There's a lot more to pwm than just noise. Pwm, or pulse width modulation, is the speed that the fets switch at. 1kh=1000 cycles per second. The higher the pwm frequency setting, the faster the fets are switching. This results in smoother throttle modulation and as you have shown, lower RF noise. The trade-off is that the esc is working at a higher duty cycle and will tend to run warmer. Not a huge deal on high turn motors, but it could throw the esc into thermal protection with a lower turn motor, 3s, a heavy rig, etc.
Im really impressed with the 1080, I’ve used an xl5 hv for a year on my trx4 kit and now I’ve put a 1080 in my new sport kit. The amount of adjustments it has compared to the xl5 hv is unparalleled. It is by far the better of the two.
What adjustments does the xl5hv have? Besides sport, race, training, trail and crawl. I have one, just got it, I don't do much except drive it around, so I don't need much. But it would be nice to know what all it could do
All good comments. I'm learning. A little late to the crawling scene. I never thought going slow was fun or climbing rocks or dirt hills. I am having so much fun with my used axial wraith.
Great video man. I've been using 1080 for a while on my SCX10. You should really try to lower item 10 - Drag Brake Rate to Level 3 and see how it slowly decelarates on the descents. Much needed if you have front heavy truck on the steep downhill. Prevents tipping over due to abruptly stopping on the spot.
I only use max brake settings for videos, like you I like my trucks to roll a bit and all I do is steer it when going down things. It seems many scalers want full stop on any incline so that’s why I max things like this out. The Axe is also nice and it will roll exactly the speed you want with the way it works.
Damn that’s quite!! Nice.. you’re videos are the best one utube cuz u get right to the point and u don’t waste time wit useless info!! That y I watch all ur videos!👍
Good show as always. Well, I guess I gotta go out and trade the old Quick run 1060 as a go to, in for an upgrade QR 1080 next build. Besides, I run HobbyWing in everything from Skywalker esc's in my drones, to SeaKing in my boat's, Ez/Quick run in my racers, and even an Axe FOC in my crawler. But buying FOC combos at 200$ a pop, for every crawler build is just pricey. So, an upgrade to the 10BL80, SOUNDS like a fantastic idea. Thanks brother, God knows my ears have become sensitive to the high pitch motor squeal, especially after running those remarkable and outstanding FOC Axe combos. Anyhow, where else can I get a real, informative, unbiased, review, and tech tip?. Than on Exo Caged Rc. 👍 Outstanding.
Thank you, I try my best to simply show what these products are and give an opinion. Yeah I have a feeling most all my crawlers will get the AXE system, also stay tuned I have something in the works that should get one of their new 3300kv Axe systems
I have that ESC on both my TRX4s with HH torque master 27T 550s. Unbeatable setup. I'm pretty sure the 1080 can be programmed to 7.4v lead out, but it would be really nice to see a video on hooking up the Hobbywing UBEC for TRX4s when you dont want to swap out all your other electronics with a high volt steering servo. I also added Surpass Hobbys fans to my ESC and motor.
I actually have a few bec’s laying around I can do that with. I’d have to use my red/white trx bronco as it still has all the stock servos in it. I’ll look it over and if I can make an easy to follow video on it I will.
Hello mate, I’m treating myself to the trx4 sport kit for Christmas. I was also going to get the hobbywing 1080 esc when reading the manual I though it said the motor turn limit was 16t but you have fitted a 12t, is it still running ok?
just wondering how to wire up your light module, and steering servo using this ESC? Is there something else you will have to buy to make this work? Really enjoy your channel!
Great video as always Joe! Does the PWM Frequency affect how anything runs? I always left mine on stock setting for that due to not knowing exactly what it was.
That’s what this video shows, esc’s are either on or off on the motor output, the hum is the frequency of the pwm you are hearing, by turning it up it gets out of our hearing range and it sounds quieter to us.
Thanks for the great video! So the default setting on the Hobbywing is 8K for PWM frequency. Essentially the higher the frequency, the smoother the power delivery, but the higher heat/stress on the ESC. You also get the secondary benefit of a no noise if you choose the next step up at 16K. Did you check the temps between 8K vs 16K? Though it's a Hobbywing, I'm sure it run well regardless.
Yes, I am doing that. If you are running a traxxas bec for your traxxas servo you'll have to remove it. This would have saved me 30 minutes on the install. Truck is dead silent running inside. No Brainerd to buy and install. I'm new at this hobby. Notice how 90 percent of trx4s on RUclips have this esc
Hey man I just got the hobbywing 1080 with a Tekin 45t and I'm just wondering if you could possibly put up a video of your ESC settings . I mainly do your type of style crawling and I know your video will be legit
How do you like the trailmaster motor? Never run anything from hh I just use rc4wd 35 and 45 turn motors because they're super cheap to replace. Would a budget hh motor make much of a difference?
I really like the Holmes motors. At $15-$20 they are all I’ll ever use. He also makes some high end brushed motors that are insanely good. No kidding. Are they better than RC4wd? Not sure but I have yet to kill one so I’ll stay with what works for me.
Got a 1080 as a Christmas gift, looking for a motor to pair it with for my scx10 ii. Do mostly crawling with it since I have basher and racing buggies. What's your suggestion?? Any help is greatly appreciated. Keep up the amazing job, daily video watcher..
Hi, quick question. If I were to go the budget brushless route, is the Hobbywing Quicrun 10BL120 120a esc good for crawling duties? I'm looking for a nice budget sensored system as I am trying to stay away from brushed because it's going into a trail scale rig.... need the longer run times. I'm also looking to pair it with a 17.5t g2 sensored motor from hobbywing. My major concern is going down a rock, having it hold with drag brake, then if I give it a little throttle input, I don't want the rig to roll super quick off the rock so wondering if that Hobbywing Quicrun 120a esc can do the job. Thanks!
Hobbywing fusion 2 I 1 1800 kv super great combo under 2 bills in Canada and it has some of best brakes out there simple install comes with card to set it up just right
In basic terms it’s how fast the esc pulses are sent to the motor also known as frequency. Lower frequencies we can hear, higher frequencies we cannot.
Well at 1k pwm esc runs cool, motor is loud. 16k pwm esc runs hotter motor is quiet. Depends on what you’re doing as to what’s needed. Slow geared low crawling gets 16k. 3S brushed motor in a Wraith would probably overheat so a lower pwm would be better.
It seemed like maybe it was a tiny bit smoother on startup but that could have just been me imagining it. So I wouldn't say its very noticeable at all.
Would I be able to run this on a 20t motor? I burnt up my stock ESC in my scx10 2 when I put the 20t motor in it and I just ordered this ESC and want to know if I need to go back to my stock motor before burning up this ESC and wasting $43 😂
@@davidspinney7344 I do love it, I've had it for about 3 days now and it barley even gets warm even after running for 3 hours and on a 3s lipo! Definitely a great deal for less than $45!
Installed the 1080 and all seems ok except the diff lockers and the high low gear selector have stopped working ? I have a Bluetooth Traxxas module installed in the TQi controller ? Any help Exo or RC fans out there ?
Exocaged RC , checked all connections and everything seems to be plugged in as it was , I think the TQi needs to be re bound with the Receiver, I control two TRX4 with the TQi and somehow the software has become confused , I’m going to blank the profiles on the Bluetooth link software and try re binding , thanks for the help Exo , looking forward to the next video 👍🏻😃
I just found that the three Smaller servos are blown ! Could it have been setting the BEC up on 7.4v instead of 6v that could of blown the three small servos ?! Plugged a new smaller 2065 servo in all three channels and the servo works on all channels 🤷🏻♂️ I tried 7.4v on the BEC to give the 20kg servo some extra power ,! Could this blow all the other servos connected to the receiver box ?! WARNING TO OTHER TRX4 owners out there 😔
Message to all TRX4 owners running the stock 2065 servos ! Don’t set your 1080 hobbywing at 7.4v , hope this doesn’t happen to anyone else 😔 thanks for the help Exo , expensive lesson 😫
This esc is good but look at a servo that runs straight from the battery with a JST, those are what I'm moving to on everything and the 46kg is only $50 shipped off ebay. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FJX-CLS-12V7346-46KG-Metal-Steering-Digital-12V-HV-Coreless-Servo-for-RC-Car-ND%2F163570405375%3Fepid%3D26030002628%26hash%3Ditem26158e4fff%3Ag%3APKcAAOSw-1Zcd7qk&campid=5338273090&toolid=20008
@@ExocagedRC 46kg is a load of power, I'd love to see a test of it (edit, found your test, did you get a chance to try it on 3s?) I run a 25kg servo and castle bec in my trx-4 and that made a huge difference over stock.
The 1080 Bec is surprisingly robust. I think the 3a rating is a constant rating, not a peak. I've ran a Savox 1230sg(6.0v) and a Spektrum A6300(7.4v) with a spektrum radio(notorious for being power sensitive) and never suffered a brown out. The only reason I went to an external Bec was because I wanted to supply my A6300 with 8.4v.
Yes there is a way, I just installed a 1080 that’s why I was watching this vid. Not sure what rig you have I have a trx4 & I’m researching how to set up the factory lights I know it can be done I remember watching a vid on it but it was a while ago.
Has anybody else had trouble programming the 1080? I press the set button and power at same time it starts up I keep in in nutral then press black button again and it stops? I have a gt3b radio please help
I don't get why people run bl motors/mod brushed set ups in a trail truck/crawler?! I use 27-55 turn brushed motors that are what $12, then I use this 1080 in all my trail trucks & my cr01 too. I run nimh for convenience & have plenty of power & run time. Silly & a waste of money, being an old school racer who rebuilt motors & ran nicd's I love this. Pleanty of linear power & torque from brushed motors, & they last since there hardly turning, which is my point.
I'm actually getting back into the brushed stuff, but one big reason for brushless is way way more torque, more efficient, less maintenance, more wheel speed and in many ways its just a better power system as it makes more power easier. With my heavy vehicles they are brushless but my lighter ones are running brushed perfectly. Check out Holmes Hobbies for the absolute best in motors.
@@ExocagedRC Yes I agree lipo & bl are more efficient, but I can't see spending the money for them or Holmes motors for playing around. I use bl set ups but only in my race cars & trucks. If I couldn't get great torque & power from a $12 gool 55T, 45T, 35T, & 27T motor (with gear reduction) I might think about bl. Holmes hobbies is a waste a money. Back in the day it paid to have hand wound motors for racing, machine wound do just fine. Enjoy this cool hobby while we have decent weather, happy trails! Winter comes & it's all about indoor racing!
The pitch changed to a point that it got so high, the human ear couldn't pick it up anymore. Bet it would drive a dog nuts though, lol. Great comparison though.
I have a trx 4 high trail edition. Its so awesome. Ive had to change both servos.. steering is a metal gear survo. And main survo is a hobbywing 1080.. i want to take it off crawler mode.. i dont have a programming card.. is there a way that i could change it to the double click to reverse mode? I liked how i had to be the brake.. not the hobbywing brake.
Why is the pwm tunable? Will it be a different "best" silent setting for different motors? Not always the highest pwm frequency? I also used xl 5 on my crawlers. Work fine bit this noise irritates me. Will go find me a hobby wing 1080
There's a lot more to pwm than just noise. Pwm, or pulse width modulation, is the speed that the fets switch at. 1kh=1000 cycles per second. The higher the pwm frequency setting, the faster the fets are switching. This results in smoother throttle modulation and as you have shown, lower RF noise. The trade-off is that the esc is working at a higher duty cycle and will tend to run warmer. Not a huge deal on high turn motors, but it could throw the esc into thermal protection with a lower turn motor, 3s, a heavy rig, etc.
Thank you for the technical info on that, I like learning stuff.
What frequency should it be safe to run it on then and would a 35t motor be safe?
@@lowrider181 i run a 35t tamiya cr tuned in my gmade R1 and it is absolutely fine. Most of the time i drive with 2s. No temp issues so far.
thank you!
Cool
Im really impressed with the 1080, I’ve used an xl5 hv for a year on my trx4 kit and now I’ve put a 1080 in my new sport kit. The amount of adjustments it has compared to the xl5 hv is unparalleled. It is by far the better of the two.
What adjustments does the xl5hv have? Besides sport, race, training, trail and crawl. I have one, just got it, I don't do much except drive it around, so I don't need much. But it would be nice to know what all it could do
Mac P no more than that, it is not programmable besides the 5 driving modes
@@dangavin ok, thanks
All good comments. I'm learning. A little late to the crawling scene. I never thought going slow was fun or climbing rocks or dirt hills. I am having so much fun with my used axial wraith.
Yeah man. Crawling is the only part of the hobby where .2mph can be too fast. LoL.
Best video on this I've seen mine has been playing up and after watching I know how to fix it thank you keep up the great work
The 1080 is a great ESC. I have one installed in my CMX. I have a 1060 installed in my Gen 8.
Great video man. I've been using 1080 for a while on my SCX10. You should really try to lower item 10 - Drag Brake Rate to Level 3 and see how it slowly decelarates on the descents. Much needed if you have front heavy truck on the steep downhill. Prevents tipping over due to abruptly stopping on the spot.
I only use max brake settings for videos, like you I like my trucks to roll a bit and all I do is steer it when going down things. It seems many scalers want full stop on any incline so that’s why I max things like this out. The Axe is also nice and it will roll exactly the speed you want with the way it works.
That's the setting I use, works great hey, stops a lot of tipping A over T ;)
As soon as you switched to 16k, my dog crawled up the wall, drag brake and all, amazing lol
Damn that’s quite!! Nice.. you’re videos are the best one utube cuz u get right to the point and u don’t waste time wit useless info!! That y I watch all ur videos!👍
Absolutely love the 1080 esc. Didn’t know you could change the pwm. Not that mine needs it. It has been quiet since day one. Very good to know though.
Great demonstration of the PWM settings.
That’s what I’m running too there amazing ESCs!
Good show as always. Well, I guess I gotta go out and trade the old Quick run 1060 as a go to, in for an upgrade QR 1080 next build. Besides, I run HobbyWing in everything from Skywalker esc's in my drones, to SeaKing in my boat's, Ez/Quick run in my racers, and even an Axe FOC in my crawler. But buying FOC combos at 200$ a pop, for every crawler build is just pricey. So, an upgrade to the 10BL80, SOUNDS like a fantastic idea. Thanks brother, God knows my ears have become sensitive to the high pitch motor squeal, especially after running those remarkable and outstanding FOC Axe combos. Anyhow, where else can I get a real, informative, unbiased, review, and tech tip?. Than on Exo Caged Rc. 👍 Outstanding.
Thank you, I try my best to simply show what these products are and give an opinion. Yeah I have a feeling most all my crawlers will get the AXE system, also stay tuned I have something in the works that should get one of their new 3300kv Axe systems
Thanks for the video great info keep up the great work and I enjoy referring to your videos for info...
Very nice comparison. With this ESC and a cheap Chinese 5-Slot-Motor my Crawler has basically become silent when crawling.
Thanks just the video i needed to set up my Enduro Kit. Much appreciated!
Solid review man! Keep up the killer work! I just ordered a 1080 for my WPL
The high PWM runs smooth than the lower, easily, you choose your option in every case or situation.
I have that ESC on both my TRX4s with HH torque master 27T 550s. Unbeatable setup. I'm pretty sure the 1080 can be programmed to 7.4v lead out, but it would be really nice to see a video on hooking up the Hobbywing UBEC for TRX4s when you dont want to swap out all your other electronics with a high volt steering servo.
I also added Surpass Hobbys fans to my ESC and motor.
I actually have a few bec’s laying around I can do that with. I’d have to use my red/white trx bronco as it still has all the stock servos in it. I’ll look it over and if I can make an easy to follow video on it I will.
👍🏻 always learn something new watching your videos. 👍🏻
Me too
Exocaged RC 🤪
@@RedRoxRc 🤪🤣🤣🤣
Merci beaucoup pour votre vidéo. Très bien!!!😎
You rock dude. Thanks for all your cool videos.
Thank you for watching
Great video brother, i have one of these in my Trx4 and its great. Was thinking about adding a fan to mine. Nice job
If you run it maxed out at 16khz yeah I can see a fan helping it out
I just installed a 1080 in my GEN8, I wondered what that PWM setting would effect. Now I know.👍🏼
Keep in mind that higher pwm frequency will cause the esc to run a bit warmer, however it's probably a non-issue on crawlers.
Did u have any issues putting this in your gen 8
Nathen Cosgrove no e at all. I run the 1080 in all of my crawlers.
Dezfan I’m having issues programming it
Great video I’m definitely goin to upgrade!!! ( because of this video)
Hello mate, I’m treating myself to the trx4 sport kit for Christmas. I was also going to get the hobbywing 1080 esc when reading the manual I though it said the motor turn limit was 16t but you have fitted a 12t, is it still running ok?
yeah, its been good, those turn limits are for warranty purpose. So long as you gear it correctly and drive right, it holds up great
just wondering how to wire up your light module, and steering servo using this ESC? Is there something else you will have to buy to make this work? Really enjoy your channel!
jburgess5 all you’ll need is a Jst output off the battery plug. On the stock XL5 esc it has it and it has battery voltage out of it.
*sets 16k, dogs for miles around start howling* 😂
What did you find out on the freewheeling mode. What does it really do
Basically it gives way more control on descents, really nice feature
Nice and useful video, like always!
Thanks for sharing!
Great video excellent fix those are great for sure
Great video as always Joe! Does the PWM Frequency affect how anything runs? I always left mine on stock setting for that due to not knowing exactly what it was.
That’s what this video shows, esc’s are either on or off on the motor output, the hum is the frequency of the pwm you are hearing, by turning it up it gets out of our hearing range and it sounds quieter to us.
Thanks for the reply. Just didn't know if it was just to get rid of the sound or if it actually does something to the drivability.
It can add a little heat to the ESC. But on crawlers...shouldn't have anything to worry about. I run my 1080 on the 8K setting.
Per a recent video from John Holmes, the highest frequency does affect the slow speed startup of his crawlmaster sport negatively
Thanks for the great video! So the default setting on the Hobbywing is 8K for PWM frequency. Essentially the higher the frequency, the smoother the power delivery, but the higher heat/stress on the ESC. You also get the secondary benefit of a no noise if you choose the next step up at 16K. Did you check the temps between 8K vs 16K? Though it's a Hobbywing, I'm sure it run well regardless.
I haven’t noticed any difference in temps on the crawlers. If I were using it for hills and stuff I’d probably see a difference
@@ExocagedRC Nice, so you run it exclusively at 16K?
gpage yep I sure do
Hello Excellent Vid , Can I use the 1080 with the stock motor. ?
What is the difference between 1 to 16K other than the sound?
Thx
Yes, I am doing that. If you are running a traxxas bec for your traxxas servo you'll have to remove it. This would have saved me 30 minutes on the install. Truck is dead silent running inside. No Brainerd to buy and install. I'm new at this hobby. Notice how 90 percent of trx4s on RUclips have this esc
Thank you 🙏
Hey man I just got the hobbywing 1080 with a Tekin 45t and I'm just wondering if you could possibly put up a video of your ESC settings . I mainly do your type of style crawling and I know your video will be legit
I’ve done several videos on settings of the 1080. I’ll see if I can find one.
What do you recommend for the fayee Hemet esc , I recently got the 370 motor unknown turn upgrade
What tires are you running on that truck? Love the videos keep up the great work!
👊😎👍🇺🇸
Those are stock defender tires with a cut tread, Crawler Innovations LIL Nova Foams and are mounted on some cheap alloy
Would a 1080 make my stock traxxas titan motor do better?
It should give it more control and you'll be ready for a new Holmes motor when the stock one blows up.
How do you like the trailmaster motor? Never run anything from hh I just use rc4wd 35 and 45 turn motors because they're super cheap to replace. Would a budget hh motor make much of a difference?
I really like the Holmes motors. At $15-$20 they are all I’ll ever use. He also makes some high end brushed motors that are insanely good. No kidding. Are they better than RC4wd? Not sure but I have yet to kill one so I’ll stay with what works for me.
Hi mate! If I want a 2 in 1 car like crawling and some high speed car, 1060 will be suit to me?
well maybe, you can move the jumpers for crawling or racing.
Got a 1080 as a Christmas gift, looking for a motor to pair it with for my scx10 ii. Do mostly crawling with it since I have basher and racing buggies. What's your suggestion?? Any help is greatly appreciated. Keep up the amazing job, daily video watcher..
Rick Boyster thank you for watching. Yes I would recommend a Holmes Hobby Crawlmaster Sport 540 16t for that 10ii
@@ExocagedRC thanks very much for the reply, I will get that motor on it's way.
WoW! That’s cool!
Great video. Thank you.
Hi, quick question. If I were to go the budget brushless route, is the Hobbywing Quicrun 10BL120 120a esc good for crawling duties? I'm looking for a nice budget sensored system as I am trying to stay away from brushed because it's going into a trail scale rig.... need the longer run times. I'm also looking to pair it with a 17.5t g2 sensored motor from hobbywing.
My major concern is going down a rock, having it hold with drag brake, then if I give it a little throttle input, I don't want the rig to roll super quick off the rock so wondering if that Hobbywing Quicrun 120a esc can do the job. Thanks!
If you're just trailing how much run time do you need? A 5000ish mah battery will last for hours with a stock setup.
Hobbywing fusion 2 I 1 1800 kv super great combo under 2 bills in Canada and it has some of best brakes out there simple install comes with card to set it up just right
Does the truck come to a dead stop when descending on a hill with throttle in neutral?
Sheldon Hildebrand depends on the vehicle weight and gearing but it gets close
If you go too high on the pwm you’ll over heat the esc without a fan on it put a fan if running high pwm
Who else runs their drag brake rate at max? I have mine at lowest setting or else my truck does forward flips when I let off gas
I rarely ever run full drag brake however for video it helps to see just how strong it can be and how well it can hold.
Exocaged RC ah I see
Thanks For Sharing !!!
can a sx107 micro servo handle 7.4 volts is for the dig on capra
I don't think its rated for that
May i know what does the pwm resolution does? 1k is for what? 16k is for what actually?
In basic terms it’s how fast the esc pulses are sent to the motor also known as frequency. Lower frequencies we can hear, higher frequencies we cannot.
Exocaged RC and how does it effects the control/ drivability of the rc? Why not just select the highest frequency available?
Well at 1k pwm esc runs cool, motor is loud. 16k pwm esc runs hotter motor is quiet. Depends on what you’re doing as to what’s needed. Slow geared low crawling gets 16k. 3S brushed motor in a Wraith would probably overheat so a lower pwm would be better.
Thanks so much :)
does the PWM setting effect driving at all?
It seemed like maybe it was a tiny bit smoother on startup but that could have just been me imagining it. So I wouldn't say its very noticeable at all.
@@ExocagedRCthat is very nice to know!! kill the noise and make the ride smoother, sweet deals isn't it!!?
Would I be able to run this on a 20t motor? I burnt up my stock ESC in my scx10 2 when I put the 20t motor in it and I just ordered this ESC and want to know if I need to go back to my stock motor before burning up this ESC and wasting $43 😂
Trent Hutson the 1080 should be able to run that without issue. Great esc.
@@ExocagedRC awesome, thank you!
@@trenthutson7409 you will love it!
@@davidspinney7344 I do love it, I've had it for about 3 days now and it barley even gets warm even after running for 3 hours and on a 3s lipo! Definitely a great deal for less than $45!
1060/1080 esc it’s Noise ?
Great video,
Good info brother
How you doing brother,, I send Sean and email don't know if he received it ,,, Does the veterans event still happening at the end of this month
Installed the 1080 and all seems ok except the diff lockers and the high low gear selector have stopped working ? I have a Bluetooth Traxxas module installed in the TQi controller ? Any help Exo or RC fans out there ?
The 1080 shouldn’t affect any of that make sure you didn’t unplug those by mistake
Exocaged RC , checked all connections and everything seems to be plugged in as it was , I think the TQi needs to be re bound with the Receiver, I control two TRX4 with the TQi and somehow the software has become confused , I’m going to blank the profiles on the Bluetooth link software and try re binding , thanks for the help Exo , looking forward to the next video 👍🏻😃
I just found that the three Smaller servos are blown ! Could it have been setting the BEC up on 7.4v instead of 6v that could of blown the three small servos ?! Plugged a new smaller 2065 servo in all three channels and the servo works on all channels 🤷🏻♂️ I tried 7.4v on the BEC to give the 20kg servo some extra power ,! Could this blow all the other servos connected to the receiver box ?! WARNING TO OTHER TRX4 owners out there 😔
g9000 oh man. Yes. They are 6v max. Hate to hear that man.
Message to all TRX4 owners running the stock 2065 servos ! Don’t set your 1080 hobbywing at 7.4v , hope this doesn’t happen to anyone else 😔 thanks for the help Exo , expensive lesson 😫
Great video. Can u use this 1080 on a 380 37t dynomite motor on my cr12 tioga.
should be fine with that
do I need a brushlessmotor for dragbrake?
No. You may have to adjust the esc if there is no drag brake.
@@ExocagedRC I adjusted it to 100% but my original traxxas motor do not brakes. it does, but not strong enough
Awesome, just installed mine last night and has a couple questions on some of the more strange settings, thanks brother.
Hopefully I helped you out with this
I think I'm going to switch to this system. I'm sick of brown outs. On my gen 7 pro. This motor esc and a bec and a stronger cervo, eventually.
This esc is good but look at a servo that runs straight from the battery with a JST, those are what I'm moving to on everything and the 46kg is only $50 shipped off ebay. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FJX-CLS-12V7346-46KG-Metal-Steering-Digital-12V-HV-Coreless-Servo-for-RC-Car-ND%2F163570405375%3Fepid%3D26030002628%26hash%3Ditem26158e4fff%3Ag%3APKcAAOSw-1Zcd7qk&campid=5338273090&toolid=20008
@@ExocagedRC 46kg is a load of power, I'd love to see a test of it (edit, found your test, did you get a chance to try it on 3s?) I run a 25kg servo and castle bec in my trx-4 and that made a huge difference over stock.
Thanks for the advice, it's much appreciated!
I have the new 12v one I need to put on the tester. I do know it’s got plenty enough power and it’s quiet.
The 1080 Bec is surprisingly robust. I think the 3a rating is a constant rating, not a peak. I've ran a Savox 1230sg(6.0v) and a Spektrum A6300(7.4v) with a spektrum radio(notorious for being power sensitive) and never suffered a brown out. The only reason I went to an external Bec was because I wanted to supply my A6300 with 8.4v.
What's Freewheeling?
Wow 16k is so high pitch, barely heard it👍🏿
There weren’t any dogs around so I have no idea how they will act.
@@ExocagedRC lol, true
@@ExocagedRC I crawl at a dog park and they don't react to my truck (that has a 1080) any different from other trucks.
@@InvisiMan2006 thats great info, thank you
Is the stock esc capable with 12turn motor on 3s please!
Yes.
So I cant run lights with the 1080 esc right?
Yes there is a way, I just installed a 1080 that’s why I was watching this vid. Not sure what rig you have I have a trx4 & I’m researching how to set up the factory lights I know it can be done I remember watching a vid on it but it was a while ago.
but now there is a new problem on 8K and 16K my dog howls the whole time im driving my truck! i cant win
Has anybody else had trouble programming the 1080? I press the set button and power at same time it starts up I keep in in nutral then press black button again and it stops? I have a gt3b radio please help
Hmmm. Do you have ch2 reversed on the transmitter?
Exocaged RC yes
would these settings apply to capra also
Yep
I don't get why people run bl motors/mod brushed set ups in a trail truck/crawler?! I use 27-55 turn brushed motors that are what $12, then I use this 1080 in all my trail trucks & my cr01 too. I run nimh for convenience & have plenty of power & run time. Silly & a waste of money, being an old school racer who rebuilt motors & ran nicd's I love this. Pleanty of linear power & torque from brushed motors, & they last since there hardly turning, which is my point.
I'm actually getting back into the brushed stuff, but one big reason for brushless is way way more torque, more efficient, less maintenance, more wheel speed and in many ways its just a better power system as it makes more power easier. With my heavy vehicles they are brushless but my lighter ones are running brushed perfectly. Check out Holmes Hobbies for the absolute best in motors.
@@ExocagedRC Yes I agree lipo & bl are more efficient, but I can't see spending the money for them or Holmes motors for playing around. I use bl set ups but only in my race cars & trucks. If I couldn't get great torque & power from a $12 gool 55T, 45T, 35T, & 27T motor (with gear reduction) I might think about bl. Holmes hobbies is a waste a money. Back in the day it paid to have hand wound motors for racing, machine wound do just fine. Enjoy this cool hobby while we have decent weather, happy trails! Winter comes & it's all about indoor racing!
Craig Stern Holmes budget stuff is only $15-$20 and they run really well.
Craig Stern Holmes budget stuff is only $15-$20 and they run really well.
what is that high pitch noise
The the PWM noise from the esc, this noise is a frequency, the frequency is audible and that’s what the high pitch noise is.
Idk y but I laugh every time u say take a look. Idk y lmao. Your videos are awesome tho dude
Meanwhile all the dogs in the neighborhood are pissed off.
LoL maybe.
The pitch changed to a point that it got so high, the human ear couldn't pick it up anymore. Bet it would drive a dog nuts though, lol. Great comparison though.
I have a trx 4 high trail edition. Its so awesome. Ive had to change both servos.. steering is a metal gear survo. And main survo is a hobbywing 1080.. i want to take it off crawler mode.. i dont have a programming card.. is there a way that i could change it to the double click to reverse mode? I liked how i had to be the brake.. not the hobbywing brake.
So maybe only my dog can hear it past 8k?
I hate esc sound but there's not much I can do
Do you know what is the freewheeling capability.
AkosiMRswabe yeah that’s a bit odd. Turn that on and it will control descents extremely well.
That sounds much better. Everyone knows Traxxas sucks!
1:18 WHAT
Get a microphone
Why is the pwm tunable? Will it be a different "best" silent setting for different motors? Not always the highest pwm frequency? I also used xl 5 on my crawlers. Work fine bit this noise irritates me. Will go find me a hobby wing 1080