I can’t wait to give this a try! A definite improvement over the original and the original was already great! I like the green for the back of the helm, but I prefer to go with Rustolium deep forest since that seems to have the same effect your going for.
Honestly, that tip for not putting the supports under the dome and just heating up the strings is genius. That will definitely save hours off my next helmet print
thanks for the shoutout dude! also never thought about heating up the stringy bits inside the dome to flatten them, but I usually just glue my padding over that anyways since I'm lazy and no one will see it lol
I absolutely love these videos and I got to say a major thank you for the resin idea I use to use filler and sand for about a week now I only spend an hour or 2 sand
My first helmet with your designs came out awesome. Due to time constraints and not wanting to pony up for a mouse sander, I hand sanded mine. I got a lot of compliments at cons and on Halloween. Thanks for your tutorials.
I'm doing a phase 2 clone, would this resin method be preferred over the Bondo/ filler method? Seems to save a ton of time, not sure if it had downsides. Thanks!
yo bro , ive bought your files and im now on the project , i am looking from where dide you get the armor decal ( kill stripe , shoulder and chest decal) thx. I just wanna command a bad sized decal
Great video. I ended up using the same paints and yellow frog tape but it left some residue. Any recommendations on how to remove it without damaging the paint?
Is one type of resin better than another. I’m using an eco friendly one that doesn’t smell and I use a ivy box overnight and it’s still a little tacky but it sands easily
Does the visor press up against your nose. It does for me and is kinda uncomfortable after a bit. I also had to put pads in it cause my first one was too big.
Would you recommend the UV flashlight you use? Also, how did you determine your new colors? This has been one of my biggest struggles with Boba. I probably have 10 different 'greens' that I tried. I ended up going with Rust-Oleum Hunter Club Green for the body and RO Hunter Green for the cheeks. Thanks!
Putting these here since the description is a little off and using direct links. Hope I got them right. Montana Black BLK-3062 Cardinal BLK-6060 Celtic BLK-6070 TAG green BLK-6530 Storm Montana Gold G8020 Sahara Beige CL6410 Manila Green
from everything I've seen this is the fastest method for sanding. if I wanted a more glossy coat, should I just skip the truck bed coat? not making a boba fett, more of a custom to my personallity manalorian costum.
Just started binging your series yesterday! Think I’m going to attempt a rearmored fett, since I just got a 3D printer! Probably going for a happy medium between Mando and Book of Boba Fett, leaning more towards Book of Boba Fett though.
Thanks for This awesome Video, im Building a boba fett cosplay also and your Instruction are a big help. Ps; also thanks for the names of the colours, i would have Never found them 🙏🙏🙏🙏🙏
I absolutely love these videos and I got to say a major thank you for the resin idea I use to use filler and sand for about a week now I only spend an hour or 2 sand
I like to imagine boba sanding, taking, and painting his armor when he got it back
Thats a cool method with the resin!
I can’t wait to give this a try! A definite improvement over the original and the original was already great!
I like the green for the back of the helm, but I prefer to go with Rustolium deep forest since that seems to have the same effect your going for.
Honestly, that tip for not putting the supports under the dome and just heating up the strings is genius. That will definitely save hours off my next helmet print
thanks for the shoutout dude! also never thought about heating up the stringy bits inside the dome to flatten them, but I usually just glue my padding over that anyways since I'm lazy and no one will see it lol
Hey whatever works!
I absolutely love these videos and I got to say a major thank you for the resin idea I use to use filler and sand for about a week now I only spend an hour or 2 sand
Looks great! I love the files I got from you for the Heavy Mando. Keep up the great work!
You guys should really try sanding the raw print with some 80g first, it'll significantly cut down your post processing.
My first helmet with your designs came out awesome. Due to time constraints and not wanting to pony up for a mouse sander, I hand sanded mine. I got a lot of compliments at cons and on Halloween. Thanks for your tutorials.
I'm so glad to hear that!
I'm doing a phase 2 clone, would this resin method be preferred over the Bondo/ filler method? Seems to save a ton of time, not sure if it had downsides. Thanks!
You should really make a cobalt hero arc trooper helmet from battlefront 2
Yes I should!
Love your videos, we're learning a lot . Will there will be a bo katan armor video ? We would love to see a nite owl armor vid ..
Is there a website or a general direction u can point me in to find Colors for a rotj boba fett colors
Thanks for the videos. Do your files, this one in particular, contain the files cut into smaller pieces for smaller printers like the Ender 3 S1?
saw this on Instagram! Love all you do, dude.
did boba fett chance the side where the mythosaur logo was? i swear it was on the other side? or maybe both?
Speaking of shore troopers, would you ever consider making a shoretrooper helmet, or even full armor set?👀
You going to make the 3d model for the black flight helmet from battlefront 2?
The story line I mean
Sorry this comment is late but, do you also resin/sand all the accessories before primer? Or do you just do a coat of primer and that’s it?
Can you make the warhammer 40k Tempestus Stormtrooper helmet?
60 hours. What kind of printer and the speed ? Thank you
yo bro , ive bought your files and im now on the project , i am looking from where dide you get the armor decal ( kill stripe , shoulder and chest decal) thx. I just wanna command a bad sized decal
Excellent video on how to build and paint a fett helmet! Thank you for making it
I just finished my custom mandalorian armor thanks to your awesome ideas
How long did you wait between painting in different colors and how many paint layers did you do?
printing now, I have an a1 mini so I had to make a few extra slices 😂
Have you got the visor template?
You are one of the best creators on youtube I'm glad I know about your channel
Thank you so much 😀
Are you printing overnight with a print like this? Cuz I want to print stuff like this on my ender 3 s1 but dont know how
if you turn the face shied upside down wouldn't that put the lettering in a place that would be cut away?
Are you able to see out of it well?
Do you put resin on the inside of the helmet or the range finder? I see it's a darker grey later in the video. Did you srayer the filler on it? Thanks
I hope one day you build the Evo trooper helmet from The Force Unleashed
Why is there an orange bit at the end of the riflw
can you print this in one piece on a ender 3? or Anycubic Vyper?
Great video. I ended up using the same paints and yellow frog tape but it left some residue. Any recommendations on how to remove it without damaging the paint?
Just do it and damage the paint 😂 it’ll match the boba battle damage vibe
Is one type of resin better than another. I’m using an eco friendly one that doesn’t smell and I use a ivy box overnight and it’s still a little tacky but it sands easily
I don't believe it matters but I haven't thoroughly tested it
Does the visor press up against your nose. It does for me and is kinda uncomfortable after a bit. I also had to put pads in it cause my first one was too big.
It does but that's just the price I pay for having a big head
@@GalacticArmory same 😔
whats the width of the helmet? Im trying to make a costume and im interested
You Honor boba with this creation, I HAVE SPOKEN. LOL!!!!!
You look good in your BOBA FETT costume.
Hi, do you have any plans of making any arc170 flight helmets?
I'd love to but first want to figure out how to do the clear goggles
If anyone has any confusion,
Montana Black = Matte
Montana Gold = Semi Gloss
Montana White = Gloss
Both black and gold are matte, but white is gloss yes
I feel the vertical part of the t visor area is too thick tbh
Montana black is awsome paint drys fast dosent stink like krylon and rusto
Would you recommend the UV flashlight you use?
Also, how did you determine your new colors? This has been one of my biggest struggles with Boba. I probably have 10 different 'greens' that I tried. I ended up going with Rust-Oleum Hunter Club Green for the body and RO Hunter Green for the cheeks.
Thanks!
1 more question - what did you use as the orange cap for the EE3? Thanks!
How much uv resin is used per helmet?
Did any of the soft parts change in the book of boba fett trailer change?
Yep, belt for sure
Putting these here since the description is a little off and using direct links. Hope I got them right.
Montana Black
BLK-3062 Cardinal
BLK-6060 Celtic
BLK-6070 TAG green
BLK-6530 Storm
Montana Gold
G8020 Sahara Beige
CL6410 Manila Green
the yellow strips on the helmet are red in the tv show
Still finishing my helmet up! I'm hoping I can wear it.. my head is massive. 🤣
from everything I've seen this is the fastest method for sanding. if I wanted a more glossy coat, should I just skip the truck bed coat? not making a boba fett, more of a custom to my personallity manalorian costum.
This makes me wish someone just had basic mandalorian helmets, like with or without the target system
Just started binging your series yesterday! Think I’m going to attempt a rearmored fett, since I just got a 3D printer! Probably going for a happy medium between Mando and Book of Boba Fett, leaning more towards Book of Boba Fett though.
Same, I like the silver bits on book of boba armor but the colors on the mandalorian armor look nicer
When you update a file will the ones who’ve already bought the file get the updated one??
Yep! Says so on his website
Just curious did you save money with this project? or did you just want the challenge ? Its a very good job btw .
Can we see you make a custom mandalorian helmet
This is the way
Almost the perfect suit then you went and made the pads piss yellow lol.
Fr though outstanding work.
I Love Bobba Fett
I want to make this 😍
Looks very 👍
Thanks for This awesome Video, im Building a boba fett cosplay also and your Instruction are a big help.
Ps; also thanks for the names of the colours, i would have Never found them 🙏🙏🙏🙏🙏
Make Commander Fox's helmet,PLEEEESEEE!!!!!
NERD! Impressive, Bounty Hunter, most impressive.
please i buy your complet armor, please tell me a price ! i buy it ! i from france
Awesome 🙂👍⭐⭐⭐⭐⭐
Random question Do you ever just walk around your house in your suits for no reason
For the release of halo infinite, can you make spartan armor
That would be so cool
@@GalacticArmory thanks so much for doing that
Oh look at the helmet
Black= black label I suspect. Like premium.
I think this looks more like the book of boba Fett helmet then mandalorian boba
It si amanzing!!!!
I just thought it was the game stop one
Hi
Excuse me Daddy? Sorry. Daddy? Sorry. Daddy? Sorry.
So wait is it the Pokemon who say boba Fett or like something else......
I'm new to channel
CONGRATES TO WHO EVER IS SEEING THIS COMMENT!
Cut a paper draft of the visor first.......
if it don't stop REAL bullets, then its crap
Aye first
14 seconds ago
First
I absolutely love these videos and I got to say a major thank you for the resin idea I use to use filler and sand for about a week now I only spend an hour or 2 sand
First
First