Dear Kausar, I will make a video on this topic. Ap is video me dekh sakty hian but me aik video us pe bana don ga ruclips.net/video/9iCRlupNfmM/видео.html
@@TechnologyExpertAsif thank you very much you provide very good and vary informative information kindly also tell price of tecometer that you same use it and which shop i buy it reflected tape and tecometer.?
Dear idle kam ya zayada nai hota engine stable hota hai ap is ko tight karo engine vibration bhar jay to thora sa loose kar dena jab stable ho gy to wo setting good hai.
2.5 sai 5 turns means? samajh nahe i, full tight k bd half turn kitne bar krain gai... ya esa keh lain full circular moment kitne bar dain gai mixture set k leye.?
Brother, full tight kar ka car 5 half turn, us k bad fine tune karny hai thory se race dy kar yani almost 1200 rpm pe thora tight karna hai jab car rpm drop karna shuro kary to thora sa wapis kar dena hai.
Mean pelhai rpm increase krain gai 1200 k qareab, phr mixture screw tight krtai 5 half turns daina hay, jb car rpm kam krai tu thora sa mixture screw wapis krna hay.?
Please follow the process : You require a tachometer. If you do not have then use your hearing sense most cautiously. 1) Increase idling spreed to 1300 RPM. 2) Clockwise turn the mixture to completely tighten it. 3) Unscrew slowly and continue to unscrew it till maximum RPM is reached. 4) Reset the idling back to 800-1000 RPM where engine is smooth. You reached the optimum point of efficiency & power.
Sir ji, engine change karane ke bad gaadi overheat Ho rahi hai, 3rd and 4th gear me dhakke Mar Rahi hai, kya ye lean mixture hoga? Fan and coolant sahi hai....!
Mai air fuel mixture screws jitna tight krlo ya loose krlo engine mai koi change ni ata. Our sparts plugs kholo to us pr petrol hota hai.. ye kya masla hosakta hai.
Bhai jan ap aik video mehran k rpm ki settings per alag sy bnay, idle mixture screw ko complete open ker k kitni turn close kerna hy to rpm 800 tak set huta hy. Kun ap k pas techometer hy. Jis k pas ni hy uska faida hojyga. Apka shukria.
@@TechnologyExpertAsif bhai us rpm per headlight on kero to battery k voltage 12 volt per ajty hen. Matlab battery charging ruk jati hy. New generator b lgwa liya hy, masla woi hy jo pehly tha. Mechanic ko aik he kam huta hy k race bharha do. Jis sy petrol ki average disturb ho jati hy. Koi hal hy iska ap k pas????
Good, ap ne kuch technical points ka khayal to rakha jaise k engine ka optimum temperature pe hona lazmi hai. Lekin ager her 2 week k baad setting adjust karni pare gi to mixture setting main 1 se 2 month lag jain ge. Koi aur tareeqa hona chaheye.
Mere paas Maruti 800 DX Five Speed 2001 Model hai. Total Running 37000kms. Jab me ise Non AC Drive kr raha hu to kuch problem nahi aari hai, lekin AC me drive krta hu to 4-5 km ke baad iska temprature needle badh jaata hai normal position se, Fan bhi chal rha h, Coolent bhi hai, Oil bhi hai, First time jab aisa hua to reserve tank me coolent boil hone lag gaya tha, aur temprature high pahuch gaya lekin jese hi AC off kiya sab normal ho gaya, Mechanic ko dikhaya to wo bol rhe h ki GASKET ka problem hai, lekin gasket ka issue hota to NON AC bhi to bubbles aane chaiye the, aur coolent me OIL ka koi sign bhi nahi h, smoke bhi normal aara hai, Meri gaadi me shayd thermostat bhi nahi h. kya yeh iska issue ho skata hai? Please help me to find out the issue
1 turn 360 ka hota hai kuch log 180 ka b kehty hian but ap best rpm pe set karo regardless turns, as carburetors differently behave karty hian mixture ko Full close ke taraf ly k jao jahan pe rpm drop start ho jain wahan se about half turn 180 back kar do. Acha result mily ga
Dear No, it will not happen, as with more fuel rpm decrease and with more air rpm increase. Only ideal mixture will give best performance. For reference please see my plug inspection video. ruclips.net/video/IoDiS3Gjqrw/видео.html
Aslam o Alaikum bhai mere pas mehran 2004 model hai car 1st aur 2nd gear mein sahi chalti hai jb hum 3rd aur 4th gear mein jate hain to gari speed nai pakarti plz baatein kia masla hai
bhai jan me ne mehran ka engine bnwaya tha gari silencer se paani maar rhe thee thora thora lekin distributor ki setting ko jb change kiya to ab paani ni maar rhe , distributor cup ki setting se gari paani marna bnd kr deti ha ? aur agr gari paani ni mar rhe silencer se to is se koi frk prta ha , pls is ka jwab de shukriya
Dear Bhatti, Subah ke wakt jab car start karty hain to thory dair tak white dhuwan aur pani chorna chahiaye pher jab garam ho jati hai to band ho jata hai dhuwan aur pani, engine us wakt khulta hia jab silencer me nami any lag gye yani geela geela rehny lagy. 3 chezain buhat important hain 1. Tappet clearance 2. plug and point proper setting 3. timing adjustment in se engine ke life bharty hian aur mehran ka engine 150000 k bad khulta hai. Shell oil (purani car to 20/50 agar new hai to 10/40) use karain.
in cold climate like uttar akhand, kashmir, Shillong, etc, 20-30 or either of these is ideal for fuel economy. In hot climate 20-50 because in hot climate, engine oils tend to become thinner hence less protection for wear and tear
Assalam o alaikum bro mere sath mehran 800cc hy mai ny kuch den pehly os mai petrol ki setting ki hy but ab jab b mai petrol mai kuch 5 ya 6 km jata ho to gari band ho jati hy per cng mai start ho jati hy magar petrol mai start nhi hoti agar kuch help app kary mehrubani hogi app ki thanx.,,
Adnan sahib, filter cover utar ke petrol pe kar ke race bar bar de kar dekho petrol a raha hai k nai. Aur mixture ke screw 4 turn out karny they ap ny kahen tight to nahe kar dia. Tappet clearance and timing ke issue b ho sakta hai aur current chorny ka issue b ho sakta hai.
G bilkul bro fuel nhi ata workshop waly ny kaha unit change karo wo b change kar di fuel pump b change ki aur app ki bath sahi hy qk mai ny new unit dal di jab gari band hoti hy to per unit tak awaz nhi karta per 3 ya 4 ganty bad unit awaz b karta hy aur per gari start b ho jati hy.,
Sir carbourator ka front pa jo screw laga hota he wo fuel mixture hota he ya nahe or kia usa 1.5 turn khlna chahia kio ka kuch vedios me maruti 800 ka yahe wala screw 4 turn khola he or samne carbourator ka jo ak screw hota he wo 1.5 turn khola he full tite kar ka kindly help
Sir buhat achi video , me ne setting ki ha carbeurator ki lekin meri gari me masla usi trah ha , masla ye ha k gari k gear change kr k jab me race deta ho to aik jhatka ata ha , neutral kr k jab race deta ho to 1 sec k liye gari ki race rukti ha phr theek ho jati ha , kiya masla ho skta ha pls rply aur bhai jan apna mobile number b share kr den shukriya
@@TechnologyExpertAsif bhai jan carburetor to i think 9 se 10 months pehly full saaf kraya tha us me mechanic ne aik jet same rehny diya tha aur aik jet shayd 82 ka daala uski waja se jhatka to ni ha kahi ?
@@FarhanKhan-iq6uk usi ny kuch garbar ke hai. carburetor car ka dil hota hai jis tara dil ka valve band hogye to banda nai chalta use tara carburetor ka valve b sensitive hoty hian.
yes, actually no need of tachcho meter. step 1. increase idle speed so that the engine will not stop while adjusting the mixture. 2. tied the mixture until you notice that the engine starts vibrating 3. then loosen the mixture bit by bit the engine will again gain speed in rpm until you find the maximum rpm position, that is the correct mixture position. 4. after that slowly loosen the idle screw till you find the correct idle speed that in the range of 800 to 1000 rpm. after driving about 2 kms you can inspect the spark plug for fuel economy
Dear, I am not motorcycle mistry or motor mechanic, I am engineer and make videos on the basis of study and workshop manuals, mistry can no do so, as they learnt the things from ustad g with ratta how to do without theory. ;)
Very Bad video Why you have change the RPM for adjustment of fuel while you have not consider any RPM while setting the fule to its optimum level You use only theory of turns not RPM Bad information Charts are good
sahi expert hai bhai. ajj tak kisi machenic nei istarah setting nahi ki. agar karachi mei koi aisa machenic hai please share.
اگر ملے تو مجھے بھی بتا نا
اگر ملے تو مجھے بھی بتا نا
السلام علیکم ٹیکو میٹر کا استعمال اور اس کا ریفلکٹر کیسے لگاتے ہیں مہربانی فرما کر اس کے بارے میں بھی بتائیں ۔
Dear Kausar, I will make a video on this topic. Ap is video me dekh sakty hian but me aik video us pe bana don ga
ruclips.net/video/9iCRlupNfmM/видео.html
@@TechnologyExpertAsif thank you very much you provide very good and vary informative information kindly also tell price of tecometer that you same use it and which shop i buy it reflected tape and tecometer.?
@@kausarraza4118 Bhai Daraz online zindabad www.daraz.pk/products/dt-2234c-non-contact-di-tal-lcd-laser-photo-tachometer-mini-rpm-tester-meter-i177570031-s1353650934.html?spm=a2a0e.searchlist.list.62.2ec67aafHdue2N&search=1
Nice information!
آئیڈل سکریو loose کرنے سے آئیڈل کم ہوتا ھے یا زیادہ؟
Dear idle kam ya zayada nai hota engine stable hota hai ap is ko tight karo engine vibration bhar jay to thora sa loose kar dena jab stable ho gy to wo setting good hai.
@@TechnologyExpertAsif Thanks a lot dear...
@@drakhlaqhussain You are welcome
Apka ik chakar 180 degree hai yaa 360 degree hai fuel mixture ka nut
360 but yeh koi rule nahe hai ap ke car jahan pe ideal dy wayan pe set kar lo. For more details watch plug inspection video
Great video, complete and detailed information.
Thanks brother
Good
Thanks
Alto vxr 1000 cc ki b same ha seting ?? or 4 turn 360 k angel se ?? mtlb 360 ka 1 turn x 4 turn ??
Very informative vedio
Thanks a lot
Kia baat Hy. Perfect adjusted. Sir kamal Hy. MashAllah. JazakAllah
Thanks
2.5 sai 5 turns means? samajh nahe i, full tight k bd half turn kitne bar krain gai... ya esa keh lain full circular moment kitne bar dain gai mixture set k leye.?
Brother, full tight kar ka car 5 half turn, us k bad fine tune karny hai thory se race dy kar yani almost 1200 rpm pe thora tight karna hai jab car rpm drop karna shuro kary to thora sa wapis kar dena hai.
Thankx brother 😊
Mean pelhai rpm increase krain gai 1200 k qareab, phr mixture screw tight krtai 5 half turns daina hay, jb car rpm kam krai tu thora sa mixture screw wapis krna hay.?
Phr rpm 800 sai 890 k mid lai kr atai phr mixture full tight krnai k bd 4 time half turns daina hay..
Mare mehran 2004 model hay...
Ma sha Allah nice information
Thanks for liking
ایسی ایر فیول مکسچر سیٹنگ ھم شیراڈ آنڈہ ماڈل پر بھی کر سکتے ھیں ؟
g kar sakty hain
वाह भाई मैंने पूरा यूट्यूब सानिया मुझे ऐसे वीडियो नहीं मिली
👍
Janb. Ap ki wark shop kidar he. Please Bataa dain. Thinx. Mehran ka Kam he
Waah ustaad g v goood ❤
Thanks for the compliment 🙂
Please follow the process :
You require a tachometer.
If you do not have then use your hearing sense most cautiously.
1) Increase idling spreed to 1300 RPM.
2) Clockwise turn the mixture to completely tighten it.
3) Unscrew slowly and continue to unscrew it till maximum RPM is reached.
4) Reset the idling back to 800-1000 RPM where engine is smooth.
You reached the optimum point of efficiency & power.
Ye genuine setting hoti ha iski?
Yes brother it is factory settings
thanks for idle speed screw 👍
Welcome
Gypsy 1998 model me kese set kare
Bhai outstanding video bnai hai very professionally explain way of explanation is unique thanks in tons brother.
You are welcome.
Is setting ka cng may koe farak prta hai Kya?
g parta hai
Sir ji, engine change karane ke bad gaadi overheat Ho rahi hai, 3rd and 4th gear me dhakke Mar Rahi hai, kya ye lean mixture hoga? Fan and coolant sahi hai....!
Heating is not related to mixture, engine has some issues. Get it checked by some expert.
Mai air fuel mixture screws jitna tight krlo ya loose krlo engine mai koi change ni ata. Our sparts plugs kholo to us pr petrol hota hai.. ye kya masla hosakta hai.
Kya 1300 cc crolla ka mixture b aisay hi set hoti hy.or agr ye device na ho to phir r.p.m kesay check ho
Min time for getting color change?
Bhai sb,aisa karnay say average per liter petrol kia ho gi ?
ache ho gy ge
Bhai aap ki shop kahan hay mein to es carborator ke mamle mein zalil ho chika hoon aap mughe sahe mistari lagte hain
Koi ni bai koi keta hai 1 chakr kholo koi 2 or koi 7 sab drama hai
Sir apki workshops Pakistan main kahan hy
Salam Walekum Ustad ji bahut Jabardast aur bahut acchi video Bandiya aapki bahut Sab cancel kar rahe hain aapse
I make electronic auto switch for mehran car with ic 555 and thomister same fitting thromu switch
Bhai jan ap aik video mehran k rpm ki settings per alag sy bnay, idle mixture screw ko complete open ker k kitni turn close kerna hy to rpm 800 tak set huta hy. Kun ap k pas techometer hy. Jis k pas ni hy uska faida hojyga. Apka shukria.
Bhai itna minimun rpm rakho jis pe engine vibrate na kery aru speed reasonable lagy.
@@TechnologyExpertAsif bhai us rpm per headlight on kero to battery k voltage 12 volt per ajty hen. Matlab battery charging ruk jati hy. New generator b lgwa liya hy, masla woi hy jo pehly tha. Mechanic ko aik he kam huta hy k race bharha do. Jis sy petrol ki average disturb ho jati hy. Koi hal hy iska ap k pas????
@@saqibrehman4701 Bhai yeh rpm ka nai generator ka problem hai
@@TechnologyExpertAsif generator already changed. Still the issue same
Good, ap ne kuch technical points ka khayal to rakha jaise k engine ka optimum temperature pe hona lazmi hai. Lekin ager her 2 week k baad setting adjust karni pare gi to mixture setting main 1 se 2 month lag jain ge. Koi aur tareeqa hona chaheye.
ruclips.net/video/IoDiS3Gjqrw/видео.html
Plug inspection se kar lo car aur bike ka same tareka hai.
@@TechnologyExpertAsif Ap Karachi main hote hain?
@@mrkhan147 No dear
Mere paas Maruti 800 DX Five Speed 2001 Model hai. Total Running 37000kms.
Jab me ise Non AC Drive kr raha hu to kuch problem nahi aari hai, lekin AC me drive krta hu to 4-5 km ke baad iska temprature needle badh jaata hai normal position se,
Fan bhi chal rha h, Coolent bhi hai, Oil bhi hai,
First time jab aisa hua to reserve tank me coolent boil hone lag gaya tha, aur temprature high pahuch gaya lekin jese hi AC off kiya sab normal ho gaya,
Mechanic ko dikhaya to wo bol rhe h ki GASKET ka problem hai, lekin gasket ka issue hota to NON AC bhi to bubbles aane chaiye the, aur coolent me OIL ka koi sign bhi nahi h, smoke bhi normal aara hai,
Meri gaadi me shayd thermostat bhi nahi h. kya yeh iska issue ho skata hai?
Please help me to find out the issue
Thanx sr g 🙏🙏🙏🙏🙏🙏
You are welcome
1 turn 360 degree hai ya 180 degree
1 turn 360 ka hota hai kuch log 180 ka b kehty hian but ap best rpm pe set karo regardless turns, as carburetors differently behave karty hian mixture ko
Full close ke taraf ly k jao jahan pe rpm drop start ho jain wahan se about half turn 180 back kar do. Acha result mily ga
Car me spark plug konsa use kare carburettor modal me
Dear Denso is best plug to use.
Sir I'm getting a milage of 10km/hr in m800 1998 AC carburettor model what could be the problem????
Clean the carburetor
Shop address Bhai???
Bhai silencer agar ENGINE ke pass se leakage ho to
Informative video
Thanks
Bhai is Sy car ka A C chaly Ga???
G Chaly ga
Sir fuel kam aur air jada jane per kya miage kam ho jati hai
Dear No, it will not happen, as with more fuel rpm decrease and with more air rpm increase. Only ideal mixture will give best performance. For reference please see my plug inspection video. ruclips.net/video/IoDiS3Gjqrw/видео.html
Sir Mara pass santro Hai os ka 2 plus bohat zada brown Hai 1 plus black huwa Hai hor 1 plus black and brown Hai is ka kya Matlab hai
Dear, it should be brown for best performance at black it takes more petrol so making it black. You should try about 3 to have light brown.
Sir 3 plus brown Hai 1 plus black Hai problem kya Hai plus b Change Kar deya Hai pher b 1 plus black hai
Bhi apki loc kya h
Aslam o Alaikum bhai mere pas mehran 2004 model hai car 1st aur 2nd gear mein sahi chalti hai jb hum 3rd aur 4th gear mein jate hain to gari speed nai pakarti plz baatein kia masla hai
Air filter lagaker tuning nahi kertay kia?
G karty hain
Mager aap nay hataker ki hay
@@TechnoEveryday Just for my ease
bhai jan me ne mehran ka engine bnwaya tha gari silencer se paani maar rhe thee thora thora lekin distributor ki setting ko jb change kiya to ab paani ni maar rhe , distributor cup ki setting se gari paani marna bnd kr deti ha ?
aur agr gari paani ni mar rhe silencer se to is se koi frk prta ha , pls is ka jwab de shukriya
Dear Bhatti, Subah ke wakt jab car start karty hain to thory dair tak white dhuwan aur pani chorna chahiaye pher jab garam ho jati hai to band ho jata hai dhuwan aur pani, engine us wakt khulta hia jab silencer me nami any lag gye yani geela geela rehny lagy. 3 chezain buhat important hain 1. Tappet clearance 2. plug and point proper setting 3. timing adjustment in se engine ke life bharty hian aur mehran ka engine 150000 k bad khulta hai. Shell oil (purani car to 20/50 agar new hai to 10/40) use karain.
@@TechnologyExpertAsif bhai jan ap kis city me hotay ha mujy ISb aur PIndi me koi acha mechanic recommend kr skty han ?
Hello my friends i have 28 years old maruti 800 , so for this old car which oil can you advise me , what number oil
Hi, Shell 20/50 is very good engine oil to use in old car.
in cold climate like uttar akhand, kashmir, Shillong, etc, 20-30 or either of these is ideal for fuel economy.
In hot climate 20-50
because in hot climate, engine oils tend to become thinner hence less protection for wear and tear
@@TechnologyExpertAsif thank you brother
@@edwardrsohtun12 thank you brother
Masha Allah bhai Cdi lagany ka tareka dakai ignition timing
Nice video.,
Thanks
Mera gadika 3 number plug hamesha kala color h kayse adjust kare
Dear that is computer systems car you need help from some expert.
sir suzuki margalla 94 ki petrol setting with air fuel mixture kaise karen ge or idle pe vibration kaise khatam ho ge
Assalam o alaikum bro mere sath mehran 800cc hy mai ny kuch den pehly os mai petrol ki setting ki hy but ab jab b mai petrol mai kuch 5 ya 6 km jata ho to gari band ho jati hy per cng mai start ho jati hy magar petrol mai start nhi hoti agar kuch help app kary mehrubani hogi app ki thanx.,,
Adnan sahib, filter cover utar ke petrol pe kar ke race bar bar de kar dekho petrol a raha hai k nai. Aur mixture ke screw 4 turn out karny they ap ny kahen tight to nahe kar dia. Tappet clearance and timing ke issue b ho sakta hai aur current chorny ka issue b ho sakta hai.
G bilkul bro fuel nhi ata workshop waly ny kaha unit change karo wo b change kar di fuel pump b change ki aur app ki bath sahi hy qk mai ny new unit dal di jab gari band hoti hy to per unit tak awaz nhi karta per 3 ya 4 ganty bad unit awaz b karta hy aur per gari start b ho jati hy.,
Sir carbourator ka front pa jo screw laga hota he wo fuel mixture hota he ya nahe or kia usa 1.5 turn khlna chahia kio ka kuch vedios me maruti 800 ka yahe wala screw 4 turn khola he or samne carbourator ka jo ak screw hota he wo 1.5 turn khola he full tite kar ka kindly help
G Sir, Maruti ka isis tarah karty hain per mehran ka nahe, yeh mehran hai pakistani.
@@TechnologyExpertAsif to front wale screw ko tight rakhon or back wale ko 4 turn kholon full tight kar ke?
Thanks .
@@waqaszafar3928 Yes, Right, and then after running 500 km inspect plug color and adjust accordingly.
@@TechnologyExpertAsif Sir spark plugs per dry carbon ai hoi he is ka kia solution?
Sallam bhai meri car vibrat krti hai ptrol par jab air mixture or petrol wala nat full band karta ho sahe ho jati hai
Brother carburetor clean hony wala hai
Ustad g me ne plug inspection ki ha mehran 2002 model cylinder 1 ka spark plug black ha baki 2 plugs almost ok han , is ka kiya matlab hoa ??
koi problem nai thora petrol kam kar do mixture 1/4 tight kar do bus. Agar na b karo to thek hai
@@TechnologyExpertAsif ok boss thanks
@@FarhanKhan-iq6uk you are always welcome
Alto vxr ka bhi batao bhai
Where r you from
Sir buhat achi video , me ne setting ki ha carbeurator ki lekin meri gari me masla usi trah ha , masla ye ha k gari k gear change kr k jab me race deta ho to aik jhatka ata ha , neutral kr k jab race deta ho to 1 sec k liye gari ki race rukti ha phr theek ho jati ha , kiya masla ho skta ha pls rply aur bhai jan apna mobile number b share kr den shukriya
Carburetor clean hony wala hai. tappet aur timing set karo plug saf karo mixture set karo.
@@TechnologyExpertAsif bhai jan carburetor to i think 9 se 10 months pehly full saaf kraya tha us me mechanic ne aik jet same rehny diya tha aur aik jet shayd 82 ka daala uski waja se jhatka to ni ha kahi ?
@@FarhanKhan-iq6uk usi ny kuch garbar ke hai. carburetor car ka dil hota hai jis tara dil ka valve band hogye to banda nai chalta use tara carburetor ka valve b sensitive hoty hian.
@@TechnologyExpertAsif thanks
@@FarhanKhan-iq6uk you are welcome
Bro jab gari aisy 20 km ja k garm hoti hy tho kya issue ho sakti hy.,??
Sir, engine work properly at its operating temperature. So we are to get it hot for proper air fuel mixture.
Thanks
You are welcome
MashaALLAH.jeo.bhai jeo
Pleas i need traduction for this vidéos on english
where is your workshop
मेरे कार्बोरेटर में क्या दिक्कत है जो खींचने पर गाड़ी स्टार्ट रहती है और चौक छोड़ने पर गाड़ी बंद हो जाती है क्या करूं
मेरी गाड़ी चौक खींचने पर स्टार्ट हो जाती है और चौक छोड़ने पर बंद हो जाती क्या करूं
Mere pass maruti zen hai 1998 model uska rpm up down hote rehta hai kiya ploblem
service the carburettor
Sir maruti 800 ke max rpm kitne hote he
Dear, Idle rpm should be between 750 to 950
۔ازان کی وقت باتیں نہیں کرتے۔میرے بھائی
Great ! My only wish is English version of the same !
Brother I will try to make it.
Bro Suzuki cultus bht petrol khti h thora usky bry mn video bnain
Meri gaadi 8km mileage deti hai us Mai Kya problem ho sakti hai
Air fuel mixture, Tappet adjustment or timing or all these.
Jo aapne ISS video Mai bataya hai woh sab karna hai
Aur Maine spark plugs naye lagaye hai aur Jo bottle carborator ke nazdeek hai us Mai laal oil hai
Plz bhai
Khyber car ki ideal aur fuel mixture ki setting Kahan Se hoti hai
Bhai aier fiule mixture kitna round gumana h
4 Turn out and then have to inspect plug after 500 KM running and readjust accordingly
Bhai gadi stat nhi ho rhi hai
Sir tecometer kitne ka he
Sir, It will cost 1500 to 6000 depends on quality.
Brother conversion btao carburetor se efi me !
Bhai ap ke shop kha py hai
Plz Bhai
Khyber car ki ideal and fuel mixture setting karke dikhayen detail mein
Can be done without tecometer?
yes, actually no need of tachcho meter.
step 1. increase idle speed so that the engine will not stop while adjusting the mixture.
2. tied the mixture until you notice that the engine starts vibrating
3. then loosen the mixture bit by bit the engine will again gain speed in rpm until you find the maximum rpm position,
that is the correct mixture position.
4. after that slowly loosen the idle screw till you find the correct idle speed that in the range of 800 to 1000 rpm.
after driving about 2 kms you can inspect the spark plug for fuel economy
Ustaj g ak bat to paki hai ap motercycle mistri ho😜
Dear, I am not motorcycle mistry or motor mechanic, I am engineer and make videos on the basis of study and workshop manuals, mistry can no do so, as they learnt the things from ustad g with ratta how to do without theory. ;)
Sir G Daihatshu coure ka b batein ..
ge good pasnd
Yar mri car b 20 30 mint bad grm hony lg gi hy achank sy pani b kam nhi jota
radiator cap check karo aur thermosensor check karo. Agar pani boil ho raha to heating problems agar nai to sensor problem.
Ye screw driver kitne ka a chota wala
Suhail sahib, yeh ap ko 100 ke range me mil gye ga
Bhai Maruti Jain ka average Kaise set Karen
Intek me jo vaal ho ta hai jo airfilter bode ke paip me lagta hai kaise kaam karta hai
Hallo
Bhai apki shop kahan hai
Suzuki Omni Ka petrol tank or petrol line service kese kare
Sarji Meri gadi Maruti 800 Hai Uska air mixture Kaise set karna hai Kitni Kitni Chudi kholna hai
2.5 full turn out.
Marothi 800 mpf mileg problem
750 rpm hoti hai
g 750 to 850
Bhi ap ka nambr mall sakta ha Gari chk krwani ha
maruti 800 carburetor se back compressor ho ya pataka fhode to kya problem ho sakta h please bataye ...8959431651
Very Bad video
Why you have change the RPM for adjustment of fuel while you have not consider any RPM while setting the fule to its optimum level
You use only theory of turns not RPM
Bad information
Charts are good
Wheel ailments
Bhai kya land mind se average Mein farak padta hai
g parta hai
No. Sand krone bhai
Salam bhai apka number mil sakta hy mai apk pass apni car set krwana hy
so
Meri gaadi 96 model h petrol bahut khaari h
Brother carburetor ke tuning karwao, jet check karwao ya change karwao