It's not very often you see a good Pontiac let alone one dam near pulling 1,000 HP You got me anxious to pull my 70 Trans Am out have no idea what is involved in pulling 1,000 I pull in the 700's and thought anything above 800 HP was a pipe dream.. I'd love to see a video showing parts and assembly specs if it's not Top Secret Rock On Keep Pontiac as the Street Judge and Jury 👍😉😅😎
@@JohnHawkinsLV it’s pretty straightforward. 14.5:1, 380+ wideports, ported Victor, 1250 Holley, 50mm cam with 4/7 swap and in the 280/290 @ .050 range...I almost have it installed. Got to a point on it and then all my other chores came due...lol hope to make my first race in it at the end of May...it’s a sanctioned street race near where I live...
Thank you Drew... we enjoy it. In September we are taking it to a super cool all Pontiac Show and Race at Ark City Kansas...would be a good time to check it out and get some footage!
I always wanted a GTO when I was younger but I think 2000 was finally the year I got my first one. I bought the one this engine is for in 2006...love these old A-Bodies! I have had MANY 77-78 Trans Ams...
@GilliamFarms So a 10 sec 1/4 approx . Maybe another carburetor . Take a PEEP on RUclips of Gary Williams Carburetors in the USA 🇺🇸 He's an old time ⏲️ Drag Racer 🏁 Pretty sure he could give u some more Keep up the Gr8 👍 work down the drag strip . Enjoy the Farm 🚜 Clips God bless Robert Australia 🇦🇺
A car that runs 5.7X to the 1/8th is quite a bit quicker than a 10 second pass...you can’t just 1/2 it and think you know how fast it will be in the 1/4. FWIW it runs low 9.0 at a bit over 150 so I am still car limited with no parachute (parachute rule is 150 mph)...I appreciate the responses about the carburetor but in all actuality I am already where I want to be...
Northeast Oklahoma, sometimes Tulsa, Centerville Arkansas, maybe Mokan. I was at Norwalk in 2021 with it in slightly less HP mode...videos of a couple passes in my channel. Thank you!
Just sent his name thru 4U . God Bless & give him a call 📞 He makes this Billet Carburettor that's between a 4150 & 4500 that's called the X Carburettor . Awesome Piece of Bling 😅
Great video, how do you like the Stefs oil pan. is it good quality and should I use it on my 1970 GTO 400cid. will it hold up to normal street use and not crack?
The Carburettors are built by " Gary Williams Carburetors " He's in2 Big Effort Engines Drag Racing 🏁 Pretty sure he can give U an Xtra 20/40 HP & more TQ . A real icon & gentleman . 👏
What heads are this Beast please , Robert Australia There's this Sensational Carburetor Fella in the USA & I guarantee u guys he could give u another 20/40 hp . He drag car guy . Unfortunately l cant recall his name 4U . I have saved the youtube clip & when l find him l will definitely send u his name at least & possible number. Enjoy ur time drag racing.
They are Edelbrock Wide Ports that have been worked over a few times, dry decked, and milled to 14:1 with flattops. Thank you for the info and yes you can send it to me when you find it!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Heck Ya, Great numbers and the ET at Norwalk is the icing on the cake!
You have a very understanding wife, with a good Job!
I do have that...she bought my helmet and race suit because she wants to keep me around...the rest has been dozer work and brushhogging.
True story. This is all Johnny, but I am still pretty awesome. 😎
I can’t wait to see Judgment Day back on the track with this beast! Pontiac Baby!
Like this my dad raced when I was young on dirt track good luck
Nice one my friend🤝💪👍💯🔥
Thank you! Should be a lot of fun!
max max max pontiac build and power. I'm just hoping to make 575 hp with all iron!
Thank you...I have made 602 with a 455 with iron D-ports before...
Was this on pump gas? Could you please list details of that build? Thanks @@GilliamFarms
Love to see more of these. Who built the engine.
Thank you, Shinook Machine Shop in Tahlequah Oklahoma
It's not very often you see a good Pontiac let alone one dam near pulling 1,000 HP
You got me anxious to pull my 70 Trans Am out have no idea what is involved in pulling 1,000 I pull in the 700's and thought anything above 800 HP was a pipe dream..
I'd love to see a video showing parts and assembly specs if it's not Top Secret
Rock On Keep Pontiac as the Street Judge and Jury 👍😉😅😎
@@JohnHawkinsLV it’s pretty straightforward. 14.5:1, 380+ wideports, ported Victor, 1250 Holley, 50mm cam with 4/7 swap and in the 280/290 @ .050 range...I almost have it installed. Got to a point on it and then all my other chores came due...lol hope to make my first race in it at the end of May...it’s a sanctioned street race near where I live...
Who makes the 535ci block? Butler?
Ill pit crew for ya any time brother! Nice numbers man and what a beautiful car!
Thank you Drew... we enjoy it. In September we are taking it to a super cool all Pontiac Show and Race at Ark City Kansas...would be a good time to check it out and get some footage!
That thing makes good power 👍.
It certainly does!
I use to own a 69 GTO I loved that car then I went to Pontiac Catalina Pontiac use to make great cars
I always wanted a GTO when I was younger but I think 2000 was finally the year I got my first one. I bought the one this engine is for in 2006...love these old A-Bodies! I have had MANY 77-78 Trans Ams...
What about Pontiac Ram Air 5 Heads .. might make a Bit More 😅
I am happy with what I have. Small tire car that runs 5 second 1/8th mile times naturally aspirated…
@GilliamFarms
So a 10 sec 1/4 approx . Maybe another carburetor . Take a PEEP on RUclips of Gary Williams Carburetors in the USA 🇺🇸
He's an old time ⏲️ Drag Racer 🏁
Pretty sure he could give u some more
Keep up the Gr8 👍 work down the drag strip . Enjoy the Farm 🚜 Clips
God bless Robert Australia 🇦🇺
A car that runs 5.7X to the 1/8th is quite a bit quicker than a 10 second pass...you can’t just 1/2 it and think you know how fast it will be in the 1/4. FWIW it runs low 9.0 at a bit over 150 so I am still car limited with no parachute (parachute rule is 150 mph)...I appreciate the responses about the carburetor but in all actuality I am already where I want to be...
What kind and size of headers are you running on that BEAST?
It is a 2” Hooker Super Comp…
Late to the party but what edelbrock heads did you use ? What kind of flow numbers?
Edelbrock Wide Ports, 380ish flow, 14.5:1
Great video. I'd like to see the GTO run. Where u iz cuz?
Northeast Oklahoma, sometimes Tulsa, Centerville Arkansas, maybe Mokan. I was at Norwalk in 2021 with it in slightly less HP mode...videos of a couple passes in my channel. Thank you!
Nice numbers. What's the combination? Heads, flow ect?
535 IAIIA, Wideport Eheads 380+, 14:5-1, very ported Victor, 1250 Dominator, stefs pan, 2” header, Q16... thank you.
@@GilliamFarms Thanks!!! Good luck it should fly!!!!
PONTIAC POWA!!!
Just sent his name thru 4U .
God Bless & give him a call 📞
He makes this Billet Carburettor that's between a 4150 & 4500 that's called the X Carburettor .
Awesome Piece of Bling 😅
Thank you!
Great video, how do you like the Stefs oil pan. is it good quality and should I use it on my 1970 GTO 400cid. will it hold up to normal street use and not crack?
I really like the pan. I would think as long as it’s not smacking the pavement it should work well for street!
The Carburettors are built by " Gary Williams Carburetors "
He's in2 Big Effort Engines Drag Racing 🏁
Pretty sure he can give U an Xtra 20/40 HP & more TQ .
A real icon & gentleman . 👏
Thank you!
Which Pontiac Heads have u on Ur Engine
Edelbrock Wide Ports! Thanks for the watching!
What heads are this Beast please , Robert Australia
There's this Sensational Carburetor Fella in the USA & I guarantee u guys he could give u another 20/40 hp . He drag car guy . Unfortunately l cant recall his name 4U . I have saved the youtube clip & when l find him l will definitely send u his name at least & possible number. Enjoy ur time drag racing.
They are Edelbrock Wide Ports that have been worked over a few times, dry decked, and milled to 14:1 with flattops. Thank you for the info and yes you can send it to me when you find it!