Nerf N-Series Pinpoint Blaster Internals (There's hope)
HTML-код
- Опубликовано: 21 окт 2024
- Nerf N-Series Pinpoint Blaster Internals (There's hope)
Ok, the Nerf N-Series is not exactly my cup of tea, but it ain't that bad...The 20$ 90 FPS, Spring Power, Bolt Prime, Mag Fed Pinpoint Blaster isn't a complete slouch...Just the wrong darts. Now, let's open it and see if I can hope of making it Better, aka a Half Dart Conversion.
Buy Link
www.amazon.com...
Please leave a Like and Comment,
Subscribe for more content,
Don't forget to hit that bell to stay informed on my latest video!
You can always follow me on:
Instagram
/ thatoldnerfguy
Facebook
/ thatoldnerfguy
#nerf #nseries #pinpoint #blaster #internals #mod #mods #potential #new #n1 #blastermod #halfdart #conversion #nerfornothing #nerfornothing #nerfnseries #nerfwar #nerfwars #blastertag #foamtag #tag #thatoldnerfguy
This video was very helpful, I'm a noob, but managed to use your video to pull it apart, seal the tube better, also removed the scope and added the sprinter magazine, now it's super accurate and my favourite so far from this NERF range.thanks.
Glad it helped
The hole in the plunger tube actually allows it to shoot harder with a weak spring, if you plan to upgrade the spring then you should fix the hole. If not, the hole allows the plunger rod to speed up.
I'm well aware of that, but that is just too much...a hole half that size would have been plenty enough and gave us a few mm more stroke. Plunger is a decent size, but they basically "cancelled" 50% of it..We'll see how it goes, so far everything lines up and my Tube fix is currently drying.
Looking forward to your end result! Good luck!
I don’t mind the stock, grip and plunger. I would remove the entire barrel and scope. Convert it to fire standard width darts. I’m gunna wait for better designs to come out before buying anything from the N Series line.
how much does the air restictor removing it help i dont wana if it dont do much
it just help the air get completely out of the tube without premature restriction...without a sealed breach mod, it's not mandatory
I won't get any of the Nerf N series (Elite 3.0)
This is the 1st and Last I buy...but I'd hate to just "throw" this one away... So I'll go back to old school modding and make myself a blaster with it.
I defiantly won’t buy a package of these darts. The blasters themselves might have potential for modders.
@@sweetlikechocothai I think so...already on it!!
I might get one but for integrations since the pinpoint has the perfect shade of red orange that I'm looking for.
Modding was fun when there was nothing else available. Now you can buy better stuff without all the hassle from messing with a hasbro blaster. Those days are over except for the diehards.
Foam Tag/Blaster are a passion for me... including mods. I guess I'm one of those diehards
How to remove the attached barrel, do you have to pry something up? I put it on and didn't pay attention to where the latches were?
Remove the 2 muzzle lock, to access the 2nd one Lift the "Dart Gate" from the shell...be sure to have the bolt backed up to be sure it doesn't engage the lock itself. Don't forget that 1 little screw on the other side of the shell
@@thatoldnerfguy thank u 👍
@@pawelkloc1 No Problem, if anything feel free to ask...There are no stupid question in life, except the unasked ones
Can you upload a vid taking the barrel off ?
TBH I can't... I already cut mine off... quite easy to do with a good cutter knife, it's soft plastic