can’t afford the big blue just yet. What are the bore dimensions on the S power?
I used to weld up dust collectors and shears and all big heavy equipment items for foundries and what have you, I'm old now retired with two real bad hips and I miss work, having to retire really sucks😢 very depressing
Sir,your's is the inevitable lament of all generations. It is mine!!!
Their pride in their product is evident by the way they packed it! That is an incredible job of packing!
I’ve noticed the comments so far are happy for you getting a new TOY it’ll be interesting to figure out how everything works.
Your dog is like mine likes to be in the middle of things, starting to get old, like mine.
Thank you Sir for the video
Very nice can’t wait to see how it preforms . !!
I love watching you wrestle with a star foam
The Milwaukee boxes are slick, and using them as shipping containers like that is clever too.
Now that my mechanicing days are long past, I keep my home improvement tools in those same boxes. I think I bought one at the local Ace, and ordered the rest from Summit Racing (had the best prices of all the choices).
The cart idea is wonderful.
I somehow missed this video. Looking forward to your observations comparing this setup to your Climax machine! Thanks for the excellent video.
I have 2 of these machines they are pretty decent a couple of minor improvements are needed the aluminium bearing mounts aren't flat and when you tighten them up it grips the bar and doesn't help it slide smoothly also the bolts that are used to hold the motor onto the bearings are better changed to studs to make it easier to mount the motor up that's pretty much the only things I could find fault with the screws that adjust the cutters are 1.0mm fine pitch so when you adjust the bar it moves it out twice that distance the measuring tool is pretty decent and very accurate but make sure you sweep it across the cutter to get the highest point
Hi you can tell me something more about it i just order one on aliexpres and im afraid if its come 😅and generali how its work. Thank you
Edit. How long you waiting for your mashines? Where you from?
@@Bartoszbb130 UK based mines came from the dealership
@@krisbrzezina2289 you can tell how much you pay? Thank you
ex fabricator here, you have some nice toys. Chinese know how to pack stuff. saw it listed @ 8K
We got one of them at work it does pretty good we r on the second line boring job with this machine very happy with it
Looks like a nice set. Well packaged for sure. Interested in your opinion on how it performs. Thanks for posting, Greg!
12:21 the peanuts are driving him nuts!! Lol good looking set up look forward to seeing you guys put it to work
Greggy has a new Tool.....outstanding......cheers from Florida ....Paulie
I know it's like 10 Christmas's for you, but the Shop Dog coming to check out the commotion, won the internet today for me :)
That seems to be a complete set up, very nice.
Wow! S-power really likes packing foam!
It's awesome you do have to buy Field box's to
Very interested in seeing your thoughts on that thing. I've been using an old mag drill set up for awhile and been looking at upgrading.
I will definitely give my honest opinion when I test it.
Let’s see what it can do! Thanks for sharing!👌👍
I recently bought the same machine directly from China. Manufactured by S Power but sold under various brands on Alibaba. All the parts are exactly the same as yours, rotating unit, feed screw, shafts, tools, etc. Your machine seems to be re-packed nicely into Milwaukee Packouts, I received my machine in weak plywood boxes whose were damaged during shipping but anyway the machine itself was ok.
Did you order from Bonnie? I'm waiting for mine to begin its trip from china to Houston
@@kaseycoleman993 From Wenzhou Shenrui Machinery Equipment. Very helpful customer service. DDP, they did all, I only paid and received the shipment.
@@kaseycoleman993 i by my S power on aliexpres from oficjal store, but I dont know if its come im little afraid 🫣
Great, now I think that if all of you master fabricators and creators could suggest plans for a pull out Micro Lathe sliding rack door setup for on site machine work (some kind of roll out design protected from the elements), would be an Awesome addition to his Rolling Machine Shop/Welding Heavy Equipment Warehouse on Wheels.
It’s already in the works. When finished there will be a video on it.
I'm getting choked up watching this, good luck with your future Ventures😢
Snowman poop! It's what I called them at work before I retired. Hated them, they got everywhere. But they did the job, protected whatever they were packed around.
congrats one your new line borer things must be going well, keep up the great work!
Looks good you should be good for a while with all the new stuff nice Christmas present you got there enjoy...
Definitely hold onto your Climax. I have a feeling this one will leave you wanting.
This is the grown-up version of what kids do every December 25th 🎄🎄🎄
Wise men invest into their business. Can’t wait to see how this nee tool works.
Cant wait to hear your opinion and review about this been looking at them.
Cant wait for the review on this machine
Note to Jacob..... The boss loves packing peanuts, especially in his truck....
Awesome work well done
The candy store has arrived!
Greg, I think we found your Kryptonite, packing peanuts!! 🙂
Hell yeah. Its exciting to see one of these in the hands of an experienced bore repair guy. I have been waiting to see if these units are worth a damn. Don’t hold back. Let us know if the quality is there. It has the euro style connector on the welding lead. I wonder if the little arc captain could run it? Does it have the duty cycle to make?
That’s a good idea. I’ll see if the captain can hang in there. I will definitely give my honest opinion on it.
Wow!! Here go ,,,one full pot of coffee on!!;-)!!
This is like Christmas for me
My jaw is on the ground 😮
I would be willing to bet they intended the drive motor to go in one of the larger boxes if you smart about how you pack everything.
I can't to see what I think of it. I was in contact with s power this summer and got a quote to have the setup shipped to me. I just wasn't sure if that was the setup I wanted to go with. The york setup is appealing to me because you can run three different size boring bars off of the same motor. So you can run a small bar for smaller bores. I don't know what the best setup would be if I was only buying one setup. But definitely interested in hearing your thoughts on the s power.
I cant wait for your reviw of the spower machine ....im verry currious what you think ..... i like the unboxing and how compact it is
Get a pvc or abs pipe with end caps to store rod. Peace out
How many people watchin this are mentally pickup up those pieces of packing foam 😂
Would be better for those larger Milwaukee boxes to have had proper custom foam cutout trays than just packing foam. And yes packing peanuts can F**k right off, why do people use them?
I definitely think I’m going to be getting some custom foam inserts.
package peanuts with a static charge are impossible to pick up. It would kind of piss me off considering other options that are just as cheap.
Very nice, guess it will be 200 bucks extra to unload it...
Belle outillage = Bon Travail je serais mème tanté de venir travailler avec vous autre😆😆
11 👍's up on fire welding thank you for sharing 😅
Wait, did they send you this for free?
very impressive
Im always hesitant to buy a product when the company website doesnt have correct grammar/english. Obviously a Chinese product, so I'll be surprised if it holds up well with time. Looking forward to feedback nonetheless...
Nice 😊
Nice👍
Awesome 😎
Very interested in what you think of this after testing
laughing how you unpack that sucker, just like I would have done it.....
I was hoping the wooden crate was full of packing peanuts.
Sir, we are a fabricator and heavy machine repair company in Scotland, we are in the market for a line borer, now that you have had this machine for two months how do you rate it, they sell for £4500 in the uk plus tax
I haven’t really used it yet. I should be doing a video about using it soon.
I assume that you were offered this very extensive package for free? If that is indeed the case, I thought you should show more respect for the sponsor and better visualize the various boxes. For example, you did not even remove the foil from the measuring instruments in the blue- and wooden box for our viewers and show the contents.
I think this should be said. Greetings from the Netherlands.
This is an unboxing video. When I make the video about using it and i know and understand everything that it came with I will gladly show everything. Yes it was “free” and I wasn’t asked to do a video, I just decided to make one because I was grateful for it.
Ящики стоят больше чем апорат
Peanuts 😱😱😱
What's the price range for a set up like that
About $8,000
Hello, I come from Slovakia and I would like to ask if it is worth investing in an S-power machine to begin with. I've thought about it for a long time, I'm just afraid of it. Sorry if my English is not good, but I translate via google, Thank you for your reply.
I haven’t used the machine yet. But I will be doing a video about me using it and my honest opinion about it.
Where did you order this kit?
Mobil Machine Source
Sick!!!!!!!!!!!!!!
How does a line boring machine power feed?
There is a gear box and it goes down a threaded rod while pull the bar with it.
Curious as to what that set up cost and how big of bore it’s capable of
I’ll have all the details in a video coming up.
Thanks! I’m very interested!
👍
Is this kind of a climax vs s power?
Not really. It will never be on the level of Climax. But it might work just fine for some things.
Please give the dog something warm to lie on so he is off the cold concrete.
My dog is extremely well taken care of! He has several warm fluffy beds with heaters and heat lights but he chooses not to lay on them. He also jumps into ice water for fun.
Is there a link from the outfit you got it from?
Mobil machine source In Florida
Thank you
👍👍
On. that is insane picture,adios!=)
You hittin the gym too bro? Where do you find the time?
Actually I am. Every morning at 5am
@@OFW it shows, keep up the good work!
Where you buy this machine?
Mobile machine source. Out of Florida
@@OFW thank you !!!
Love your videos but this was S bore...........ing
Здравствуйте, подскажите пожалуйста у вас маска сварочная и вы используете её как при резки и сварке как мне такую преобрести
Yes he’s got a welding helmet, wears it all the time when he’s welding or arc gouging & goggles for when he’s using a torch, then face shields for grinding. He knows to be careful.
@@dirtfarmer7472 Спасибо вам вы хороший сварной
do you have a contact if we wish to purchase this unit?
Mobil machine source in Florida
How much ?
About $8,000
@@OFW anytime you invest in yourself it's a good investment!!!
i bet your still picking up peanuts
When you are testing it?
Soon
If this were the first time I was watching your video I would not watch again don’t be ungrateful don’t be a Karen over packaging
I am definitely not ungrateful! You must not understand jokes.
We have entered into the world of "unboxing stuff: influencer content." Respectfully boring............ Sitll love your content tho...... this one seemed unlike you.
This video was a little different in the fact that this was sent to me for free and they did not ask for me to make a video. I was very grateful for that so I decided to make a video about it.
How about you just take all those nicely packaged parts out of those cases and just dump them in a big bucket? Then you could grab a broomstick and stir till the thing you think might work comes to the top. Just a really wild idea but you might have looked at the outside of the boxes to Find the packing list in the instructions before You just put it All In a Big pile. If this video is an example of your professionalism I feel sorry for your customers. Adios. I see now why your name is on fire welding.
You have no idea what you are talking about.
Put it through the ringer let’s compare it to the BB5 one thing I like the pricing specially if you’re just starting out, but is it worth the money I can’t wait to you get it going. I can’t afford the big blue just yet. What are the bore dimensions on the S power?
I’m definitely going to push it during testing and give my honest opinion on it. I will post all the specs when I make a video about me using it.
👍