Thanks Geardo for the explanation! After replacing mine, the display shows horizontal black lines right in the middle, Is there any repair possible without replacement of the part ?
Thanks for your feedback. To disconnect the power needs to undo the screw on the battery connector and raise the logic board. The ideal method is to perform the repair with an anti-static pad or tablet/watch. That is the issue with most iPad devices and good pixel phones. Disconnecting the battery is not straightforward. Make sure the power is off, and i would say 99% it is fine. Some may not agree with what i am saying. If you can find an original adhesive, go for it, but using aftermarket non-genuine adhesive can create issues. So it is better to use b7000/t7000 glue. Again it comes to preference and availability.
He didn't solder back the small tab just beside to the left of the home button and he also didn't installed the camera bracket to center and prevent the camera from moving around 😐😐😐
Thanks Geardo for the explanation! After replacing mine, the display shows horizontal black lines right in the middle, Is there any repair possible without replacement of the part ?
No.
The clamps with the thumb screws - do you have a link to an ebay or amazon listing for those?
Your location?
@@DIYGeardo Norway. I usually get most of my stuff from china via ebay.
I have followed the steps without disconnect the battery and some of components got damage 😒
What components you got damaged?
Why dont disconect the batery?
Awesomeness
Thanks 🙏
hi, when I press the button it doesn't come back in relief, it could help me?
You mean the home button is stuck ?
@@DIYGeardo Yes right
@@alessiacantiani4394 Probably it got stuck, you need to remove the screen and need realigned the button. Probably an issue with metal piece too.
@@DIYGeardo do I need to put some glue between the front panel and the new home button? thanks soo much
You do not show how to take digitiser from glass!
It is not possible in air 2. It is possible with many machines and tools. But it is worthless
Bravissimo.
Thanks 🙏
Where to get the screen from??
Jstech.com.au
So you don’t disconnect the power 🤣, and just use double side type would be better than glue
Thanks for your feedback. To disconnect the power needs to undo the screw on the battery connector and raise the logic board. The ideal method is to perform the repair with an anti-static pad or tablet/watch. That is the issue with most iPad devices and good pixel phones. Disconnecting the battery is not straightforward. Make sure the power is off, and i would say 99% it is fine. Some may not agree with what i am saying. If you can find an original adhesive, go for it, but using aftermarket non-genuine adhesive can create issues. So it is better to use b7000/t7000 glue. Again it comes to preference and availability.
Yeah please people disconnect the battery , this person got lucky , you could damage the screen if you hook it up with the battery connected.
Thanks for your feedback..
He didn't solder back the small tab just beside to the left of the home button and he also didn't installed the camera bracket to center and prevent the camera from moving around 😐😐😐