Icebear Champion 125 Petcock Bypass - into a good ol' Briggs and Stratton fuel valve

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024

Комментарии • 16

  • @SF-wi1of
    @SF-wi1of 3 месяца назад +1

    Thanks for your reply, yep no garbage in fuel lines or carb, starts instantly, runs for 8 minutes then starts starving, possibly running on fuel in bowl then not getting enough through lines. Lines are small clear fuel lines and using a nibi n 26 c carb.

    • @mrstangblb
      @mrstangblb  3 месяца назад

      That's wild - when I first got mine I could barely get mine to crank, then it would finally run, and after running it wide open for a stretch it would just die.

  • @texling93
    @texling93 2 года назад +1

    On mine it was the grit in the tank from welding tank together I guess. I've got 700km on it so far. Had to take apart petcock was plugged up solid after running. After cleaned out has had no problem with enough fuel. The tank lined with paint of some kind may flake off. It was no fun taking tank out to clean. The problem is getting tank back in place without messing up something else. So I recommend just leaving in and adding filter like you did. I put Kenda tires and I am well satisfied with the ride now. They are a lot of fun to ride

  • @SF-wi1of
    @SF-wi1of 5 месяцев назад +1

    I'm having the same problem, 1 mile away it is starved for gas. I put the T in and bigger fuel valve. Is it a gravity thing? Fuel line is low near the frame then has to route up towards the carb. Can't figure out how to post a picture.

    • @mrstangblb
      @mrstangblb  5 месяцев назад

      Did you clean the tank completely? Hopefully it's not any of the tank paint getting in the jets.

  • @1972mercurycougar
    @1972mercurycougar Год назад

    Others, have been doing original CT70 petcock change.

  • @AllLifethingschannelyt
    @AllLifethingschannelyt 2 года назад +1

    Was the icebear engine crap at first or what’s the best

    • @mrstangblb
      @mrstangblb  2 года назад +2

      The engine is good. You have to be patient with the transmission because it shifts rough until about 300km. The stock carburetor isn't very good.

    • @AllLifethingschannelyt
      @AllLifethingschannelyt 2 года назад +2

      I changed the break in oil after or right at 300km 187.5 miles but a icebear rocket 2022 and runs perfect it stalled before but now awesome did both gear box and engine oil did you you should try it on your next clone

    • @mrstangblb
      @mrstangblb  2 года назад

      @@AllLifethingschannelyt I agree - I changed the oil at 100km to Rotella, and I changed it again at 300km. Thankfully Rotella works really well and it's inexpensive.

  • @stacyroyal9452
    @stacyroyal9452 3 года назад +1

    Just curious where did you order your bike from I live in Boiling Springs, sc

    • @mrstangblb
      @mrstangblb  3 года назад

      From Alan Adams at CajunMaddogs.com. Best customer service in the nation! $1350 shipped to your door, and I'm in Greer. Might take a while with the shortage of dock workers and all, but check it out. There's a very helpful Icebear Owners Group on Facebook - 1800 strong and we can all help you out! Or if you want to buy mine I could order another one.

  • @shanemorris1678
    @shanemorris1678 2 года назад +1

    What kind of gas have you been using?

  • @Chris-ck1fo
    @Chris-ck1fo 3 года назад +1

    Nice vid. That looks like it cleaned up your fuel flow issue. Your bike is a bit too clean though...:)

    • @mrstangblb
      @mrstangblb  3 года назад

      That's for sure - and I haven't washed it since I bought it! Road riding except for just a little in the yard and it still looks new.