No need po, since gravity fed ang carb, pag mababa ang carb kesa sa tank kahit di na mag fuelpump freeflow naman, yung mga ka level ng tank ang carb yun need lagyan,
@@stockblockmotovlog9289 na trauma lang papsy nung gamit ko suzuki bandit 400cc din longdrive ko putulan cable🤣😂dibale na flatan ka wag lang talaga yan
@@stockblockmotovlog9289 It is not for an aspirated engine with original carburettors (which I cannot make work) I think I will do the same as you, place independent carburettors.
Paps good am po ask ko lng po pwde ba yan sa gsxr250? Kc ako din problemado din sa carb ko eh laking tulong tong gawa nyong convertion paps sana masagot nko paps
The best mechanic super galing support NYO Ito ❤❤
Ay salamat ng marame sir😍
See you soon sir🙏🙏🫡 Yung zzr KO nman sunod sir🙏🙏🙏
Buen trabajo, felicitaciones por
Good job idol, pangarap ko mka motor Ng 400cc kahit 2ndhand lang
Yes idol hanap kna ng nka junk😆 gaya nito sa murang halaga nabuhay sya😆
Wow sarap nyan sr pang brand new gas mileage nyan😀😀
Yes sir😁😁😁 kya lang race carbs😆😆😆
Wow,,galing talaga.
boss paanu if flatslide na 30mm diba sumasayad sa ibaba?
galing mo idol! thanks for sharing
Salamat idol, sana makatulong sa projectbike mo🤗🤗🤗
@@stockblockmotovlog9289 salamat sa pagnotice idol ako pala ung na-chat mo sa fb na may binentant VF400r
Amigo que carburadores usaste?? :( necesito saber
se ven como 125 normales chinos pueden ser de 250 o de 300
boss diba sumasayad sa hose ng tubig yong 4th carb sayaf kase sakin sa may brake side na carb sa tubo ng tubig
@@harold12303 nag trim ako konti sa part na un boss
Anung trim mo Idol yung hose na metal or bottom portion ng carb ?
What carbs did you use? I have one and i want do that
Keihin 28mm roundslide
Sir anong cable po ginamit m sa throttle cable galing carb?
Pang throttle cable din po, anything po, kasi puputulin nyo din sya for conversion🤗
Up more video to come godbless 🙂
Salamat idol😆 sharawt
Ano poh ang timing Ng fz400 KC ayaw umanda khit naka top na poh xa
Main jet,pilot jet menggunakan ukuran brp?
Boss, nasubukan nyo na magconvert ng ignition coil sa fz400 nyo?
Yes sir, individual
What carburetor model are you using brother?
Keihin 28 roundslide bro..
ok lang ba supply ng gas? Di po ba kinakapos pag yung gas tank ang gagamitin? Or nag install po kayo ng fuel pump po?
No need po, since gravity fed ang carb, pag mababa ang carb kesa sa tank kahit di na mag fuelpump freeflow naman, yung mga ka level ng tank ang carb yun need lagyan,
Wla po ba issue yung takbo po?
Sir wala kang pinalitan na jettings sa 28mm keihin carb?
Piinalitan din po sir🤗
👏💪💯🍀😎🏆
Kumusta naman po ang performance ng Fzr pag convertion ang Carb nya?salamat po
Aggressive po🤗
@@stockblockmotovlog9289
Salamat po atleat meron napo Idea pag need palitan ang carb ng Fazer ko.maraming salamat po
Hndi ba pwding gawing 1carb na malaki lng gaya ng mga 4wheels?
Marerestrict ang air flow, mas ok pa rin ang indivudual sir🤗 these bikes are made to rev high
paps gnanyan ko un z400 ko hagok ee,ano b tamang kettings slmat
sir ano kaya pwedeng carb sa suzuki bandit 250 maraming salamat po agad at happy new year
Kahit anong pang 250 sir basta same naka tayo, wag naka tingala, ridesafe po salamat
@@stockblockmotovlog9289 sa inline 4 po na 250 cc sir ask ko nadin po kung ano papaltan sa lood na jettings maraming salamat po
Ano po jetting gamit nio
Saan location ng shop?
Racing carb ba yan papsy convert pwede pala sa inline 4 mukang malakas topspeed lalo pag naka rcarb tunog pa lang parang v12
Yes po😆 keihin round
@@stockblockmotovlog9289 hope di mapatid yan cable papsy,kasi madalas naiinitan ng makina kasi
@@kimenriquez3280 wala namang cable na di napapatid papsy😅 siguro ill wait for their time nalang😅😅 wag lang sana sa byahe😆
@@stockblockmotovlog9289 na trauma lang papsy nung gamit ko suzuki bandit 400cc din longdrive ko putulan cable🤣😂dibale na flatan ka wag lang talaga yan
@@kimenriquez3280 tama tama papsy😆😆😆 mahirap walang throttle😆
Malakas ba lalo sa gas pag ganto paps? Ilang kpl?
Di nmn po, sakto lang..mas agressive sya pag plunger type
Idol 28mm carb ba ginamit mo .?
Yes idol
How about the fuel consumption?
From 1-10, may be 3% increase
@@stockblockmotovlog9289 i have gsf 400 and use 2 carb28. Is very2 lot consumption fuel.
Try fine tune
@@stockblockmotovlog9289 oke thanks mate.. cheers from indonesia
Ayos idol 💪 hindi na ba ma repair ang original carb nyan?
Wala na po syang original carb idol😆, kaya napag pasyahan na iconvert.🤗
hello, how much valve light does that motorcycle have?
Hi there! What valve light do you mean..
@@stockblockmotovlog9289
to the regulation of valves in exhaust and admission
Dont know exact bro, but i can measure, for what purpose?? For turbo??
@@stockblockmotovlog9289
It is not for an aspirated engine with original carburettors (which I cannot make work) I think I will do the same as you, place independent carburettors.
Yeah bro, it has aggressive throttle response.. Cheers..
Paps good am po ask ko lng po pwde ba yan sa gsxr250? Kc ako din problemado din sa carb ko eh laking tulong tong gawa nyong convertion paps sana masagot nko paps
Yes po sir pwede,salamat po🤗
Ay slmt paps sa kasagutan laking tulong ka po sa problema ko😄👌
Anong manifold po gamit niyo? Salamat po more power!
Ah yes po, stock po sir, salamat po🤗
Class A na keihin??
Yes idol
anu jettings nyan boss
Malakas ba sa gas bossing?
Around 15% addittional sa consumption, pero di ko ramdam sir, deoende sa driving style, takbong pogi lang ako madalas😆
4pcs 24mm carb ba sir sapat na sa gpz?
Kahit 26mm po, stock 30mm kasi si gpz400 pero diap.
Hello po. Pano po yung manifold?
Stock po
Paps anong size ng mga carb?
28mm paps😆
Salamat paps. May fz400 din ako sana makaride tayo minsan
Sir ilang mm carb m po?.
28mm po sir🤗
@@stockblockmotovlog9289 eto nmn sir pano sya e tono hehehe
@@stockblockmotovlog9289 naka ilng ikot ka sir each?.
Boss'
Yes bossing🤗
Why don't you wear proper work clothes & PPE when doing automotive tasks ? You could get badly injured or lose an eye one day .
Thanks for your concern bro, I will be more carefull when doing those job, I dont have a proper gear at the moment😅, I'll get one soon🤗
Boss pm mo ako patulong naman sa cbr 1000 ko
Sge bossing🤗
Boss pm mo ako
Allan cervantes name fb
sir balak ko magpaconvert ng cbr250 mc22 ko location ko bacoor taga saan kayo sir and ano facebook niyo para mamessage ko
Ano po jetting gamit nio