I might be in love with you because how did I not figure that i could've use the clone stamp tool to remove the harsh linesss. I'm shedding tears of joy. Thank you so much.
Thanks for upping the resolution! I like to use 300dpi. When making pattern seamless, try "inverting" to check for seam lines. The "emboss" filter can add depth to the gold layer: it does look a bit too strong: until you rasterize the layer, then it looks more natural, in a rough way.
Hi Kathy, these are great tips! Thank you so much for the ideas. Embossing does look really nice, also inner shadow makes the gold look like it’s in the grooves of the marble which also looks great. There are so many options to make this your own, this is just a starting point. I love rough textures so I will have to try the embossing method as well.
Hi I recommend using the spot healing brush tool for making the pattern seamless. You do much less work then when using the clone tool. The clone tool tends to be a bad choice when you have a pattern that has very subtle gradients that can't be easily connected with the clone tool as it won't usually match the areas your trying to clone tool. With the spot healing brush you just brush the same area (make sure its on content aware) and you get the same colors from that area. The clone tool tends to cause issues when you use the marble pattern as an actual pattern in Photoshop as sometimes the area your cloning from doesn't connect well to the area your cloning to breaking the seamless pattern.
Vigilence Thanks for the comment, great info. This sounds like a better option for metallics as well, I’ll have to give it a try. I’ve been using the patch tool to help with variations in brightness and vibrance. What do you think about the spot healing brush for drastic variations in lighting on the textures?
@@PrettyWebzMedia Your welcome! You sometimes have to switch between content-aware and proximity match when using the spot healing but content-aware should be the first choice.
I actually managed to replicate your steps here almost exactly, but in GIMP! I posted the results as a short and am surprised at how easy this was to accomplish in either program. Thank you so much!! 😊
Thought this was too good to be true, but just tested it out on a document sized 2048 pixels square, and it worked! Genius! Thank you for sharing that!
At about 7:19, for the step where you merge the layers to create a new layer while also keeping the old layers: Everyone knows that Command is basically equivalent to the Windows key on a PC, but fewer know that the Alt key corresponds to Option on a Mac. So for Windows you need to hold down ctrl-alt-windows then press "e". AFAIK this four-fingered keystroke is the only way to do it; when I tried just holding down Alt and using the menu to merge, everything was disabled.
... no. Command is equivalent to Control. Not Windows key. The normal shortcut to merge selected layers into a new layer is Ctrl+Alt+E, or on apple's junk OS, Shift+Option+Command+E. You don't need to hold down the Windows key for ANYTHING in Photoshop.
Thanks for the video and your time. How can i creat higher sized pattern or how can i apply the patter on higher sized project? for example 6000X4500 px
You can start with that size for your pattern or you can create a seamless pattern with the offset filter and fix the seams with the patch or clone stamp tool. I recommend you just make it bigger. Creating a smaller pattern will affect how it looks in your final design as well unless you blow it up it will be much smaller, which defeats the purpose.
Great tutorial! But it doesn't work with bigger size documents - I mean clouds (first step) look bad, the whole pattern is much smaller. Can I adjust the size of clouds? I want to create a big size of the project but with marble like in your tutorial.
When you make your color selections you need to work with the range scale. If the selection is too this I, lower the range. You can also make the selection then contract is by as many pixels as you need.
@@PrettyWebzMedia Can you make something like this ibb.co/T4XhSHm ibb.co/gDrLRC7 for me please. Show it in video. I do in solidworsk that is software to making a model but work with textures is new for me and in that software is few textures so im presured to make it myself. Thas´s it the problem :D Sorry for me english.
You can make the marble black with the "invert" adjustment layer then add the gold after. In the select tool, the same as before but select the highlights and add the gold to that.
Thanks for the vid! When I use gradient map, it is a linear application across the whole canvas, instead of only the specific colors to the dark and light areas of the marble lines? Do you know what I missed out?
You may be choosing colors that are too dark. Try keeping the veins dark (left stop) and the surface (right stop) a very light shade of the color you want. Let me know if this works.
@@PrettyWebzMedia Oh I just realise is because I selected Gradient instead of Gradient map! Thank you for your fast reply! Great tutorials you have made!
I might be in love with you because how did I not figure that i could've use the clone stamp tool to remove the harsh linesss. I'm shedding tears of joy. Thank you so much.
Thank you, I’m glad this helped!
Thanks for upping the resolution! I like to use 300dpi. When making pattern seamless, try "inverting" to check for seam lines. The "emboss" filter can add depth to the gold layer: it does look a bit too strong: until you rasterize the layer, then it looks more natural, in a rough way.
Hi Kathy, these are great tips! Thank you so much for the ideas. Embossing does look really nice, also inner shadow makes the gold look like it’s in the grooves of the marble which also looks great. There are so many options to make this your own, this is just a starting point. I love rough textures so I will have to try the embossing method as well.
Hi I recommend using the spot healing brush tool for making the pattern seamless. You do much less work then when using the clone tool. The clone tool tends to be a bad choice when you have a pattern that has very subtle gradients that can't be easily connected with the clone tool as it won't usually match the areas your trying to clone tool. With the spot healing brush you just brush the same area (make sure its on content aware) and you get the same colors from that area.
The clone tool tends to cause issues when you use the marble pattern as an actual pattern in Photoshop as sometimes the area your cloning from doesn't connect well to the area your cloning to breaking the seamless pattern.
Vigilence Thanks for the comment, great info. This sounds like a better option for metallics as well, I’ll have to give it a try. I’ve been using the patch tool to help with variations in brightness and vibrance. What do you think about the spot healing brush for drastic variations in lighting on the textures?
@@PrettyWebzMedia I have used it for this purpose with good results but sometimes you have to keep trying as the results can get blurry.
Good to know, thanks!
@@PrettyWebzMedia Your welcome! You sometimes have to switch between content-aware and proximity match when using the spot healing but content-aware should be the first choice.
I actually managed to replicate your steps here almost exactly, but in GIMP! I posted the results as a short and am surprised at how easy this was to accomplish in either program. Thank you so much!! 😊
Fantastic! I’m sure a lot of Gimp users will thank you 😊
Girl, you’re amazing 🤩
Thank you 😊
Thanks for sharing! God bless you!!! 🎉
This was really, really, super-duper cool, THANK YOU! This helps me A LOT with making 3D marble textures!👏💕
Thanks! I'm glad to hear it helped
thank you, that little glow make more elegant
Thank you, the details always make it better 😊
If the dimensions of the Render Clouds is a power of 2, eg 1024, the tile repeats seamlessly skipping a whole stage from this tutorial.
Thought this was too good to be true, but just tested it out on a document sized 2048 pixels square, and it worked! Genius! Thank you for sharing that!
awesome tutorial I was looking a round for a brush that creates marble hihihi. Thanks Indeed you saved me!!!
Thanks for your tutorials!
You’re welcome ☺️
Its so helpful . Thanks
Muhteşemsin teşekkürler 👏
THANK YOU!!!!
wow it's so helpful
At about 7:19, for the step where you merge the layers to create a new layer while also keeping the old layers: Everyone knows that Command is basically equivalent to the Windows key on a PC, but fewer know that the Alt key corresponds to Option on a Mac. So for Windows you need to hold down ctrl-alt-windows then press "e". AFAIK this four-fingered keystroke is the only way to do it; when I tried just holding down Alt and using the menu to merge, everything was disabled.
... no. Command is equivalent to Control. Not Windows key. The normal shortcut to merge selected layers into a new layer is Ctrl+Alt+E, or on apple's junk OS, Shift+Option+Command+E. You don't need to hold down the Windows key for ANYTHING in Photoshop.
Thanks so much. You rock!
Thank you!
This is amazing thank you
Glad you like it!
Its amazinb
PERFECT
Thank you!
Thanks for the video and your time. How can i creat higher sized pattern or how can i apply the patter on higher sized project? for example 6000X4500 px
You can start with that size for your pattern or you can create a seamless pattern with the offset filter and fix the seams with the patch or clone stamp tool. I recommend you just make it bigger. Creating a smaller pattern will affect how it looks in your final design as well unless you blow it up it will be much smaller, which defeats the purpose.
Great tutorial! But it doesn't work with bigger size documents - I mean clouds (first step) look bad, the whole pattern is much smaller. Can I adjust the size of clouds? I want to create a big size of the project but with marble like in your tutorial.
You have to scale it up after rendering the clouds at a small size. Increase canvas size then increase the cloud layers.
Nice
Thank u 4 ur videos they are alway useful ..about marble I tried it but it seemed to me the gold veining is very thick How to make it thin?
When you make your color selections you need to work with the range scale. If the selection is too this I, lower the range. You can also make the selection then contract is by as many pixels as you need.
Love this! I’m just having a bit of trouble with the pattern. When I try to place it, it just doesn’t show it
Check the blend mode, are you using black and white or other colors?
You just make the easy things very difficult
Wooww amazing can you share how make another marble ??
Sure, another method for creating marble or another style?
@@PrettyWebzMedia thanks for your feedback. Yess, I think both if possible to add to our experience.
I clicked the link to make the gold pattern, but it took me to a list of videos. I'm not sure which video to watch.
7:20 no entiendo ?
The clone stamp is giving me dark lines when using it. Please help
Perfect
Thank you!
@@PrettyWebzMedia Can you make something like this
ibb.co/T4XhSHm
ibb.co/gDrLRC7
for me please. Show it in video. I do in solidworsk that is software to making a model but work with textures is new for me and in that software is few textures so im presured to make it myself. Thas´s it the problem :D Sorry for me english.
Can this be made in adobe illustrator?
Can you do the gold inlay but with the background black? Instead of the white? Like inverting it without the gold inverting?
You can make the marble black with the "invert" adjustment layer then add the gold after. In the select tool, the same as before but select the highlights and add the gold to that.
Thanks for the vid! When I use gradient map, it is a linear application across the whole canvas, instead of only the specific colors to the dark and light areas of the marble lines? Do you know what I missed out?
You may be choosing colors that are too dark. Try keeping the veins dark (left stop) and the surface (right stop) a very light shade of the color you want. Let me know if this works.
@@PrettyWebzMedia Oh I just realise is because I selected Gradient instead of Gradient map! Thank you for your fast reply! Great tutorials you have made!
so when I'm clicking shift its not putting them in the group and that's the only issue I am having with finishing this particular project
lol I got I!
@@Kisskye how you did it...?
I have the sa e problem can you help me?
Giulia Morelli yesss oh snap let me see..
I will have to get back to you with this I have to open photoshop
When I used gradient, it does just that, to the color so the top of the canvas is light and the bottom is dark, unlike in your video.
Make sure to check “colorize” in the hue and saturation panel. You can also use a gradient map to get a duo tone.
হেল্পফূলী
How do i save these files? PDF, JPG, Png?
File>>export
CAN YOU BE MY CERAMIC TILE TEACHER