I honestly do not know how but this actually worked! Just fixed up a tv I found for free by a dumpster 😆😆 thanks for this, didn't expect it to be that easy!!
I have a Toshiba 32HL9330 and will try this soon. But mine does some bad flickering but after 4 or 5 minutes it goes back to normal. When it heats gets ok
Y are amazing thank you so much, it worked for my Toshiba smart TV 65 inches, problem was on the right side, I covered outer 13 pins (pins from left) on problem stripe. Fabulous it is working. Thanks again
Leaving comment in hopes someone else has same problem, as I did not try this (little to complicated for me), resolution change & factory reset did not work. I have a screen fast jump (or flicker) up just a small amount, it does it about every 3 seconds, it starts after the Toshiba TV is warmed up. I am using TV as a monitor, and the strange thing is that while in window explorer the top TABS do not jump or move??? If anyone else is having the same problem and finds a fix for it, please leave a reply comment.
Worked on my Toshiba Fire TV. Same ribbon but I had to put the tape on the opposite end for it to work. Thanks for the help
It's a great tutorial. Details, easy to understand. Thank you very much. Wish you and your family are doing great! Liked & subscribed!
Terbaik cara ni..tv toshiba saya kembali berfungsi..this is the best method..my toshiba tv back to normal.
Thanks for the good tips!!! It wonderfully works 😊
You saved me tv bro, god bless you
Thank you so much, I am able to save my smart tv.
Thanks😊 it's really awesome 👍
Worked. Fix my Toshiba 49u7650vm this way. Thank you from Malaysia 😍😍
Thankyou
Bro.. Tv kita sama.. Bro tape area mana ya?
Awesome!! it actually worked! Thanks :)
Thank you
Terima kasih ilmunya
Very good
Verry good
What's that tape called ? . Doesn't it obstruct the t-con connections on one end ?
Thanks man, your solution still works and my television is back working. 👌 awesome
Very good
Yes
You are a genius, I just fix my 55-inch. Toshiba tv using just tape and your advice, I just put a tape in another corner. Thanks
How much tape did you use
How do you know where put the tape?!?!
@@brusoares9925you must try different small places until the picture is clear ❤
I honestly do not know how but this actually worked! Just fixed up a tv I found for free by a dumpster 😆😆 thanks for this, didn't expect it to be that easy!!
Someone tossed theirs out with a flickering screen 55 inch
Not for me..... now I see no picture at all. Even with the tape removed...
What kind of tape is it?
I have a Toshiba 32HL9330 and will try this soon. But mine does some bad flickering but after 4 or 5 minutes it goes back to normal. When it heats gets ok
Did your probabl3m solved ?
Y are amazing thank you so much, it worked for my Toshiba smart TV 65 inches, problem was on the right side, I covered outer 13 pins (pins from left) on problem stripe. Fabulous it is working. Thanks again
Leaving comment in hopes someone else has same problem, as I did not try this (little to complicated for me), resolution change & factory reset did not work. I have a screen fast jump (or flicker) up just a small amount, it does it about every 3 seconds, it starts after the Toshiba TV is warmed up. I am using TV as a monitor, and the strange thing is that while in window explorer the top TABS do not jump or move??? If anyone else is having the same problem and finds a fix for it, please leave a reply comment.
Ong cũng có cai TV hư
How does covering part of the ribbon cable allow the screen to work correctly?
When we remove one side of the screen cab, we will know which side is damaged. Move the ribbon to see the result
@@PhuongKiLoOm yes I understand that it was the covering the cable . Why and how it gives effect of correcting the issue
@@crazyrayuk36 he fixed it by makining that connector stable thats all , not the covering itself . peace
Does any tape work or should it be a specific kind of tape?
any one tape, the purpose is to cut the voltage through
Thank you :)
Why you put the tape on that's place?
The purpose of this is to cut off the short voltage from Tcon to the screen, leaving the unshorted voltage to feed the panel.
Thanks very much worked on my 60inch tv . But now colour is washed out on the side with the tape . Any ideas if that could be fixed 🤔?
Yeah I see nothing but black screens now... wish I never tried this.
Be careful... this method just entirely removed all picture.... i cant see anything anymore.
Is it a cable problem or a board problem ?
It is panel problem
Bro please your contect no
Bro right side screen jump what problem
Dont trust this.... inspent 30 minutes being extremely cautious and screen wont even turn on any more