Veto Pro Pac Tech XL Tool Bag | Tool Load out Review | Handyman General Home Maintenance Hand Tools
HTML-код
- Опубликовано: 21 окт 2019
- VETO PRO PAC TECH XL - An overview of the VETO PRO PAC TECH XL for Handyman / Home maintenance or DIY purposes. (Links to all items featured in this video are in the description below).This is a fantastic bag that holds a huge amount of hand tools. The capacity of the Veto Pro Pac Tech XL is amazing, it enables you to be very organised and efficient with the unique vertical storage design.
The Veto Pro Pac Tech XL Tool Bag is ideal for a general handyman / Multi-trade person where a huge varied range of tools is required - the Tech XL is capable of supporting such a need with its multiple storage options.
As with all Veto Pro Pac Tool bags and pouches, this product comes with Veto's unrivaled 5 year no downtime warranty. They obviously belive in their products and back them up with a lengthy warranty which should give you confidence in the product. The are the Rolls Royce of Tool bags and although they are pricey, they are well worth the investment !
I have produced a lot of videos on my Veto Bags and here is a link to the specific playlist where all the videos can be found - enjoy !
• VETO PRO PAC Bags and ...
I am a great believer in investing in quality tools and equipment. These bags and tools are no exception, KNIPEX , WERA , DEWALT and FLUKE feature heavily in most of my bags. Links to all the tools featured can be found below.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting Bacren Property so I can continue to provide you with free content each week!
All items featured in this video can be viewed and purchased through the links below -
VETO PRO PAC TECH XL BAG - amzn.to/2R40qXx
VETO PB5 SMALL PARTS BAGS - amzn.to/3443WGP
MILWAUKEE 12V IMPACT DRIVER (BARE TOOL) - amzn.to/39wSvZj
WERA RAPIDAPTOR BIT HOLDER - amzn.to/2X1xNOk
KNIPEX SCISSORS - amzn.to/3dIYPAh
FLUKE VOLTAGE TESTER - amzn.to/2UWcwmR
HANSON STUD FINDER - amzn.to/2Jt6x3w
STANLEY 8M TAPE MEASURE - amzn.to/2UAGJsw
PICA AUTOMATIC PENCIL - amzn.to/2Uyr5xT
BOSCH GMS 120 STUD DETECTOR - amzn.to/2Ju1Whh
NITEIZE CARABINER - amzn.to/3dLJz5n
KNIPEX PLIERS - amzn.to/3dFMbBQ
KNIPEX SIDE CUTTERS - amzn.to/2X1Prl8
KNIPEX NEEDLE NOSE PLIERS - amzn.to/2X12u6h
WERA ALLEN KEYS - amzn.to/2UBCZa0
WERA TORX KEYS - amzn.to/3aByxxF
STABILA LEVEL - amzn.to/2UR53Fq
STANLEY AUTOMATIC WIRE STRIPPER - amzn.to/2ysgYC7
GRIPIT MARXMAN - amzn.to/2UUwcr1
WERA KRAFTFORM SCREWDRIVER SET - amzn.to/3bJxLig
WERA RATCHETING SCREWDRIVER - amzn.to/3bH6NIc
WERA FLEXI SCREWDRIVER - amzn.to/39B5R6w
WIHA PRECISION SCREWDRIVER SET - amzn.to/2X2bkAM
WIHA INSULATED SCREWDRIVER SET - amzn.to/2UWn70K
WERA TOOLCHECK PLUS - amzn.to/2Jv2dk2
BOSCH GLM40 LASER MEASURE - amzn.to/2ysxJgz
BOSCH MULTI MATERIAL HEX DRILL BIT SET - amzn.to/2Jy3qr2
DEWALT DRILL BIT SET - amzn.to/3dJ0qpL
WIHA STUBBY SCREWDRIVER - amzn.to/3aCagHU
FLUKE T-90 VOLTAGE & CONTINUITY TESTER - amzn.to/39B3Rv6
FISCHER DUO POWER WALL PLUGS - amzn.to/2wbdlji
DEWALT 16oz HAMMER - amzn.to/3bOU5r3
KNIPEX COBRA 250 - amzn.to/2R1oRER
KNIPEX COBRA 180 - amzn.to/2UzcW3h
KNIPEX PLIER WRENCH 250 - amzn.to/2US3JSF
KNIPEX PLIER WRENCH 180 - amzn.to/3dMSIL2
MILWAUKEE IMPACT EXTENSION - amzn.to/39Csk3j
BAHCO ADJUSTABLE SPANNERS - amzn.to/3dKCZMA
FUGI SILICONE KIT - amzn.to/2X863rk
BAHCO 15mm & 22mm PIPE SLICES - amzn.to/2V7gWaD
DEWALT DS 400 TOOL BOX - amzn.to/2V7gYiL
TREND DIGITAL ANGLE FINDER - amzn.to/2Jtg9eD
WERA RAPIDAPTOR BIT HOLDER - amzn.to/2UCA7Km
There are a lot of load out type videos for the VETO Pro Pac bags, but they all seem to be geared towards Electrical, HVAC, Carpentry or Plumbing.I just thought that I would show you how I have set up my bag for Home Maintenance / Handyman type work.
I hope that this gives an overview of the types of tools that can be stored within the bag.
If the video is of any interest, please like and subscribe which will motivate me to produce more content in future.
#bacrenproperty #vetopropactechxl #vetotechxl #vetopropac #vetotoolbag
#propactechxl #vetotechxl #vetoxl
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com
Thank you and I hope to see you in the next video ! 
Хобби
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel by clicking the link
ruclips.net/channel/UC6IWF5LBPAqCwmjXcAGwWJw
VETO PLAYLIST ruclips.net/p/PLfsJaPKE98ID3J5IGQ75KUI8kFQzJ7ZSc
Already subbed ages ago bud I watch all your tool vids
@@danstoolroom7700 Cheers Dan, I have just returned the favour !
@@Bacrenfencing cheers mate and may I say v impressed by your vast collection of vetos. I think we have very simular tastes in tools
I have added Amazon links to all the items within this video in the description. If there are any tools that you like the look of, please feel free to click on the link in the description - this helps support my channel - Thank you.
VETO PLAYLIST ruclips.net/p/PLfsJaPKE98ID3J5IGQ75KUI8kFQzJ7ZSc
Finally got a tech xl On the way v excited about it
Thanks for the comment Dan, the Tech XL is a great bag but very easy overload...........you've been warned 😂 Just been checking out a few of your vids, great channel 👍
nice setup, as a landlord i carry much the same and try to compartmentalise my bags for different purposes. one recommendation (since I haven't seen you show one yet) are the cheap USB endoscopes that work with your phone, an absolute lifesaver in those times you need one; I've managed some tricky cable runs that would have been impossible without it while avoiding swiss-cheesing the walls and ceilings. i also prefer the endoscopes over using a multi-detector (such as at 16:09) as the 5.5mm endoscopes only require a 6mm hole in some plasterboard to give you a view behind the cavity and if you don't need the hole afterwards, a quick smear with some instant plaster filler and the hole is gone - the bonus being if it's a white wall or ceiling you can get away without painting too.
Thanks for the comment Peter. I like the sound of the endoscope, I am an expert at "swiss cheesing" walls 😂. I did look at the dewalt one a while back but could not justify the price. What endoscope do you use and recommend ?
@@Bacrenfencing I have 3 or 4 and they're all generic wired ones which these days are around £10 on amazon/ebay/banggood/etc. The trend now seems to have shifted to the wireless versions which have their own little battery pack but personally, I've avoided them as it's one less thing to charge. I like the 5.5mm diameter one as it can get in smaller spaces but the 8mm versions, on mine at least, seem to have a wider fov which has came in handy in a few instances. I haven't tried the ones with the semi-rigid cables (which may be worthwhile) as I usually just tape it to a cable-pulling-rod if I need it to go beyond a few inches.
One worthwhile accessory is a "lazy neckphone holder" which will hold your phone in front of you to keep your other hand free; good if you're pulling cables, up a ladder, etc.
Very nice! I have the same bag!
Hi Ryan, Thanks for the comment, what do you use your bag for - how do you have it set up ?
Yes, they're great bags !
I'm a HUGE Veto fan !!
@@Bacrenfencing I actually do the same thing as you, own and manage rental properties! I use it for every day general maintenance. I only own one though, a little jealous you have 3 of them! I also enjoy Knipex and Wera tools!
@@ryanfrakes5040 Interesting Ryan, the Tech XL is great for that !
Yes, It is a joy to use Wera and Knipex tools every day, they are fantastic !
The M12 Fuel impact driver is night and day compared to that driver you have.
Hi Dominic, Yes, I am aware of the M12 Fuel and it is on my shopping list for the future. To be honest, I really like the Milwaukee impact that I have as it is only used for very light duty applications but will definitely upgrade to the Fuel in the future. Thanks for the comment ! 👍😀
I've got the MCT, can't decide between this and the tech lc or lc
Thanks for the comment Brandon, I have the Tech XL and the Tech LC and have to say that I prefer the Tech LC over the Tech XL. The Tech XL can get a little too heavy when loaded with tools but the LC is just a perfect size IMO. 👍
Can you ask, where did you get that tool from for prying bath panels off? It isnt on your tool list
Hi, thanks for the comment, it is just a simple pick, you can get one here (4 piece set) amzn.to/31vkLJa
Hope this helps !
I have the dewalt 12 oz I carry in my bag
Thanks for the comment Andre, do you like the 12oz Dewalt ?
I am tempted to get one of those !
I got one for my partner ask me in 3 months
More tools that have never left the workshop..
Yep, never use them, do you want them ?
@@Bacrenfencing absolutely not. I'd hate to deprive you of staring at your tools every night.
@@dywerscollapsedpocket3465 You should try it some time, it may make you less bitter and help with the chip on your shoulder..
Have to say my tools looked like that till the 1 day work I ever done with them ...how the hell can u keep those tools like that ????
@@woodturninguk6134 I have to confess most of them were bought when I bought the bag. I thought the video may be a bit better with newer tools as opposed to old battered rusty tools. When you buy Veto bags, it always makes you want to buy new hand tools to fill them - well in my case anyway :-)