How To Make A Homemade Belt Sander [ Angle Grinder Hack ]
HTML-код
- Опубликовано: 24 сен 2020
- Power file from angle grinder, angle grinder hack - call as you want! For me, this is a very useful homemade attachment to my angle grinder. What is more important - this attachment was made with minimal tools and without a welder.
Similar bearings 22x8x7: bit.ly/2G2MhHp
Music by Epidemic Sound (www.epidemicsound.com)
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. 
Хобби
Absolutely fantastic!!
no welding at all!!
cheers mate!! :D
*This is exactly what I needed for trimming the edge of oak boards **MyBest.Tools** I also used the disk to round edges while building an oak - walnut cabinet.*
I WANT ONE! I used to use these in my job as a shipfitter and they were in high demand as there were only a handful to go around, They were called Dynafiles and were air powered. I can find many uses for one and I can make one out of my spare grinder and adapt it to my air grinder. Thanks for a great idea!
Before buying this sander I would use a rotary sander ruclips.net/user/postUgkx3Pc2vLXfcgM5oIpF1iYcIWyFhHUC-G6v and didn't see the need for a belt sander. Boy was I wrong. this belt sander does the job quickly and gives a professional finish to the wood work.
I watched every other DIY video out there for a "Simple" way to make your own belt sander, and they are all WAY too elaborate & time consuming.
Then I watched this one!
THIS video is the ONLY project that even comes close to being:
1. Simple (few easy steps)
2. Practical (e.g. - doesn't require arc welder or expensive drill press)
3. Inexpensive (I already have everything except the bearings)
4. Do-able (I actually have the skills to pull this off! 😂)
WELL DONE!! 👍
This design for this project is genius!
I plan on making mine this weekend! 😀
Excellent little mod and one i can do as i have a couple of mini grinders like that one,so thanks for sharing as it is very much appreciated.
Much love and respect from the UK. ✊🏾💪🏾👍🏾👍🏾👍🏾😉
Wunderbar! Überaus praktisch besonders auch für Akkuflex und Holzarbeiten. Sehr gute Anleitung zum Nachbauen. Danke!
One of the best such attachments !!
k idea tan perrona y facil..........muchas gracias compare.......saludos from reynosa
Excellent! Produced without welding and lathe, good job
That's awesome, I just happened to have bought two of those Bosch angle grinders some time back just because they were on sale. I didn't particularly have a purpose in mind for them, I already have a Milwaukee that I use most of the time.
I now know exactly what to do with one and a good Idea what to do with the other. Thank you 😊
... молодец парень, отличная приблуда, пожалуй сделаю себе такую-же, здоровья тебе и удачи во всём!!!
mate, that's brilliant
This is awesome. A simple but beautiful design. Thankyou.
This is a very helpful video, more so, because it is for us who have limited resources. Thank you so much.
כל הכבוד.עבודה עם מחשבה גאונית!!!
Very good project,simple and useful.Thanx.
The quality of your videos is outstanding, always making me learn something new
Bellissimo video grazie dall'idea spiegato alla perfezione
Awesome idea works great
Man that’s sweet! Great job! 👍🏻
so I need a belt sander to make a belt sander, awesome. thumbs up
It's a joke I guess.
If it is not a joke it may be necessary to clarify that, if you have a sander, you can use it and if you do not have one, you can put the sandpaper on the table and rub the piece against it.
When the wise point to the moon the ignorant looks at the finger.
If it's just a joke, excuse me.
@@Piterworkshop Im trying to teach my dogs to look where i point .. with some success! They seem to not care for the moon at all though. I'm very disappointed they don't howl. That would be something we could have in common but no :(
😂
Very good thing for workshops
very nice.
thank you.
Great job
Clever. We shared this video on our homemade tools forum this week 😎
So making one of these. Thanks.
Thank you for sharing GODBLESS
Thank you
You are a very clever man your parents must be very proud of you not only your design but without any welding thanks for sharing A+++++
Nice build
Nice work done 👌. Thank you very much for giving such wonderful ideas. I need one and going to make one for me
Молодец!!! английский не понимаю,но видео очень понятное!!! Лайк!!!
Very cool.
Ficou ótimo, parabéns!
Very good!
wow.... good idea my friend
Excellent
Fez com capricho, showww!
maestro!!!
Good job mash'Allah
Good idea.
That is class 👍
Excellent job great video🤠👍
Вполне понятно объяснил, хотя ни слова не понял. Работа классная . Лайкну .
Eu traduc ori ce limba pe gugal.io sunt roman,iar limba,meseria,zona nu ne separa.
دست گل شما دردنکند استاد خیلی جالب وجذاب بودکارت
very cool thank you by the video.
Very good 👍.
Great instructions on how to build a handy tool. Your channel deserves more subs!
@ Jeff R,100% in agreement with your comment,more thumbs up needed and less down,smh.
Thumbs up to your comment too.
good job
Tuyệt vời!
Well done :)
: very beautiful view
: good luck my friend
Very nice
Amazing my friends 👍
bravo
Good job!!👍👍👍🥰🥰
Молодец, просто и недорого.
Nice vise
Fantastic. Excellent. Plz tell the size of the square tubings you used
good
Vvvvvvv good
A qui Brasil gosti muito parabens
I need to make such a grinder to get into some hard to reach places. I could wrack my brain for a couple of weeks and come up with something, but It wouldn't be this simple, functional or good. And I would get a headache. Plus I would spend all the time for thinking and only use it for a few hours, never to use it again. Thanks for your video and the idea !
Very nice , engineer
Pretty fantastic work, dude!!! 😃
Looks and works great!
Stay safe there with your family! 🖖😊
😊😊Wow your ideas are impressive. keep up the good work. Thank you
Master Bosch.
Greate!
absolutely genious idea! congrats!
I agree. Simple, but elegant.
This design was well thought out.
Super 👏👏👏👍👍👍
neat
Very nice thank you, but isn't this running the opposite direction as should make it very unsafebecause the sparks can bump upwards
Drill some dimples into that nut. And when the epoxy sets it's not just friction but interference that holds it
Cool
More videos please
Wow
Very nicely done, bravo !! I subscribed to your chanel.
👍👍👍
Please modifi underground cooler
Eeee Mai freen 🔥🔥
Why not you make and sell this online. We are ready to buy
😱💪
wow generally these things are so oer complicated and prone to failure its a complete waste of time. but that design seem excellent simple yet beefy
👍👍👍😊
bardz faine i proste zrobie sobie podobne albo trzy a co a jak nie moge moge pozdrawiam kris pl
Show your work space
Modifi underground cooler project please
I am really impressed with that. But if I did it, there's no way the tracking wouldn't be off.
Falo covoce do brasil gostei tanto que te peso se vose poderia mandar as medidas para mim eu trabalho oje pintando grades e portas de fero esta idei encaichou sertinho nas grades me ajide obrigado fique com des
👍👍👍🤘
مرحبا
الا تنفتح الصموله اثناءك العمل لانها تدور نفس الاتجاه؟؟
Baut nya ukuran berapa Tulang...
potrzebujesz szlifierkę taśmową, żeby zrobić szlifierkę taśmową. ekstra.
Музыка супер.Певица ?????????
You can buy this attachment online for about 10 USD
What if the tape doesn't run perfectly and comes out what could be done? Thank you
Get a longer spring for more tension, might work.
Or perhaps the shape of the Barrel needs to be more pronounced?
@@jackweubanks uhm I think i should have some type of adjustment. The belt moves to one side and comes off the rollers
Wo
Deicheme te faser uma pergunta quanto e que voce me venderia esta esteira adapitaveu a uma lixadeira moro no BRASIL fasa a coversao de dinheiro para moea cruseiro esperoresposta pois trabalho pintura de grade e me vai me ajudar muito obrigado
♥ ♥ ♥ ♥ ♥
★ ★ ★ ★ ★