Engineering Drawing/Projections of planes Hexagon Diagonal

Engineering drawing/ engineering graphics/engineering drawing for first year / engineering graphics important question /ITI drawing /adityakhandare/drawing/problems on ED/easy method/drawing tutorial/first sem /second sem/polytechnic/diploma / civil / mechanical engineering

[@blazetgb1660]

hexagonal lamina of 20 mm side rest on one of its corners on the HP. The diagonal
passing through this corner is inclined at 450
to the HP. The lamina is then rotated
through 900
such that the top view of this diagonal is perpendicular to the VP and the
surface is still inclined at 450
to the HP. Draw the projections of the lamina.

[@nitinsawarkar475]

Very Nicely Explained Prof. Aditya👍.

[@adityakhandare]

Thank you Nitin Sir for the appreciation 🙏😊

[@raghavendrakumarsingh4646]

its a very great explanation of projection of planes

[@adityakhandare]

Thank you Raghavendra Kumar

[@unitedstates9652]

A hexagonal lamina of sides 25 mm rests on one of its corners on HP. The corner opposite to the
corner on which it rests is 35 mm above HP and the diagonal passing through the corner on which it
rests is inclined at 30º to VP. Draw its projections.

[@adityakhandare]

once again go through the video you will find the diagonal is making an angle with VP and not the Top View is making an angle. The same video provides you the solution you need to alter your dimensions and measurement of the plane in your given problem. Hope it will help with your query. Thank You

[@shivamsherje4829]

You are always favourite sir ❤️❤️❤️❤️

[@adityakhandare]

Thank you Shivam..

[@stkgamer399]

Amazing👍 Sir

[@adityakhandare]

Thank you dear 💕

[@queengamin69]

4. A hexagonal lamina of side 30 mm rests on one of its corner on H.P. the diagonal containing the corner inclined 60° to V.P. The surface of the lamina is inclined 50° to H.P. Draw its projection

[@adityakhandare]

once again go through the video you will find the diagonal is making an angle with VP and not the Top View is making an angle. The same video provides you the solution you need to alter your dimensions and measurement of the plane in your given problem. Hope it will help with your query. Thank You

[@sshrivastava9011]

30 degree angle opposite direction me le skte h????

[@adityakhandare]

Yes you can take.. As your are comfortable😎

[@vaishakhgube5358]

Nice video...

[@adityakhandare]

Thank you so much

[@yashchincholikar2322]

It would be good if you mention the question in the description box so that you will increase your reach even and it would be good for students to search too

[@adityakhandare]

Thank you for your valuable suggestions

[@manvirsingh6396]

Thanks sir

[@princesslife7461]

Congratulations sir

[@adityakhandare]

Thank you Sir

[@adityakhandare]

Thank you Sir it means a lot

[@letsdoit...554]

A hexagonal lamina of 30 mm side rest on one of its corners on the HP. The diagonal
passing through this corner is inclined at 45 ° to HP. The lamina is then rotated through
90° such that the top view of this diagonal is perpendicular to VP and the surface is still
inclined at 45° to HP. Draw its projection.

[@stkgamer399]

Thank u
Sir

[@adityakhandare]

Hope the video was helpful to you 😇🙏

[@kalpanaladhi8443]

👍👍

[@adityakhandare]

Thank you Kalpana 😊