Best Glass Welding Cups for $20? Tig VS Tig: Welding Challenge Ceramic VS Glass | RX Weld Lens Kit

On tonight’s episode, Tiig VS Tiig, a head to head challenge. Come see what antics Fred and the crew are getting up to, and stick around for a hands on review and a practical product comparison.
Please Like and Subscribe, share and leave us a comment, please keep it constructive and family friendly.
See the link below for the product featured in tonight’s episode:
www.amazon.com/RX-WELD-28pcs-...
#Welding
#Tigwelding
#Metalart
#Metalsculpture
#funnyvideos
#tutorials
#howto
#handmade
#art
#productreview
#everlastwelders
#lightafirestudio

[@LightaFire_studio]

It has come up that I didn't mention argon flow rates thanks everyone for letting me know. I pretty much always weld at 15 CFH of argon for mild steel, and I left it at 15 when I switched cups. I generally always do 8-10 second post flow (unless my tungsten is turning blue then you need more post flow), and my machine doesn't have pre-flow. Thanks for watching! Thanks for the questions

[@jondavidmcnabb]

OMG this is truly funny if you are a TIG Welder!!

[@kinzieconrad105]

You can make a gas lenses from sink aerators $.15 a pop you are all welcome. Though if you control the air currents in the area you are working you can turn the gas down a bit and save some $$$ over time. Also found that controlling ambient air conditions the lenses become unnecessary. But they help when you are starting out.

[@LightaFire_studio]

Thanks for the tip, I'll have to look into it. I'm all about saving $$$ 😁

[@ChristineKoleski]

Great video Funny and useful, thanks

[@LightaFire_studio]

Glad it was helpful!

[@JeffFranklin-bv3np]

🙃😛 not Bad, think i'll take a look at the Rx kit

[@arccaptain-weld]

Hello，Thank you for your interest for our mig machine，now there are less stock for the mig200 . Would you like to review the mig130 machine?

[@LightaFire_studio]

Absolutely! I'm interested in trying everything you guys have to offer. Contact me at [e-mail] and let me know how to get in touch? Thanks for the opportunity. Fred

[@paulmuff9883]

Tip: leave your torch and rod over the spot you’ve just finished close & don’t wave it around!

[@LightaFire_studio]

Thanks for the tip. 🙂

[@brianswelding]

Just curious what your flow rates were? Thanks for the video! And how much more Argon was expended using the lenses vs regular cups?

[@LightaFire_studio]

I pretty much always weld at 15 CFH, and left it at 15 when I switched cups. I generally always do 8-10 second post flow, and my machine doesn't have pre-flow. I'm not sure there was a huge change in the gas expansion, sorry if that's not a useful answer. Thanks for the question and thanks for watching!

[@brianswelding]

@@LightaFire_studio Thanks! Was just curious. I run at 15 pretty much all the time also.

[@freeidaho-videos]

When you talk about settings, you need to know the gas flow rate too.

[@LightaFire_studio]

Thanks for reminder. I pretty much always weld at 15 CFH and my post flow generally stays at 8-10 seconds. My machine doesn't have pre-flow. Thanks fir watching.