Mold Making Tutorial: Two-Piece Polyurethane Rubber Core Mold
HTML-код
- Опубликовано: 14 окт 2024
- This mold making tutorial video demonstrates making a two-piece cored mold using Reoflex 40 urethane rubber from Smooth-On.
Make It Now! with Smooth-On
www.smooth-on.com/
/ smoothon
/ smoothon
www.google.com/...
~-~~-~~~-~~-~
Adult Supervision Required
Keep Out Of Reach Of Children
~-~~-~~~-~~-~
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
This wasn't what I meant to watch but I couldn't stop watching it..... Awesome
Mold Making Tutorial: Two-Piece Urethane Rubber Core Mold - RUclips
Smooth-On
Smooth-On how doing a mold of a cupule that are emty for under
I really wanna try to do this but the cost of making a mold and failing scares me 😂
Very detailed and helpful video, thank you!
damn that is some SMOOOTH Jazz!! it would be funny if he forgot to put the pot in there when he poured the second half.
We really enjoy the the smooth jazz here!
once the prep work is complete the mold making is actually pretty fast and easy too!
The video was excellent. It looks like a lot of work unless one is going to make multiple casts.
Why cant you heat the clay in a slow cooker then pour it rather then going through the hassle of cutting pieces, filling and then ATTEMPTING to level the surface when gravity can do it for you much faster and with superior finish though?
Would you still use this type of mold if the bottom had large holes in it? Or is there something else you would do?
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Quick question. If you’re aware of vintage movie cameras or just cameras that use a large eyecup that the face sits on, do you think polyurethane would be good for a light seal black rubber eyecup?
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Amazing tutorial!!!!!
hello good night, on average how long does this rubber last? How many, Pecas can I do with her?
This would depend on the type of casting material used. Here is an FAQ which may help - www.smooth-on.com/support/faq/183/
wonderfull job I make containers but I am a beginer in this area can you give me some tips?
hit the replay button
Muy bonito
im really confused why the plastic cup was hot glued to the base board? it didnt say its purpose or even show it being used please help
I'm confused about that part too. Re-watching isn't clarifying either.
Simply to reduce ammount of rubber required for mould. You don't need it to be 100% solid.
Can you tell me what the first piece of music is called please. I love the video.
Hi there, can I use modeling clay as a model?
ooh! it very nice, it easy to make,i need to make it.
very helpful thanks a lot
What martial are there because there's a lot thanks👍🏻
+Benny Vo This is Reoflex Urethane Rubber
Y to stick that plastic glass/container in centre please help me understand?
This is done to take up room and save on rubber, as well as making demolding easier.
@@smoothon how did the rubber stick to plywood normally it doesn't stick to any surface right
how does glass help in making demolding easier
@@djaysquare This is urethane rubber, not silicone. Urethane rubber is very adhesive.
@@djaysquare it makes the interior walls thinner and more flexible
can this be done with round planters?
Absolutely!
So no release is used when pouring the products?
We apply Universal Mold Release at 2:00 - ruclips.net/video/zLC71-04R2o/видео.htmlm1s
This quantity is enough for 3 molds like that. I know you sell PU, but....
Pat Metheny Group: "This Is Not America"
Great song.
6:20 ET VOILA! THE BIGGEST CARAMAC IN THE WORLD!
Thumbs up if youre a caramac lover......getting hard to find now :(
Good
muito lindo
#Smooth-On How visible will the irregular cut along one of the edges be on the finished product? Any way to 'key' the cut? So far this IS the technique I need to use but the seam cut troubles me a bit...tks!
If the mold is made correctly, the amount of flashing should be minimal. It can be tricky to get this correct, but we are always there to help!
@@smoothon thanks...will be in touch
Very informitave
Quisiera traduccion al español por favor.
What's the pot life / durometer of this material?
Pot life 30 minutes - Shore A 40 hardness.
very informative
vendem essa forma? vendem esse molde?
Thanks for watching Wenis Silva oficial. We do not provide moldmaking services, but we do have a list of moldmakers on our website: www.smooth-on.com/moldmaker/
Educational
Thank you for watching! Don't forget to subscribe!
muy bueno
cool video and it may have given me a solution for fake vinyl toys.
But what a sad song to pick for a tutorial.
Wow
Great video; however, it show nothing about how to measure the proper volume of rubber for the mold, or the material for the casting. It show no quantities.
Awesome
hot glue gun is NOT the best option for sealing things. My mold leaked out and a bunch got wasted. Also, this process seems rather tedious. What I did instead is fill in the cavity and let that dry, then i flipped it and poured the rest of the mold as normal, leaving the top exposed for pouring.
Sjajno
super
MUY. BONITO. TRABAJO. ME. GUSTO. COM. DEDICASIOM. Y. ARTE. EM. BRASIL. YO. TRABAJABA. ASIENDO. LO. MISMO. PERRO. EM. EU. LO. ASEM. COM. MORDE. DE. MAQUINA. EM. UM. DIA. ASEM. COMO. 1000,00
👋👏
Is the video is informative, a little outdated graphics, but the information is there. The 70's elevator music put me to sleep.
NOTA LA MUSICA ES DE DAVID BOWIIE THIS IS NOT AMERICA
This music is turning me on
law samahat maasim almawadd
Beleza técnica