How to Convert from 110 Volt Plug and Play to 220/240 Volt 50 Amp GFCI(TUFF SPA) BalBoa Pack Hot Tub
HTML-код
- Опубликовано: 8 сен 2024
- How to Convert From 110 Volt Plug and Play to 220/240 Volt 50 Amp GFCI TUFF SPA with BalBoa VS Pack Hot Tub...In this Video I will show you in detail Step by Step how to convert a BalBoa VS Pack from 110 volt Plug & Play to 220/240 Volt Hard wire with a GFCI. Now not all packs can be converted...So before you start shut off the breaker or unplug the spa once that is done remove side panel and find the Pack after you locate the Pack remove the cover and read the Schematics on the back side...If you are unsure how to locate the Pack or if it can be converted call the manufacture or the dealer for more info...Once you know for sure you can convert then you can move forward with the process and I hope this Video give you all the answers to help you with the process.
Tuff spa as well as several other companies use BalBoa VS packs and there product. In my option it is one of the best products on the market and is very user friendly...Alway make sure that if you wire your Hot Tub 220/240 that you use a GFCI with four #6 wires and a spa disconnect no closer then 5 feet and no lower then 36 inches and in the line of sight of the Hot Tub. If you need help with wiring a disconnect you can check out my other videos on that topic.
Tuff Spa... How to convert from 110 Volt Plug and Play Hot Tub to 220/240 Volt 50 AMP GFCI BalBoa Pack. BalBoa VS
As always Thanks For watching And Please LIKE , SHARE & SUBSCRIBE
ArizonaHotTub Factory.com
ArizonaHotTubFactory@gmail.com
Tuff Spas - Хобби
Well done. I kept tripping the breaker until you taught me to take the cross wire off and change the heater setting. Saved me hundreds from calling in an electrician.
Glad to Help..That was the true purpose behind this channel was to save home owners time and money.Thanks for Watching & SUBSCRIBING
The best 120/240 V conversion video hands down! Thank you!
Thanks Scott you made my install a snap with your great directions......
Thanks For watching and subscribing...
NICE COVER! havent seen that before
Great video! I have a plug and play tub with a Balboa pack and been wanting to convert it. Thanks for the great detail
Great video. Easy to understand. I appreciate the reinforcement as you go. Sure hope this works!
Thanks for Watching & SUBSCRIBING
Great video. Thank you
Thank you for the tips
Thanks for Watching & SUBSCRIBING
The removal of that white wire wasn't in the instructions I had for my tub and had us stumped. Thanks to this video we were able to figure it out, had everything correct except for the removal of that white wire and we kept tripping the breaker.
Glad our videos Helped you...Thanks for Watching & SUBSCRIBING
I don't how you don't wear knee pads 😬 I'm 33 and I need them kneeling on concrete. Thanks a ton for the information.
Excelent Information!!!!!!!!.
do you have a video on how to remove that spcific model of pump and control panel for repair? can't find a "how to " anywhere
Check out my other videos and you will be able to figure it out from them..
Thanks for Watching & SUBSCRIBING
Thank you sir
There a sticker that came with my unit that says it requires a 50 amp 220 circuit and a 20 amp 120 circuit. Based on your video It sounds like you can use one or the other but not both. I certainly don’t see any connections for two independent circuits
You might want to call Scott at the shop and he will be able to get you going in the right direction. Thanks for Watching and Please Like & SUBSCRIBE
I have an older Hot Springs Jetsetter that I'm converting to 220/240v. I have the new wiring in place but do I need to change the dip switch settings? The wiring to the terminal block looks to be from the breaker to go to black wire to #2 white wire to #5 and ground to ground bar. Where does the red wire go? Is there any white wire to remove as you've shown on the balboa?
@SPA MAN do you have a video on how to remove that spcific model of pump and control panel for repair? can't find a "how to " anywhere
Great video!
This was so very informative !! Thanks for the info. Very good !!
Very well explained, thx.
What about motor for pump doesn’t it need to be rewired too?
Great video. We converted ours last year. So nice to have the heat on high but ever since the conversion we have been encountering a low flow/dry code when running on low. Super bummer to not have it to heat at all times but nice to be hot with the jets on. Any idea if you need to upgrade your pump when doing a conversion on a Dream Maker?
Great video, I’m working on a vs300 and I am having some issues wired it to 240 and when I turned it on cold light stayed on and would not heat, pump worked and voltage readings where good
Tomorrow I plan on restarting persistent memory j43 and mirroring the switch settings in your video any other pointers?
I have a question on wiring a 3 wire 220v jacuzzi to a gfi disconnect. What do you do about no neutral between tub & gfi disconnect breaker. I understand I need to have the disconnect regardless if 3 or 4 wire but confused on the hook up at disconnect. Can you please shed some light on the subject for me.
Thanks. Love your videos..
You put the GFCI in the main panel and run the 2 hots the neutral and the ground to the sub panel ... from the sub panel to the hot tub you would run the 2 hots and the ground...That will pass code. Thanks for Watching & SUBSCRIBING
Thanks for the video Scott, I see you a VS300FL4 is the wiring any different for a VS300FL5 again thank you for your time and help
to clarify, are you running a #6 wire as a ground too? about the 4:55 mark you state 4 #6 wires.... I assumed you could ground with normal bare copper wire. so three #6's and a copper ground. that right?
NO...I alway run #6 wire on all of the wires from the Sub panel to the Spa....Sometime I have to work on Spas that have 6/3 and it just causes problems( Those are my spa owners that have the most service calls) If you are a home owner that has 6/3 for your wiring and you are not having trouble...Its just a matter of time and most spa techs over look what type of wiring is being used in a Spa ...Hope this Helps Thanks for Watching & SUBSCRIBING
None of these TuffSpa YT videos show the best way to bring the 220V cable into spa from outside since TuffSpa does not provide a knockout or access
Well I've been doing this for years and have never done two that were alike. As far as the best way to bring the 220 to the tub there really is not a wrong way. I always set the tub on the ground and then figure out the placement of the stairs and what seats I like best as to what I will be looking at in the tub while soaking (You never place the tub as to were the electric is coming out at....Place the tub on the ground then wire it accordingly) As far as knock outs 1 inch hole saw will do the trick.
And for the record I do have a video that shows how to cut a hole in a Tuff Spa and wire it.
Thanks for Watching & SUBSCRIBING
ruclips.net/video/SV2thROQFbU/видео.html
Go to 11:00 of the video or watch the whole video start to finish. Hop this Helps
Hiya! I am hoping to convert my Monterey Freeflow spa from a 110 to 220. It says it is "easily convertible," so I assume the instructions here will be basically the same for my Freeflow. Is that correct? Thanks!
What should circuit amp be for a 110 to run jets,heater,lights
I recently did this conversation on my tuff spa. Now it randomly trips the breaker once and a while. Sometimes once a day and sometimes it’s fine for a few days. Any suggestions
I hooked up my plug-and-play spa with 240 40 amp with eight three wire and I keep blowing the circuit
You have wired it wrong.. give Scott a call tomorrow and he can help you out and get you going in the right direction. Thanks for Watching & SUBSCRIBING
Great video! In order to convert from 110v to 220v, with this balboa pack, does the motor have to be dual voltage? I have an older hot tub (Great Lakes) with a Balboa Pack and I want to replace the Sta-Rite 230v motor. I want to run 110 volts to the tub. Would I need to replace it with a dual voltage motor in order for this 110/220 swap to work, or will this technique work with just a 230v motor only?
You have to have a pack that is able to run both ways 110 or 220 volt. you will have to have a motor that is 110 volt and there are some wires that need to be moved in the pack as wells one DIP switch. Thanks for Watching & SUBSCRIBING
I followed the video exactly as shown. The heater is not working. Does the persistent memory need to be reset. Any help is greatly appreciated.
Call Me at the shop...I have several Questions and depending on the answer will determine how to fix the problem.
@@spaman5440 does this apply to a artisan spa st kitts model..its 110v now converting to 220
So can any 110 be converted to a 220?
No...It has to be a compete spa package that has the option of running 110 Volt or 220 volt. Thanks for Watching & SUBSCRIBING
Is any bonding required when converting?
Does this apply to an artisan spa st kitts model
Im not sure what spa pack is being used in Artisan Spas.
I converted to 230v do I need to replace the heater and the motor?
The only way to convert is if the motor is a 110 motor if it is a 220 volt motor it will not work. As far as the heater goes..It needs to be a 1.0 / 4.0 heating element for the best performance.. Ive seen it done other way but it doesn't work right in my opinion. Thank for Watching & SUBSCRIBING
@@spaman5440 My 115v motor and pump went out 1 year after conversion.
I called the manufacturer, and was told to put another 115v motor, when my spa is already converted to 220v.
So I was a bit lost
I'm actually going from 220 back to 110. What size breaker should I use for 110
20 Amp... Check the owners manual just to make sure...
Is this the same for aquarest spas? Should I hire any electrician to do this or should I call a spa store and have them send a tech?
Spa Tech would be better...Most electricians don't really have the experience with this. Hire someone that knows what is going on with Spa and Hot Tubs...Thanks for Watching & SUBSCRIBING
@@spaman5440 yea I’m prob gonna throw some cash at some spa store tech because I’m 3 hours from any spa stores. Hence why I bought from wayfair. Thanks for the info! Aquarest doesn’t even give instructions to convert theirs. I’ve read the manual 2x cover to cover and it doesn’t mention that. It does mention it can be done. Fun fun.
@@cbdislife2514 If you have a problem getting it done give Scott a call at the office tomorrow and he can get you going in the right direction...