HP Victus/Noctua Ventilation Mod!
HTML-код
- Опубликовано: 21 авг 2024
- Adding a Noctua Redux 80 to the side vent of an HP Victus 15L Gaming PC
PC Review video: • Killer Gaming PC for C...
PC Specs:
AMD 5600G CPU
EVGA 1660 Super GPU
512GB NVME SSD
300w SFF 80+ Gold PSU
16GB Team Group TForce Delta DDR4 3200mhz RAM
1TB WD Blue HDD
1 80MM NOCTUA REDUX 80 CASE FAN!!
#gaming #pc #noctua #computer #mod #upgrade #howto #tutorial #review
I had a pack of EZDIY 120 mm fans, so I was able to fit one of those on the side while mounting the control hub next to the PSU. Now it moves air and had RGB (went red for AMD) Temps under load stay around 70/75 for both the GPU and CPU.
Nice! Anything you can do to improve the airflow in this pc helps! 🤣
Wouldnt it make more sense to switch both fans? Because better intake and outtake would help the cpu too?
It would. I just mentioned the side vent in the main video and someone asked if I could show an install
@@bradfordskeldorado Ahhh thats nice😊
Sorry that I missed your comment from so long ago. Hope you're doing well and merry Christmas!
Man you're awesome, keep it up
Comments like this keep me going! Thank you!
I removed the smaller exhaust fan and replaced it with a 120mm also drilled more holes all tje way around so it had more airflow coming out. Then added another 120mm fan to the vented side panel.
Heck yeah! I bet that thing stays really cool now. That little rx6400 stayed hot when I first tested it 🤣
@bradfordskeldorado yeah i have a rtx 3060 in it. Still kinda up there but not bad. I want to try and fit a aio in it lol
What’s the link to the 120mm fan you used?
@impulse2364 i just used corsair fans that i got from bestbuy. Any 120mm fans will work. Also grab a splitter since theres only one fan input
I used an 80mm fan from noctua
Hey, will a 92mm fan fit in that same spot?
I believe it will. I had room for a bigger size and I'm pretty sure I have had another person mention adding a 92mm fan in the past
@@bradfordskeldorado oh ok thanks! I want to get this pc for like a workstation that I will have to leave on continuously for a long period, and the pc will be in a small room, so I’m trying to add as much cooling and airflow as possible
Yes it can. I have a 92mm fan installed on the side mount.
@@CargoPantsLuvr ah alright man thank you
I had to get a 92x14 one because the 92x25 got stuck on my gpu.
Uhm so I know this video is old so I dunno if you can reply, but I'm curious. I'm planning to get a Victus 15L. I have wired headphones that need a USB-A to connect. Can I connect them anywhere else apart from the front? This is because the PC will be on the right, and the wire comes from the left headphone. It's going to be annoying so just asking! Thanks a lot and love the video!
There are 4 usb ports on the back. I believe 2 2.0 and 2 3.0 ports
@@bradfordskeldorado Thanks!!
Would you recomend this pc? Im wonder if i should buy it or not, great vid btw!!
Yo! Thanks for the feedback! This is all dependent on what you intend to do with it and if you find it around the current $400 price. I love this little pc for what it offers but if you're looking for high-quality graphic settings and something like streaming games then I would recommend going with something more powerful and adaptable to upgrades. This pc is great but it only has a 350w power supply so you can run the RX6600 but that's the limit you can go. It's great with this gpu but if you think about the $400 price plus a $220 gpu, then you could probably build one for that price that performs better. This is a lot but hopefully it's helpful.
To clarify, great pc for light to mid level gaming and browsing, or streaming just a camera/youtube reaction content.
@@bradfordskeldorado thank you man, this really helped out
i just want to play some games like valorant and so with my friends, i dont mind to play with lower to medium settings as long as it doesnt lag ya know?
so i think imma bet on this one
Thank you for your attention new subscriber here
If you need anything else, let me know!
My cpu was getting to about 80, and i noticed my single fan amd gpu was creating a lot of heat. I reversed the fans, so intake on back panel by cpu, exhaust on the side panel. Decreased my cpu temps by about 10 degrees
That's interesting about the fan direction. These little gpus don't have much of a heatsink to spread that heat amd that little fan on them doesn't do much lmao. Not sure how familiar you are with computers but you could probably drop that cpu temp even more if you pulled the cpu cooler and reapplied new thermal paste!
@@bradfordskeldorado I'm pretty new, always thought about a new cpu cooler in general. Just don't want to mess anything up lmao
So as far as the factory cpu cooler, the motherboard has threads to install the cpu. Most cpu coolers have a backing plate and hardware that join the two together. I can do some research and possibly see if I can get one to work with this motherboard but I would first just remove and rapaste this one to help it for now.
@@bradfordskeldorado okay thank you man, I've heard to get certain coolers to work. The whole motherboard needs to be taken out to install the brackets to it. That sounds like a big pain
It does but if I can find a solution and do something like flip a bracket to get it to work then I will make a short and post the link in this comment!
What is the exact name of the fan splitters you used?
Please need to know soon 🙏🏽
JBtek All Black Sleeved PWM Fan Splitter Cable 1 to 2 Converter, 2 Pack a.co/d/247datL
@@bradfordskeldorado thanks a lot
@@BenTren2008 anytime!
hi, will there be space for a 92mm fan, or can only 80mm fan fit? And also, is there any possibility to mount a second fan right above the first one, that you put? Thanks!
92mm fans work great for the side and the rear if you wanted to replace that one too. I haven't measured or tried to find one above the side fan.
Suggest to replace all fans with Nactua.
This is the first time I've used Noctua and I'm a fan for sure! The cpu cooler is 80mm and the rear is 92mm for anyone interested! Great suggestion!
@@bradfordskeldoradoI replaced my back outake fan with a 120 noctua. The screws don't fit however its snug and not going anywhere. Highly recommend switching it to a 120
What is the model of the fan you used in video im looking add this into my build
It's the Noctua Redux 80mm. I think I got it on Amazon for $13
Noctua NF-R8 redux-1200, Ultra Quiet Silent Fan, 3-Pin, 1200 RPM (80mm, Grey) a.co/d/cgiOxWx
@Bradford Skeldorado hey how did you wire the fans btw. I have them wired up to the splitter but the noctua doesn't start unless I nudge it with my hand
That's strange. Mine would spin at first, pause, then start up after about 10 seconds. Did you try plugging just the 80mm fan without the splitter? Should be any different from mine but it's hard to tell if there could be a power draw issue
@Bradford Skeldorado yeah it is strange, I played around with it and found that if I plug the 4 pin header into the noctua and the 2 pin into the main rear fan, it works just fine but then my rear fan blows at full speed
Una pregunta de cuantos milímetros tiene que ser el ventilador 80mm o puedo 120mm 140mm?
I uses an 80 but I belive you can use a 90 or 120.
@@bradfordskeldorado otra pregunta tiene que meter aire o sacar aire ? Muchas gracias
@@bradfordskeldorado tyyy
I set it to pull fresh air in and to help cool the inside! Hope this helps and let me know if you need anything else!
Can you create a tuto for go to bios ??
Mash escape
What kind of fan splitters did you use?
I used a 1 to 3 fan splitter. I'll post a link
amzn.to/4c6a9TN
@@bradfordskeldorado Thank you!!! Definitely gonna try this modification🫡
@bwashington488 hit me up if you ever have any other questions!
Did it really help? I have a 3060 ti same Pc but recently i get up to 80 Degrees while heavy gaming which wasnt before. I cleaned everything from the inside and even the graphics card but it didnt fix anything
It doesn't help a lot. This case is not designed for a lot of air flow but I will say you can fit a 90mm fan instead of the 80mm I tested. This short was made because people asked how to install a fan on the side so I just wanted to show that you could to help push some extra air. May help to adjust your fan speeds.
Do you have a video upgrading the ssd on one of these? Which size m.2 ssd do I need
In order to clone a drive, you need an nvme enclosure or a pc that has two nvme slots. There are free cloning programs online like easeus or manage engine that will allow you to transfer your data from one drive to the other. Hope this helps
Don’t they come with fan splitters? I’m planning on buying today
Mine didn't. What version are you planning to buy?
@@bradfordskeldorado I decided to go with a Ak400 deepcool hopefully it fits
What ram are you using in this build? I got a victus and seen a lot of people saying you need A-tech?
amzn.to/3UA8iRR
This is a set from crucial that will maintain thr 3200mhz speed. I have it and tested it out and it works great!
@bradfordskeldorado thanks for the speedy reply, looking to upgrade and this really helps
@alexyoung1084 if you have any other questions, let me know. This is a cool PC and I have a full video on swapping it to a full size case too! Thanks for watching
@bradfordskeldorado perfect, thank you! Would you be able to post the link for it please? I got a pretty solid idea how to, but it's just optimising the components without needing to upgrade the cpu or motherboard
Fan upside down or not (airflow from outside to inside the case or from inside to outside?
I have it set up so it pulls cool air from the side panel and through the parts and out the back of the computer.
Do you think two of those fans would fit next to each
I think one in the side and one in the back would work best!
Would 2 fans work, power supply wise? & would 2 fans fit on that cage?
Two fans wouldn't be an issue for the power supply but I don't know of there would be enough room. You could however, change the back fan and possibly have better airflow vs the stock fan
@@bradfordskeldorado Thanks man! I appreciate the tip & the speedy reply!
@@bradfordskeldorado im definitely gonna try this!!
Feel free to reach out if you ever need anything!
what size is back exhaust fan for victus 15l
90mm for the rear fan
Another day, is the original power supply sufficient? I wanted to set it to 600 W but couldn’t find a suitable one
The 350W is great for the rtx 4060 that uses 110W of power. For $299 this gpu is a very good match for the ryzen 5 5600g.
@@bradfordskeldorado Yen has 6600xt and 5600g In principle, everything is fine, but the video card is very hot...
@user-vz4se9di7u the 6600XT is a beast of a gpu and this little pc case doesn't offer a lot of cooling. You could add a fan to the side like this video and I would also change the one in the rear too to a better fan like this noctua.
Hello, I also have a Victus and I would like to ask if I install this Noctua ventilator, will I also have to set it in the program or will there be no need? The size of this ventilator is 80mm or 92mm
You don't have to set it. The fan header will control the speed based on the temps. Very easy install!
@@bradfordskeldorado Thx
@@AgroManiacy anytime!
@@bradfordskeldorado Sorry, I have one more question, what is the length of the cable/splitter for ventilators.
They are a bit long. Approximately 12". I get packs of them from Amazon for very cheap.
Does it have to be a 4 pin fan or can I do a 3 pin also what’s the difference?
You can use either on these!
Quick question but What type of ram sticks did you add? because I wanna add the same rgb ram to my Hp victus
So unfortunately I made a mistake and this ram will reduce the speed down to 2333mhz. I will post a link to the ram that crucial sells that works at 3200mhz and I have tested to verify!
amzn.to/4f2Ftpe
If you want ram that can run 3200mhz it has to be cl22
Ngl i think i fried my board d1 i dont get video through multiple gpus and swapped ram 2 times i had to take the parts that came with and order a new mb and case
What’s a good ARGB fan for both fans?
The scythe one has good reviews it’s a 92 mm fan and can fit both places side and back
I'm not sure of a fan that has rgb without a controller. The scythe fan doesn't have a controller bit also the motherboard doesn't have a rgb hubs.
Hello, what is the reference of the fan you put?
Is the back fan of the case also 80mm? :)
I believe it is an 80mm fan also but I can check to make sure. I just added the one fan to the outside panel so it would pull air in but you could always add the one to the rear too!
Friend, could you send me the link to compare it. Do you know if Amazon sells a power function to change it. Costa Rican soybeans
You're looking for a power supply to upgrade it?
@@bradfordskeldorado Yes, my power source is 310.
@rotzelmartinez7953 looks like this is an upgrade to 400w. Research looks like it's compatible with the hp victus from HPs website.
S-Union Upgraded 942332-001 400W Power Supply Compatible with HP 280 288 285 480 600 680 800 G3 G4 Power Supply PA-3401-1HA L04618-400 942332-001 L04618-800 PA-3401-2HA PSU Power Supply a.co/d/f7eyPVc
Please show switching the case
I wouldn't recommend switching cases unless you're going to change everything except the cpu. The motherboard is case specific, the power supply is proprietary so its only used on this pc and other hp pcs. If you have one of these pcs, you could use the cpu, gpu, ram and cpu cooler but that's about it. It would cost approximately $300-$350 to buy the rest to set these parts up in a different case.
@@bradfordskeldorado Wise words!
Light upgrades GPU/CPU/RAM/SSD are possible. If you want to swap cases etc this PC is not the right one for you.
I have a video of switching the case and confirm that it quickly becomes an $800 pc with an RX6400 lmao. Once you add a gpu, you are $1000+ and should have bought a prebuilt with a 4060 for $899. Thansk for commenting!
does it make sense to install a cooling tower?
I've got a video of installing a cpu cooler but it's hard to find due to the mounting hardware. The motherboard has threaded mounts in it so you have to find a cooler with hardware that installs from the front. It helps a little but really not worth as much as adding fans to the case
How much it made decrease temperature in case?
It didn't affect the cpu temp much which I didn't expect it to but the gpu would average about 3-4* cooler. This is with the 1660 super that I have installed now. The RX6400 that came with it ran 78-82* during tests so I'm sure it would help that little gpu out a lot more. It comes with a stock rear fan and in the small case I just wanted to show that you can add fans if you wanted. Thanks for the question!
Would the Asus Tuf Gaming TF120 work if I want to have some rgb fans for both fans if so would they connect the same way?
120 mm fans won't fit. The biggest fans you can use it a 90mm. The fan header is only 3 pin so it will provide power but they won't have controllable.
@@bradfordskeldorado reply I thought someone commented that they were able to put 120mm fan?
What screwdriver is that cuz the ones I’m using not working I’m trying to add an graphics card
The case I recommend a flat head and if you want to change the cpu cooler, I believe it was a torx or a star bit. The gpu should just be removing the rear screw and the little door opens and allows you to remove the gpu.
Sorry also and another question I also have the victus and do you known if a rx 6800xt graphics card will fit inside of the victus?
The three fan cards won't fit just because the case is smaller than a typical pc case.
Ok thank you so much Ima just get a 4060
So the things your using to unscrew the case and add the new fan is the torx or star bit?
what kinda graphic card is that
This was a 2060 from the full video where I just showed that you could upgrade the gpu.
hey im thinking of doing this to my pavillion gaming pc as it has similar build to a victus and was wondering if adding a additional intake fan makes a huge difference in cooling performance
It's not a huge performance change but it definitely allows for better flow. I did this because people we curious to see if I could add a fan but it's not going to drastically change your temps. It may bring them down 5 to 10 degrees but that's just due to allowing more airflow through the available areas. I hope this helps!
@@bradfordskeldorado ok thank you for ur response I’ll definitely add a 80 or 92mm fan to the side of my pc very soon then
@@bradfordskeldorado hey what would u recommend between a 80mm fan or a 92mm fan from noctua?
@omelette9529 I would do the 92 is it will fit. I haven't ever owned a pavilion but if you can measure and check to see if it would fit then I would go with the 92mm!
is the pc quiet?
It's very quite!
Link plz
Noctua NF-R8 redux-1800 PWM, High Performance Cooling Fan, 4-Pin, 1800 RPM (80mm, Grey) a.co/d/9mY2xt2
what size is the exhaust fan does anyone know?
The rear fan mount is 92mm. The side fan mount supports up to 92mm. The OEM cooler is 80mm fans.
@@CargoPantsLuvr thx so much that really helps
What type of spliter is that?
Fan Splitter, 3 Pack 4 Pin / 3 Pin PWM Fan Splitter Cable 2 Way Sleeved Braided Extension Power Cable 1 to 2 Converter for PC Matherboard, Desktop Computer CPU Fan 10.6 inches a.co/d/0YawAiY
This is a 3 pack that I got on Amazon for $8!
@@bradfordskeldorado thank you!
Anytime!
@@bradfordskeldorado was it a 1 for 3
Or a 1 for 2 splitter? thanks.
Heyy man help PLEASE ! Whats the voltage and sizes on the fans ? I am trying to replace the stock fans my gou runs super hot
This is a 12v fan that is 80mm in size.
The gpu in this pc will run a little hotter just due to the small fan on the gpu itself and the lack of air flow in the pc case itself.
Noctua NF-R8 redux-1800 PWM, High Performance Cooling Fan, 4-Pin, 1800 RPM (80mm, Grey) a.co/d/ihG7il0
@@bradfordskeldorado thank you so much so 12v 80 mm should fit just fine
@PeterParkerDropsAcid yes sir! Hit me up if you have any other questions!
what wattage is the psu?
300W 80+ gold
Don't buy prebuild from HP ...
For the parts you get in this pc, it's not a bad deal. Compared to an i5 2500 with a 650ti 1gb gpu for the same price from Amazon, it does very well. It is limited for upgrades but for $500... it's well worth it
Would you also be able to fit a 92mm fan on the side panel instead of a 80mm?
I believe there is enough room to fit a 92mm on the side. I just didn't measure before I ordered and did this the first time
@@lordgnk8695 92mm does not fit if your video card is too long or wide. I have XFX
RX6600XT Swift 210 and the 92mm does not fit. I have installed a 80mm instead.
@@samirsali I'm aware, I'm not exactly new to modifying the HP Victus platform. I just had never tried a 92mm before.
@@bradfordskeldorado I can confirm there is space for a 92mm fan. If you're able to find it again, which fan splitter did you use?
@lordgnk8695 below is one i have and there is also a 3 fan splitter. If you want that just search "4 pin fan splitter" and there should be a few options! Thanks for the info on the measurement.
Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches a.co/d/bKC1htU