Industrial Design with the Power Surfacing add-in for SOLIDWORKS®
HTML-код
- Опубликовано: 11 сен 2024
- Download a FREE 30-Day trial of the Power Surfacing RE add-in for SOLIDWORKS® today: bit.ly/PowerSu...
For more information visit: www.NPowerSoftw...
Video brought to you by the talented Hëshäm Ashräf! ( Check out more of Hëshäm Ashräf's designs here: / hesham19999 and / @heshamashraf936 )
Music Info: Piano Inspiring Dream by RomanSenykMusic.
Music Link: • Piano Inspiring Dream ...
I like this add on. how about cloud based sculptor? i gues they are not yet on the same level... I have heard that cloud is the future, what about your package then? will be somehow embedded into solidworks cloud platform?
Perfect!!👏👌👏👌
Thank you SO much!
tasteful
This is awesome. Can you go back and edit the sub D body after converting it to a solid if you need to make changes?
Yes, that is the great advantage over traditional surface modeling techniques. You can make changes and it will not blow apart.
How to do pirticular tangent and radius...
Amazinngg... 😍😍🔥🔥
How much time did it took to complete?
30 minuets
@@heshamashraf936 Awesomee... 😍
@@harisshaikh8993 Thanks!
So talented!!!
@@npowersoftware6638 ❤️❤️❤️🔥
wow NICE!!!!
Thanks so much!
Big Like
Is this regular solid works?
Yes with Power Surfacing Add-In
Power Surfacing 6 is very difficult to shell or thicken
On the contrary, it is the best and fastest Add-in software in these two things.
Solidworks sometime can't thicken parts and give an error,
But power shell is not.
@@heshamashraf936 powershell takes a long time to shell and thicken，and the surface it create is poor quality. Power Surfacing 6 has many great functions，but Freestyle in Creo 7 is much better in these two things.
@@yeasuitea4928 you have ability to control the quality from the side menu.
yea suitea _That would depend upon the suitability of a model for shelling or thickening at a given offset._
_Considerations like _*_small radii of curvature, absorbed faces, singularities and cusps_*_ are often overlooked._
_SolidWorks is generally quick at shelling and thickening when the aforementioned irregularities are addressed._
How to give dim in power surfacing
Using Sketches or surfaces in Solidworks and use it as references.
First you should rotate the part in all direction and show what you are going to do.
Its not like that in Subd
Thanks!