Superjet Blowsion Steering System Installation & RRP Bars
HTML-код
- Опубликовано: 15 сен 2024
- Time to upgrade the steering on my 2005 superjet. Got a few suggestions to go with the blowsion system since it will give me the most room after install. We also went with the 0 degree bars from RRP. This is a complete installation video. Review video will come shortly after hope y'all enjoy.
🔻 BUILD PARTS! 🔻
Yamalube Oil- amzn.to/2TOcnVK
Reeds - amzn.to/3AP7X1M
Finger Throttle - amzn.to/3jVPA5g
Steering Cable-amzn.to/3hP9yM2
FTC DISCLAIMER: Coyote Chris is a participant in the Amazon Services LLC Associates Program, the eBay Partner Network, and other Affiliate Programs, an affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to the company's website.
"Due to factors beyond the control of Coyote Chris, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Coyote Chris assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of our videos. Due to factors beyond the control of Coyote Chris, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video or any of our videos is the sole responsibility of the user and not Coyote Chris."
Just the info I was looking for! Was considering going to OVP steering and after seeing this I think I will do the same setup 👍
Glad the video could help.🤘🏼 I know I did not emphasize greasing the bearing in the video but definitely add grease. 👍🏼
@@CoyoteChris Just ordered the RRP steering, bars and finger throttle to go along with the solas impeller I picked up. Should be a fun little budget build
Just my opinion, it’s mostly preference. Myself, running stock. I could see doing this when the stick unit is worn out.
The main reason I did it was to gain more room in the tray. Plus I refer the straight bars of the stock racked bars.
I know this is a old video but how do you like the straight bars over the stockers?
I love the straight bars and would highly recommend them. Weird at first but I love them now. Road the stock blue Superjet this summer and couldn’t stand the stock bend. 🤘🏼🔥
@CoyoteChris lol!! I'm building my son a superjet now. I didn't know if they were worth the investment. I love my blowsion blaster bars but wasn't sure about a straight pipe haha. Thanks for the info as always man!!
Your welcome!
How do you keep ur pole stand up ? wanna send me the website link please
No sure exactly what your asking? The stock Superjets a have a spring and pin that hold the pole up.
What helmet are you using? I need some protection after bouncing my face off the end of the bars lol
I’ve got a video coming out next Sunday with my setup I use. It’s a full face bmx helmet. 🤘🏼
How you finding the setup since the install.. Could you cut away on the inside of the chin pad to maximize the steering.. Looking at getting the same setup for my ski
I was able to cut some material away from the chin pad. I still could not adjust to the maximum adjustment. I do like the setup very clean and easy to install
Thanx for the reply..... Do you find the steering more responsive and quicker with the new steering system and straight bars
It’s definitely more responsive and the straight bars made a big difference too, just took a little getting used too but I like them. 🤘🏼
Did you get some issues with the Cable steering? Or with the stop steering?
I had issues with both, the cable was bad before I installed the kit once I replaced the cable that was good but the adjustment was hitting the chin pad mount. I was able to grind a little away on the chin pad mount to get most of the adjustment.
@@CoyoteChris Okey. I have the exact problem on my ski. So you are using The standard Cable steering? I think The modification on the chin pad Will be pretty big😄 Can you send me some picture of your ski or do you have a video on that?
Thanks for your answer👍🏻
The ski has the stock cable and at the moment the ski is completely torn apart doing rebuild, but I can send some pictures of the chin pad mod. Find me on Instagram @ coyotechrisrebuild. Send me a message and I will send you some pics.
Dun mine
🔥🤘🏼
did the rrp bar have a hole for the killswitch tab? looking to get this bar and odi lock ons for a wave blaster 1. thanks
No the rrp bars do not have a hole but you can drill one or just remove the tag from the switch. Very easy mod but I’m not sure I would install straight bars on a blaster 🤘🏼
been boating for 20 years, but new to skis and always wanted a stand-up. the local used dealer talked me into taking the plunge on this waveblaster 1. the first time out was hilarious for everyone else. luckily i found your channel and chixwithtrix and both have helped me get going. has been awesome one i learned to balance at idle. have you found any blurple touchup paint?
That’s awesome thanks for watching, blasters are a ton of fun. As far as the paint I haven’t tried to find any but I’m sure you could take the ski to a auto paint repair place and have them make you some.
10-4 thanks for all the help!
Anytime 🤘🏼🔥