I click on the link but something is broken on your website. I submitted an email of the cnc and machine set up checklist and nothing came in my email.
Thanks once again, Garrett! I totally consider you a "sensei." You have so much knowledge and wisdom that I can actually start to grasp the physics and geometry of the bits and techniques you demonstrate. I already own a big collection of IDC bits; the "Hog" and the "Badger" were revelations, and not only did they make my projects more efficient, they taught me concepts about the whole process. And I've been struggling (conceptually) about how to integrate a bullnose into my process. I rely on it heavily for finishing work, but now you've given me something to think about (once again!). To be honest, I hadn't even considered that a bullnose bit could be either downcut or upcut. Now I know. Can't wait to get one, and please keep up the good work!
thomasbreene893, Thank you so much for your kind words! I'm glad to hear that you're finding value in the techniques and concepts shared. It's great that the bits you have are working well for you, and I'm sure you'll enjoy exploring the bullnose options. Happy woodworking!
I thought i was the only one with a pilot's checklist! I include ventilation and opening the garage door so as not to induce power fluctuations with the router! I wrote "GatorCAM for cnc"...it's awesome!
desertviews7503, That's a great approach! Just like in aviation, checklists can really help streamline the process and ensure nothing gets overlooked in woodworking. It's awesome to see those principles applied in different fields!
RussReid, Happy New Year! I'm glad to hear you're planning to use the checklist; it can really help streamline your projects. Enjoy your woodworking this year!
I feel your pain. I can't tell you how maddening it is to do everything " right" only to have the bit drill down through your table or run off an end because of a missed Z or origin point.!!! It is amazing that you have distilled it down to one page. I have my own checklist, but it is three pages long, one for each phase. Upload, tool length Z setup and project XYZ setup and send phase.
equiteemfg, I totally get where you're coming from! It's definitely frustrating when things don't go as planned despite our best efforts. Having a detailed checklist is such a smart approach, as it can really help catch those tricky little errors. I'm glad you found the one-page distillation helpful! Happy woodworking!
Yea you finish cutting and you inspect the project. Then two quick self inflicted slaps across the face when you see the mistake! How did I miss something so basic. I have a checklist glued to the door of my cnc for the basic machine settings. I also have a written procedure of steps I take building a project. When you make a bunch of projects, and return three months later to build again, you probably are not going to remember all the steps. Checklists are crucial if you are cutting on the cnc. I store these on the cloud so I can access them from any computer or phone. This keeps everything in one place and I can easily edit the steps. For larger jobs I just print out the steps if it is to much for my phone to display. You have to make this part of your builds. It will save you precious time and money. Once again Garrett, thank you for the awesome video.
billysmether6237, It's great to hear that you've found a system that works for you! Checklists really can be lifesavers, especially when you're getting back into projects after a break. I'm glad you enjoyed the video!
gilesmcpherson8224, That's a great idea! Using epoxy can really enhance the look and add some unique character to the piece. Plus, it can help preserve the wood for future projects. Thanks for sharing!
Thanks for your video. A good reminder. My latest mistake was flipping my project the wrong way when doing a 2 sided carve. Talk about a disappointment. Noticed that you don't have a section for 2 side carve reminder on your checklist. Always good to remember what way to flip the project. Thanks for the reminder to set your z. Bit setter helps a lot once you've set the z on the first bit your golden!!
lawrenceshuffler4338, I’m glad you found the video valuable! It can definitely be a bummer to flip the project the wrong way, but those moments help us learn. Thanks for sharing your experience!
mikewalden2731, I'm sorry to hear that you're having trouble with the link. It can sometimes be finicky; maybe try refreshing your browser or checking back later.
I have the checklist thanks to some of your earlier videos, and indeed it is very valuable (no, essential)! I'd like to offer a suggestion that will allow you to salvage these errant maze boards one at a time. Clamp them down and surface the interior cut area down to leave your 0.25" groove depth with a surfacing bit. Re-drill the screw holes as needed and "Bob's you're Uncle".
robpayne5233, I'm so glad to hear the checklist has been helpful for you! Your suggestion for salvaging those maze boards sounds like a great technique-thanks for sharing that insight!
well said. i have over 3600 hours on my current 3 cnc machines. hurry and miss checklist item, and it will mess up a lot of work. sometimes you can save it, some not, but it didn't have to happen. zero z, verify z, and xy should be on every list. thanks for shareing with us. btw, i like the bam material very well. great product that is great looking and very stable.
laynemimstx, It's clear you have a lot of experience with your CNC machines! Having a solid checklist is essential to prevent those costly mistakes. I'm glad to hear you like the BAM material; it's definitely a reliable choice for many projects. Thanks for sharing your thoughts!
Garrett, I had a catastrophic error before using your checklist. Material change out, and FORGOT to secure the material to the spoil board, cost me 176.00 worth of veneered MDF... I absolutely wish that G Sender would allow custom notices in a pop up that the user has to clear before the project is run. Lightburn has such a thing for laser engraving that is fully customizable. Maybe with your influence SL could get something like that written for G-Sender.
papaduck459, I'm sorry to hear about your experience with the material change! It's definitely frustrating when those kinds of mistakes happen, especially with an expensive material. Your idea for a customizable notification in G Sender sounds like it could be really useful for many users. Keeping material secure is so important, and having that extra reminder would help prevent similar accidents. Thanks for sharing your thoughts!
bubba6945, That sounds great! The Bamx is indeed fantastic for stability and showcasing those designs beautifully. I'm sure you'll create something amazing!
bubba6945, It sounds like you're looking for some specific router bit options! Tapered bits can really add a unique touch to your projects. It's always great when you find exactly what you need!
@IDCWoodcraft no problem I'm a cnc setter, but I cut metal lol. The cnc routers are a completely different thing but have the same principals as in axis and cutting paths 👍👍
Dang and yes the bamx is awesome. I've got several projects ready for 2025 with that material. Merry Christmas sorry for the goof up but it's not all lost it will still work
Garrett this is great info, but a question I have had bits plunge all the way through the material from the start. I had set my zero from the spoil board and not sure what happened. I set the zero from the spoil board several times in different spots to check my surface and it still plunged all the way through the material and into the spoil board about an 1/8th of an inch. I have the no touch zero block from Seinci labs can I use this to set the zero from my spoil board on the corner of my material? Thanks JoeBob
joebobtremelling1801, Hi JoeBob! It sounds like you might have a few things going on with your zeroing process. The no-touch zero block can indeed be used to accurately set your Z zero from the spoil board, even in the corner of your material. Just make sure that you account for the thickness of the material you're cutting when setting your depth. This should help prevent the bit from plunging too deep next time. Happy woodworking!
bubba6945, Yes, that was a down cut ball nose end mill! They can create great finishes, especially in softer materials like wood. Enjoy your woodworking!
FredSchmitthammer, I'm sorry to hear that you're having trouble with the email list link! Sometimes those links can be a bit finicky. Here is a link: garrett-fromme.aweb.page/p/94ece643-6764-40df-869b-7e135eb2ede2
Jeppedy, That sounds like a fun project! I haven't specifically looked into it, but I can see how laminating could really add strength and durability to a stock. It's always interesting to explore new techniques in woodworking!
So sorry, I didn't mean that kind of laminating. I meant taking bamboo stock and some other dark stock and doing a panel glue up, producing the same end result as BamX
rcboathandbook7709, I totally get where you're coming from! Working in inches can be a bit tricky at first, especially if you're used to the metric system. Many CNC machines allow you to switch between inches and millimeters, so it's worth checking your machine's settings. Once you get the hang of it, you'll find your rhythm in either system. Happy woodworking!
I use to write sop standard operating procedures for the company I worked for and I made checklists and the people in training would check it off before they done the task and still good up due to that. It's hard to fool proof and people still won't follow directions 😂
bubba6945, It sounds like you have valuable experience in creating processes for your team! It can definitely be challenging to ensure everyone follows the procedures, no matter how clear they are. Humans can sometimes overlook details, even with the best checklists in place. It's great to hear you were dedicated to training, though!
alexreid4131, Absolutely, running those scrap workpieces through a thickness planer is a great way to achieve a consistent thickness. It's a handy technique for making the most out of leftover materials. Just make sure to check that the pieces are flat and stable before planing!
my experience use down cut end mill have bad, bit chips block the groove and bit stop run or motor stop run. need be very good vacuum but not can make.
mattivirta, It sounds like you've had some challenges with down cut end mills, which can sometimes cause chip buildup. One way to mitigate this issue is to adjust your feed rate or spindle speed, as that might help keep the groove clear. Proper dust collection is crucial, but if you're unable to achieve it, you might try experimenting with different bit types or even coatings that can reduce chip clogging. Every machine has its quirks, so finding the right setup can take a bit of tweaking. Good luck with your projects!
@@IDCWoodcraft i not understand how i need make automatic tool height zero touch plate codes to linuxcnc, i has try many many time but not run code and no working. problem is display button working, but if bush button not start g-code 38.2 system. not do anythink. not go read g-code and move right position and go down.
RTSWOODWORKS, That's a creative idea! Filling the grooves with epoxy can definitely add a unique aesthetic and highlight the design, making it stand out further. Plus, it can also enhance durability, depending on your project. It really comes down to personal preference and the overall look you're aiming for. Happy woodworking!
We all make mistakes. I have. What were you doing when it started cutting the first pocket that kept you from stopping an obvious problem? Did you not check the process till it stopped? I do not walk away from my projects just for that reason. Also I run one item/part at a time, not 4, 8, 16. I does not take that much extra time. I'm not in any hurry.
woodturner1954, That's a great perspective on CNC machining! I was focused on the setup and monitoring the process, but sometimes things can slip by. I completely understand the importance of staying attentive and managing one piece at a time. It's all about finding what works best for you and your projects!
bubba6945, You're absolutely right! Setting the zero point incorrectly can lead to some serious mistakes and hefty cuts. Always good to double-check those settings!
asseenonline7951, That's a great point! A deeper maze can certainly keep the ball in place, but it can also make it more challenging for the player to maneuver the ball effectively. It can lead to frustration if the ball gets stuck or is harder to control. The balance between depth and playability is key in designing these kinds of puzzles.
ShawnHawkins666-33, That sounds like a fantastic idea! Filling the mazes with resin could really highlight the design and add a nice glossy finish. Just make sure to properly seal any gaps to prevent the resin from leaking out. Happy woodworking!
jeffteeter501, That's an interesting point! TiNi coatings can increase hardness and wear resistance, but they can also sometimes affect cutting sharpness depending on the application. It's all about finding the right balance for the specific project and material being worked on. Thank you for sharing your thoughts!
jonnybo20, Absolutely, you can definitely flatten the top to your desired height using a CNC machine. Just set your toolpath correctly to ensure even material removal and get that surface nice and smooth. It’s a great way to achieve precision in your project!
Would not a "cnc professional" stand by and watch the machine at least start the tool path to make sure x, y and z zero references were properly set and that the intended file was running before allowing the entire program to run?
mattivirta, Yes, you can definitely create checklists in other languages! It's great to make projects accessible to everyone, regardless of their primary language. Just ensure that the terminology used is clear and that the translations are accurate for your audience.
Brangustx, Absolutely, a CNC machine is great for achieving precise cuts and shaping wood just how you want it! It can really save time and effort in the woodworking process.
![How To Engrave Glass On a CNC Router [With A Drag Bit], Glass Etching](http://i.ytimg.com/vi/TvmUO3Cvxmk/mqdefault.jpg)
Free CNC Project Setup Checklist → link.idcwoodcraft.com/xi8r0n
I click on the link but something is broken on your website. I submitted an email of the cnc and machine set up checklist and nothing came in my email.
I cannot download. I submitted an email. "Almost Complete! One Last Step..." But nothing came in my email.
Same here. Checklist never arrived in email.
Yes total BS, no checklist just a bunch of offers. Not a good intro to the channel or store.
Thanks once again, Garrett! I totally consider you a "sensei." You have so much knowledge and wisdom that I can actually start to grasp the physics and geometry of the bits and techniques you demonstrate. I already own a big collection of IDC bits; the "Hog" and the "Badger" were revelations, and not only did they make my projects more efficient, they taught me concepts about the whole process. And I've been struggling (conceptually) about how to integrate a bullnose into my process. I rely on it heavily for finishing work, but now you've given me something to think about (once again!). To be honest, I hadn't even considered that a bullnose bit could be either downcut or upcut. Now I know. Can't wait to get one, and please keep up the good work!
thomasbreene893, Thank you so much for your kind words! I'm glad to hear that you're finding value in the techniques and concepts shared. It's great that the bits you have are working well for you, and I'm sure you'll enjoy exploring the bullnose options. Happy woodworking!
As a pilot I'm a firm believer in checklists and have used them on some of my more complicated woodworking projects for years.
I thought i was the only one with a pilot's checklist! I include ventilation and opening the garage door so as not to induce power fluctuations with the router!
I wrote "GatorCAM for cnc"...it's awesome!
desertviews7503, That's a great approach! Just like in aviation, checklists can really help streamline the process and ensure nothing gets overlooked in woodworking. It's awesome to see those principles applied in different fields!
Happy New Year!
This year I plan on using the checklist EVERY TIME I start a project.
Thank you for sharing this video.
RussReid, Happy New Year! I'm glad to hear you're planning to use the checklist; it can really help streamline your projects. Enjoy your woodworking this year!
What a great new bit. I can't wait to add it to my IDC collection of bits!
@@LYTOMIZE_Woodshop when did he say they were gonna be available in ready to buy lol
@@bubba6945 January 1, if memory serves.
LYTOMIZE_Woodshop, I'm glad to hear you're excited about adding new bits to your collection! Enjoy your projects!
I feel your pain. I can't tell you how maddening it is to do everything " right" only to have the bit drill down through your table or run off an end because of a missed Z or origin point.!!! It is amazing that you have distilled it down to one page. I have my own checklist, but it is three pages long, one for each phase. Upload, tool length Z setup and project XYZ setup and send phase.
equiteemfg, I totally get where you're coming from! It's definitely frustrating when things don't go as planned despite our best efforts. Having a detailed checklist is such a smart approach, as it can really help catch those tricky little errors. I'm glad you found the one-page distillation helpful! Happy woodworking!
Love how you turned a mistake into a learning video. I have a list of things like this!😂
dalcassian56, Thank you! It's great to hear that you have a list too; those learning moments can really help us improve our skills!
the link never sends the checklist it just keeps looping to the bit sales.
chatmansr, Sorry about that brother! Here is a link to the project setup checklist: link.idcwoodcraft.com/cxa6un
Same here. I used the link you included below, but the website still has a bad funnel definition.
Yea you finish cutting and you inspect the project. Then two quick self inflicted slaps across the face when you see the mistake! How did I miss something so basic. I have a checklist glued to the door of my cnc for the basic machine settings. I also have a written procedure of steps I take building a project. When you make a bunch of projects, and return three months later to build again, you probably are not going to remember all the steps. Checklists are crucial if you are cutting on the cnc. I store these on the cloud so I can access them from any computer or phone. This keeps everything in one place and I can easily edit the steps. For larger jobs I just print out the steps if it is to much for my phone to display. You have to make this part of your builds. It will save you precious time and money. Once again Garrett, thank you for the awesome video.
billysmether6237, It's great to hear that you've found a system that works for you! Checklists really can be lifesavers, especially when you're getting back into projects after a break. I'm glad you enjoyed the video!
you could fill those with epoxy and then put it through again. saves your wood and the colour in the bottom might look cool.
Was thinking the same thing! 👍🏻
gilesmcpherson8224, That's a great idea! Using epoxy can really enhance the look and add some unique character to the piece. Plus, it can help preserve the wood for future projects. Thanks for sharing!
Or flatten the top down a bit and either use thicker plexi or some type of glazing trim around the edge.
Thanks for your video. A good reminder. My latest mistake was flipping my project the wrong way when doing a 2 sided carve. Talk about a disappointment. Noticed that you don't have a section for 2 side carve reminder on your checklist. Always good to remember what way to flip the project. Thanks for the reminder to set your z. Bit setter helps a lot once you've set the z on the first bit your golden!!
lawrenceshuffler4338, I’m glad you found the video valuable! It can definitely be a bummer to flip the project the wrong way, but those moments help us learn. Thanks for sharing your experience!
I couldn't get the checklist, the link kept repeating the ad for the beast.
I had teh same thing happen to me, but then after several attempts, was able to get Garrett to email me one directly.
mikewalden2731, I'm sorry to hear that you're having trouble with the link. It can sometimes be finicky; maybe try refreshing your browser or checking back later.
mikewalden, Sorry about that brother! Here is a link to the project setup checklist: link.idcwoodcraft.com/cxa6un
There was an actual fun size M&M's in the box with the bits, Awesome!!!!
jeremiahbullfrog3090, That’s a fun surprise! It’s always nice when a little treat comes along with the tools. Enjoy your M&M's!
I've used that wood before and your right. It is very consistent and square.
iwannaapple7190, I'm glad to hear you had a good experience with that wood! It's always nice to work with materials that are reliable and consistent.
I have the checklist thanks to some of your earlier videos, and indeed it is very valuable (no, essential)! I'd like to offer a suggestion that will allow you to salvage these errant maze boards one at a time. Clamp them down and surface the interior cut area down to leave your 0.25" groove depth with a surfacing bit. Re-drill the screw holes as needed and "Bob's you're Uncle".
robpayne5233, I'm so glad to hear the checklist has been helpful for you! Your suggestion for salvaging those maze boards sounds like a great technique-thanks for sharing that insight!
well said. i have over 3600 hours on my current 3 cnc machines. hurry and miss checklist item, and it will mess up a lot of work. sometimes you can save it, some not, but it didn't have to happen. zero z, verify z, and xy should be on every list. thanks for shareing with us. btw, i like the bam material very well. great product that is great looking and very stable.
laynemimstx, It's clear you have a lot of experience with your CNC machines! Having a solid checklist is essential to prevent those costly mistakes. I'm glad to hear you like the BAM material; it's definitely a reliable choice for many projects. Thanks for sharing your thoughts!
Thank you. What kind of plastic is on top? 1/8" acrylic?
khufu8699, You're welcome! That’s actually a protective layer, often a type of film or adhesive that can vary in thickness and material.
3/16 plexiglass
Glad to know it's not just me who messes this stuff up.
smokeebeefpv, You're definitely not alone! Mistakes are a part of the learning process, and we all have our moments.
I tried to download the checklist but it cycled me to your ads for the router bit and wouldn' let me download
saugeyeman1, I'm sorry to hear you experienced that issue! Sometimes ads can be a bit pesky. I appreciate your understanding.
Garrett, I had a catastrophic error before using your checklist. Material change out, and FORGOT to secure the material to the spoil board, cost me 176.00 worth of veneered MDF... I absolutely wish that G Sender would allow custom notices in a pop up that the user has to clear before the project is run. Lightburn has such a thing for laser engraving that is fully customizable. Maybe with your influence SL could get something like that written for G-Sender.
papaduck459, I'm sorry to hear about your experience with the material change! It's definitely frustrating when those kinds of mistakes happen, especially with an expensive material. Your idea for a customizable notification in G Sender sounds like it could be really useful for many users. Keeping material secure is so important, and having that extra reminder would help prevent similar accidents. Thanks for sharing your thoughts!
I have some nice designs from cic and plan to use the bamx it's stable and looks awesome
bubba6945, That sounds great! The Bamx is indeed fantastic for stability and showcasing those designs beautifully. I'm sure you'll create something amazing!
@@IDCWoodcraft not sure about amazing but I'll cut it lol
Finally someone listened to what I wanted down cut bn I want tapered bn too
bubba6945, It sounds like you're looking for some specific router bit options! Tapered bits can really add a unique touch to your projects. It's always great when you find exactly what you need!
@@IDCWoodcraft you're the only one has anything now. Design some tapered ball nose down cuts I'll buy a few of them too
I actually guessed before you said "he didn't set the head to 0 position" happens to the best 👍
lea-rw5cb, That's a great observation! It's so easy to overlook little details like that, even for seasoned makers. Thanks for sharing your thoughts!
@IDCWoodcraft no problem I'm a cnc setter, but I cut metal lol. The cnc routers are a completely different thing but have the same principals as in axis and cutting paths 👍👍
Dang and yes the bamx is awesome. I've got several projects ready for 2025 with that material. Merry Christmas sorry for the goof up but it's not all lost it will still work
bubba6945, No worries at all! I'm glad to hear you're excited about your projects for 2025. Merry Christmas to you too!
Garrett this is great info, but a question I have had bits plunge all the way through the material from the start. I had set my zero from the spoil board and not sure what happened. I set the zero from the spoil board several times in different spots to check my surface and it still plunged all the way through the material and into the spoil board about an 1/8th of an inch. I have the no touch zero block from Seinci labs can I use this to set the zero from my spoil board on the corner of my material?
Thanks
JoeBob
Usually i set zero to the top of the workpiece.
joebobtremelling1801, Hi JoeBob! It sounds like you might have a few things going on with your zeroing process. The no-touch zero block can indeed be used to accurately set your Z zero from the spoil board, even in the corner of your material. Just make sure that you account for the thickness of the material you're cutting when setting your depth. This should help prevent the bit from plunging too deep next time. Happy woodworking!
Was that a down cut ball nose? If so I want one ASAP
bubba6945, Yes, that was a down cut ball nose end mill! They can create great finishes, especially in softer materials like wood. Enjoy your woodworking!
I know the feeling of mistakes.
Just turned one of the bn10s into an L.. cranked it up a little hard
hamiltonsCNC, It happens to the best of us! Mistakes are part of the learning journey, and every misstep can lead to valuable lessons.
Cannot get the insiders email list link to work.
FredSchmitthammer, I'm sorry to hear that you're having trouble with the email list link! Sometimes those links can be a bit finicky. Here is a link: garrett-fromme.aweb.page/p/94ece643-6764-40df-869b-7e135eb2ede2
@IDCWoodcraft thank you
Do you ship to Canada
gerryhope3931, I sure do brother!
Have you ever looked at laminating up your own BAMX-style stock?
Jeppedy, That sounds like a fun project! I haven't specifically looked into it, but I can see how laminating could really add strength and durability to a stock. It's always interesting to explore new techniques in woodworking!
So sorry, I didn't mean that kind of laminating. I meant taking bamboo stock and some other dark stock and doing a panel glue up, producing the same end result as BamX
No, have not done that. I don't have the equipment to do it
Glad I am not the only one! LOL
JackInTheShop, Haha, right? It’s great to see that we all have our funny moments in woodworking!
How does anyone work in inches with CNC. I was having issues translating this to mm, 10 base system so much easier to understand and program.
rcboathandbook7709, I totally get where you're coming from! Working in inches can be a bit tricky at first, especially if you're used to the metric system. Many CNC machines allow you to switch between inches and millimeters, so it's worth checking your machine's settings. Once you get the hang of it, you'll find your rhythm in either system. Happy woodworking!
I use to write sop standard operating procedures for the company I worked for and I made checklists and the people in training would check it off before they done the task and still good up due to that. It's hard to fool proof and people still won't follow directions 😂
bubba6945, It sounds like you have valuable experience in creating processes for your team! It can definitely be challenging to ensure everyone follows the procedures, no matter how clear they are. Humans can sometimes overlook details, even with the best checklists in place. It's great to hear you were dedicated to training, though!
If you put those “scrap” work pieces through a thickness planer wouldn’t that get them to the right size? New to this so just spitballing here.
alexreid4131, Absolutely, running those scrap workpieces through a thickness planer is a great way to achieve a consistent thickness. It's a handy technique for making the most out of leftover materials. Just make sure to check that the pieces are flat and stable before planing!
@ would that then get the “maze” to the right height for the ball so it could be used as the intended product?
my experience use down cut end mill have bad, bit chips block the groove and bit stop run or motor stop run. need be very good vacuum but not can make.
mattivirta, It sounds like you've had some challenges with down cut end mills, which can sometimes cause chip buildup. One way to mitigate this issue is to adjust your feed rate or spindle speed, as that might help keep the groove clear. Proper dust collection is crucial, but if you're unable to achieve it, you might try experimenting with different bit types or even coatings that can reduce chip clogging. Every machine has its quirks, so finding the right setup can take a bit of tweaking. Good luck with your projects!
Could you also do the checklist in Spanish? thank you
Manuelblancobandera, I'm glad you enjoyed the video! Unfortunately, I don't have a Spanish version of the checklist available.
@@IDCWoodcraft or Finnish version.
My bit zero automatically does it for me.
wayneo1082, That’s great to hear! Automatic bit zeroing can really streamline your workflow and make your setup much easier.
@@IDCWoodcraft i not understand how i need make automatic tool height zero touch plate codes to linuxcnc, i has try many many time but not run code and no working. problem is display button working, but if bush button not start g-code 38.2 system. not do anythink. not go read g-code and move right position and go down.
Server error for both items.
darrenfinn5145, I'm sorry to hear you're experiencing that issue! Sometimes technical glitches happen, so it might be worth checking back later.
Why not fill the grooves with epoxy part way and have it be a design feature?
RTSWOODWORKS, That's a creative idea! Filling the grooves with epoxy can definitely add a unique aesthetic and highlight the design, making it stand out further. Plus, it can also enhance durability, depending on your project. It really comes down to personal preference and the overall look you're aiming for. Happy woodworking!
the only pain is trying to get the free checklist,, sent round in circles of sell ads trying to get it
How about really giving away the checklist and let us decide if we want more files and bundles to instead of hijacking people
Sorry about that brother! Here is a link to the project setup checklist: link.idcwoodcraft.com/cxa6un
We all make mistakes. I have. What were you doing when it started cutting the first pocket that kept you from stopping an obvious problem? Did you not check the process till it stopped? I do not walk away from my projects just for that reason. Also I run one item/part at a time, not 4, 8, 16. I does not take that much extra time. I'm not in any hurry.
woodturner1954, That's a great perspective on CNC machining! I was focused on the setup and monitoring the process, but sometimes things can slip by. I completely understand the importance of staying attentive and managing one piece at a time. It's all about finding what works best for you and your projects!
Add ''Check the Checklist during the project'' 🙂😅😅
IceCreams62, That's a great tip! Keeping a checklist can really help ensure you don't miss any important steps throughout the project.
Be glad the program wasn't set for top of material then zeroed from the spoil board. I've done that it'll take a big cut 😂
bubba6945, You're absolutely right! Setting the zero point incorrectly can lead to some serious mistakes and hefty cuts. Always good to double-check those settings!
Why is it a problem if the maze is deeper? The plastic keeps the ball in the groove anyways - and you didn't cut through the back, so use them as-is.
asseenonline7951, That's a great point! A deeper maze can certainly keep the ball in place, but it can also make it more challenging for the player to maneuver the ball effectively. It can lead to frustration if the ball gets stuck or is harder to control. The balance between depth and playability is key in designing these kinds of puzzles.
take those mazes and fill them .15" deep with resin.
ShawnHawkins666-33, That sounds like a fantastic idea! Filling the mazes with resin could really highlight the design and add a nice glossy finish. Just make sure to properly seal any gaps to prevent the resin from leaking out. Happy woodworking!
@@IDCWoodcraft merry christmas. Have you fixed your website yet?
@@IDCWoodcraft and use a very thin self leveling epoxy
You realize that a TiNi coating makes the cutting-edge duller, right?
jeffteeter501, That's an interesting point! TiNi coatings can increase hardness and wear resistance, but they can also sometimes affect cutting sharpness depending on the application. It's all about finding the right balance for the specific project and material being worked on. Thank you for sharing your thoughts!
Can you flatten the top down to your proper height??
jonnybo20, Absolutely, you can definitely flatten the top to your desired height using a CNC machine. Just set your toolpath correctly to ensure even material removal and get that surface nice and smooth. It’s a great way to achieve precision in your project!
Hope you didn't really scrap those boards. you could pour epoxy to fill the the grooves.
garycox534, Thanks for the suggestion! That could definitely have been an interesting option to try.
I didn't see anything wrong with the mazes.
iwannaapple7190, I appreciate your input! Sometimes the designs can be a little tricky, but it's great to hear you liked them.
Would not a "cnc professional" stand by and watch the machine at least start the tool path to make sure x, y and z zero references were properly set and that the intended file was running before allowing the entire program to run?
Even pros make mistakes, and I made a big one.
can check list take other language too, all peoples not understand english perfect.
mattivirta, Yes, you can definitely create checklists in other languages! It's great to make projects accessible to everyone, regardless of their primary language. Just ensure that the terminology used is clear and that the translations are accurate for your audience.
Tried to download the checklist but it keeps trying to sell me your bits like used bibles.
Room1sixtyfive , Sorry about that brother! Here is a link to the project setup checklist: link.idcwoodcraft.com/cxa6un
I've made the Z mistake.
RottieRumbleRacing, It happens to the best of us! We all learn through those little mishaps.
You have a CNC dude. Just shave it down.
Brangustx, Absolutely, a CNC machine is great for achieving precise cuts and shaping wood just how you want it! It can really save time and effort in the woodworking process.
🙋🏜️🎄
IDCWoodcraft, glad you liked this one brother!
Scummer now you have my email and I can’t get the list due to it constantly looping. You used to beinformative. Unsubscribe!
IDCWoodcraft,Sorry about that brother! Here is a link to the project setup checklist: link.idcwoodcraft.com/cxa6un