Yellow= Constant power, Red= ACC on/off power trigger, Black= ground, Orange= backlit illumination, Orange/Black= Brake (ground for DVD playback), Pink= reverse camera trigger, Blue (Blue/White)= power amplifier trigger(and/or)powered antennae booster, Green=Canbus (+) Green/Black= Canbus (-). Tap 2 cigarette lighter wires for Red ACC power & Orange illumination wires.
1 sorry for ...... vide/sound quality may this will help 2 from the radio you need only Red wire to ignition on , Yellow wire for 12 volt source, Black wire Ground , 3 Use wire hardness that have power and ground looped with radio canvas box 4 NO key , elimination,exedra wires should NoT be connect! It will work from canvas. 5 connect the optic fiber box to same as RED to ignition (from the box u probably have it yellow you need to power it when car on only ) and ground please send picture 6 car canvas the under glove box brown with red line is positive solid brown negative, two green coming from radio canvas make shore you have the right 2 green with black line negative solid green positive. ( if you have green wires from optic box connect them together with car and radio canvas Good luck hope was helpful
good morning, i have a w211 and i bought an android from aliexpress brand isudar, I followed the instructions of the seller, he said that connecting the black and yellow and red plug acc does not need to connect connected and does not turn on after connecting the acc to the + the it works without sound but it used up the expensive battery can give me a help
Hi thanks so much for taking the time to share your instructions on RUclips. I have a question I have the same radio android unit but I got two of them because I thought one was broken but it’s not broken. I’m not getting any sound at all. I connected everything like you said. Yeah I know it’s a constant read to key to cigarette lighter but I’m still not getting any sound
Sorry I’m in Florida, don’t know anybody in Canada but a good aftermarket installer place that have experience installing those android system should be able easily to help you just call and check around that will be my suggestion
@@jayheritageclub7852 Thank you, another friend of mine gave it to me, but I don't have the adapter and plugs. Is there a store that sells it? It would be more useful if it was in the form of a diagram drawn on paper. Thank you
A have a w211 2002 e320 I bought a radio like yours. I need the fiber optic decoder to work? I don't want to use the 6 cd. I have to buy the decoder because I think it doesn't have it. And can it be mounted without the decoder? Thanks in advance
Anghel Andrey hello , if you have fiber optic wires and you using factory amplifier that yes , and it depends on your factory connection/plug, but if you going to switch amplifier to aftermarket then no . If needed more help message me .
@@jayheritageclub7852 If I want to cancel the optic fiber and I have seen that the amplifier comes out with the 14-wire pin plug that leads to each speaker. And I thought later to remove each corresponding cable from the output of the radio and connect it to the output of the original amplifier and leave the rest untouched if you leave the email I will send you photos. Thank you
Dear sir, this is great video that helps a lot. I got my work but experiencing 2 issues: 1. How did you hook up the antenna adapter to the vehicle amplifier? You mentioned something under the neath of the cup holder, how did you connect it? 2. I have the CD changer no longer anymore, can you shed some more lights? Thanks!
Hello, for antenna I purchased hidden antenna and install it on windshield from inside, cd changer not going to work with android it’s set only for factory application , hoping it was helpful.
@@jayheritageclub7852 thank you so much! I have not had any luck making the cd change work yet. However, just want to share with you and everyone that I made the Antenna work without a hidden antenna. I bought a 19ft antenna extension cable like I said, one end (female) connected to the android antenna adapter from. I had been had issue finding the other end somewhere in the trunk. Finally, I found the connection near rear seat behind the driver site, NEAR the door frame (behind the narrow foam between the seat and the door frame). After I connected well), the FM signal is very good and stable!). Hope this can benefit the rest of folks who has the similar issue and struggle
@@jiyouguo7513 cd changer have to communicate with factory modules so when adding a aftermarket head unit cd changer won’t work, thank you for antenna update great info but I just downloaded radio app that work great and easy for me.
That you for the video I was able to use it to power up my new unit but only thing is I’m not getting sound. It appeared my canbus doesn’t have that green wire that yours have that goes to canbus connection under the glove box. If you can help me out let me know thank you
Hi how did you do for radio to turn on just putting the key in I’ve installed mine but I have to turn key1 to turn on and also how do you make the hazard panel open and close as mine is not moving at all?? Thank u
For turn on with key use the same factory wires for power and for constant power use the cigarette lighter wiring , for a CD changer to open and close you need to use optic fiber box so it will mimic the factory set up .
Super Cars on fiber box you’ll have one yellow/red and black , do you have anything else but 2 wire and 2 rca? , and from the radio hardness you have red , yellow , black correct ? If so black for the radio and black from fiber box connect together and connect them to brown from cigarette lighter that all for ground, now the power, power wire from aftermarket radio is probably one red and one yellow , take the yellow connect together with wire from fiber box( power one ) and connect to white and red stripe wire factory radio hardness , now you have left red ( acc) from aftermarket radio connect that wire to white and red stripe for cigarette lighter hardness you should have power, but if no sound let me know I’ll explain how to get sound, good luck.
jayheritageclub Hello, I have got the same decoder as yours. I have connected everything as you have shown but there is no sound. Can you tell how to turn on the sound?
Question. I followed instructions and the head unit was working, until I final install and put all back together. Then the unit didn't work. I thought I may have blown fuse. But put old unit back in and that works. It seems I have no power to the new head unit anymore. Could I have damaged the new head unit? Fuse in the new unit is ok, but no power to it?
MDTA Self Defence it’s possible but don’t sound right if the fuse in the unit is okey , I would recommend to test the fuse or replace it with slightly stronger one and I go over you connections with theater or multimeter and final test for unit connect directly to battery to test it good luck hope it was helpful
Same issue here with my 10 inch touch screen android unit , had every thing working correctly then stopped one day , so I took it back out to check the fuse on the back of the new unit and it’s not blown , as far as the connections I have canbus signal from under glovebox (white&green ), power from cig lighter ( yellow to red & brown to black ) , and of course all 8 speaker wires ( purple to purple, white to white , green to green , gray to gray ) the unit worked great I was able to stream RUclips and blast my music, ( the previous owner had an aftermarket unit so he already installed aftermarket AMP , and he looped the fiber optic back into it’s self so I never had to mess with the fiber optic decoder
sorry for bothering...original audio has very small black connector center of audio. do you know what is that connector function? I connected all correctly but no work...haha..please help me . thanks
Hey, I installed the radio, everything works fine, steering wheel control works, canbus also. I recoded command and navi from SD, but I still have problems resetting the clock on dashboard in speedometer. I show problem on movie: ruclips.net/video/M4jOYPr1-Vg/видео.html Kiedy radio jest odłączone od kostek zegar nie resetuje się: ruclips.net/video/0vy3GeI267Q/видео.html The manufacturer says that you need to disconnect the black and green wires from the canbus decoder. But I asked for photos so as not to make a mistake and I am waiting for them
@@jayheritageclub7852 yes, new radio holds clock, settings, memorystation. Because it is connect to battery, and switch on and switch off via can bus decoder.
Radio should have read and yellow one constantly power one power with ignition correct? And in radio settings should be a standard by timer maybe need to be adjusted
Thank you for your opinion, but it does help other people It’s a little guidelines or tips for people who actually know how install radios and understand the basic for install
@@jayheritageclub7852 it definitly helped me to get some guidline. this this better then nothing and there are guide videos thats are far worser than this
Yellow= Constant power, Red= ACC on/off power trigger, Black= ground, Orange= backlit illumination, Orange/Black= Brake (ground for DVD playback), Pink= reverse camera trigger, Blue (Blue/White)= power amplifier trigger(and/or)powered antennae booster, Green=Canbus (+) Green/Black= Canbus (-). Tap 2 cigarette lighter wires for Red ACC power & Orange illumination wires.
Great video! Only video and audio are not in sync... could you please reupload the video?
Hello, I have a 220E, where can I get the connection diagram and connection adapters?
Where do the antenna wire go's
Thanks for your explanatory video, it has been very useful to me, it is a rather complex installation.
Greetings from Spain
1 sorry for ...... vide/sound quality may this will help
2 from the radio you need only Red wire to ignition on , Yellow wire for 12 volt source, Black wire Ground ,
3 Use wire hardness that have power and ground looped with radio canvas box
4 NO key , elimination,exedra wires should NoT be connect! It will work from canvas.
5 connect the optic fiber box to same as RED to ignition (from the box u probably have it yellow you need to power it when car on only ) and ground please send picture
6 car canvas the under glove box brown with red line is positive solid brown negative, two green coming from radio canvas make shore you have the right 2 green with black line negative solid green positive. ( if you have green wires from optic box connect them together with car and radio canvas
Good luck hope was helpful
good morning, i have a w211 and i bought an android from aliexpress brand isudar, I followed the instructions of the seller, he said that connecting the black and yellow and red plug acc does not need to connect connected and does not turn on after connecting the acc to the + the it works without sound but it used up the expensive battery can give me a help
my fiber optic decoder doesn't have the 2 green wires.. how do I get the can bus to work?
Will the unit power on without a canbus connection?
Where can i get that square box with two green wire that u plug under the glove compartment
eBay
Hi thanks so much for taking the time to share your instructions on RUclips. I have a question I have the same radio android unit but I got two of them because I thought one was broken but it’s not broken. I’m not getting any sound at all. I connected everything like you said. Yeah I know it’s a constant read to key to cigarette lighter but I’m still not getting any sound
I couldn't get any sound either, did you fix it?
do you need the Optical fiber decoding box at seicane ?
Hello i installed a radio in my sl55 everything works but no volume do i have to run a wire to the amp for switch on now if so which wire is it.
Aftermarket amp ?
Could I still wire it if my decoder box doesn’t have green wires and also can you tell me which wire goes where?
Can you suggest one technician who can install on MB211 year 2008, I am in Toronto
Sorry I’m in Florida, don’t know anybody in Canada but a good aftermarket installer place that have experience installing those android system should be able easily to help you just call and check around that will be my suggestion
Useful information: Where can I find these connection adapters? Can you send the connection diagram, thank you
Hello, usually the diagram will come with units or on it as sticker, for adapters I purchased my from EBay .
@@jayheritageclub7852 Thank you, another friend of mine gave it to me, but I don't have the adapter and plugs. Is there a store that sells it? It would be more useful if it was in the form of a diagram drawn on paper. Thank you
@@samsunggurgenidze2135 can you send pictures of the unit
Hei, where should i plug the to green wires from the fiber box?
A have a w211 2002 e320 I bought a radio like yours. I need the fiber optic decoder to work? I don't want to use the 6 cd. I have to buy the decoder because I think it doesn't have it. And can it be mounted without the decoder? Thanks in advance
Anghel Andrey hello , if you have fiber optic wires and you using factory amplifier that yes , and it depends on your factory connection/plug, but if you going to switch amplifier to aftermarket then no . If needed more help message me .
@@jayheritageclub7852
If I want to cancel the optic fiber and I have seen that the amplifier comes out with the 14-wire pin plug that leads to each speaker. And I thought later to remove each corresponding cable from the output of the radio and connect it to the output of the original amplifier and leave the rest untouched if you leave the email I will send you photos. Thank you
This is mai email.
Andreyanghel5@gmail.com
Anghel Andrey jayheritageclub@Gmail.com
Dear sir, this is great video that helps a lot. I got my work but experiencing 2 issues: 1. How did you hook up the antenna adapter to the vehicle amplifier? You mentioned something under the neath of the cup holder, how did you connect it? 2. I have the CD changer no longer anymore, can you shed some more lights? Thanks!
Hello, for antenna I purchased hidden antenna and install it on windshield from inside, cd changer not going to work with android it’s set only for factory application , hoping it was helpful.
@@jayheritageclub7852 thank you so much! I have not had any luck making the cd change work yet. However, just want to share with you and everyone that I made the Antenna work without a hidden antenna. I bought a 19ft antenna extension cable like I said, one end (female) connected to the android antenna adapter from. I had been had issue finding the other end somewhere in the trunk. Finally, I found the connection near rear seat behind the driver site, NEAR the door frame (behind the narrow foam between the seat and the door frame). After I connected well), the FM signal is very good and stable!). Hope this can benefit the rest of folks who has the similar issue and struggle
@@jiyouguo7513 cd changer have to communicate with factory modules so when adding a aftermarket head unit cd changer won’t work, thank you for antenna update great info but I just downloaded radio app that work great and easy for me.
I have the exact same Radio, but It looks Like my main cable is a little Different . is there some way to contact you Via Phone ?
with this box does the speaker wires connect also from the aftermarket radio
caymanrussian if you using that box your speakers will work from your factory amplifier
Название на русском а говорит по Английский
That you for the video I was able to use it to power up my new unit but only thing is I’m not getting sound. It appeared my canbus doesn’t have that green wire that yours have that goes to canbus connection under the glove box. If you can help me out let me know thank you
Need link to fiber optic decoder
eBay
Why I can’t hear radio or Bluetooth any sound ? Can you help me what ive done wrong ?
hello definitely i can try , where exactly you in your install step , which of optical converter you have ?
Which fuse do you change in the trunk on the Mercedes
I don’t understand your question fuse for watt
Hi how did you do for radio to turn on just putting the key in I’ve installed mine but I have to turn key1 to turn on and also how do you make the hazard panel open and close as mine is not moving at all??
Thank u
For turn on with key use the same factory wires for power and for constant power use the cigarette lighter wiring , for a CD changer to open and close you need to use optic fiber box so it will mimic the factory set up .
jayheritageclub
The fibre optic box mine has 2 wire with who do I connect them ?
Super Cars on fiber box you’ll have one yellow/red and black , do you have anything else but 2 wire and 2 rca? , and from the radio hardness you have red , yellow , black correct ? If so black for the radio and black from fiber box connect together and connect them to brown from cigarette lighter that all for ground, now the power, power wire from aftermarket radio is probably one red and one yellow , take the yellow connect together with wire from fiber box( power one ) and connect to white and red stripe wire factory radio hardness , now you have left red ( acc) from aftermarket radio connect that wire to white and red stripe for cigarette lighter hardness you should have power, but if no sound let me know I’ll explain how to get sound, good luck.
jayheritageclub Hello, I have got the same decoder as yours. I have connected everything as you have shown but there is no sound. Can you tell how to turn on the sound?
Iliyan Mladenov did you ever get a response about not having any sound?
Question. I followed instructions and the head unit was working, until I final install and put all back together. Then the unit didn't work. I thought I may have blown fuse. But put old unit back in and that works. It seems I have no power to the new head unit anymore. Could I have damaged the new head unit? Fuse in the new unit is ok, but no power to it?
MDTA Self Defence it’s possible but don’t sound right if the fuse in the unit is okey , I would recommend to test the fuse or replace it with slightly stronger one and I go over you connections with theater or multimeter and final test for unit connect directly to battery to test it
good luck hope it was helpful
Same issue here with my 10 inch touch screen android unit , had every thing working correctly then stopped one day , so I took it back out to check the fuse on the back of the new unit and it’s not blown , as far as the connections I have canbus signal from under glovebox (white&green ), power from cig lighter ( yellow to red & brown to black ) , and of course all 8 speaker wires ( purple to purple, white to white , green to green , gray to gray ) the unit worked great I was able to stream RUclips and blast my music, ( the previous owner had an aftermarket unit so he already installed aftermarket AMP , and he looped the fiber optic back into it’s self so I never had to mess with the fiber optic decoder
Aftershave watching this video i keep my original screen lol
Can't find where antenna go's
I remember I got hidden antenna and installed it on windshield from inside , but you can still connect the factory but I didn’t.
sorry for bothering...original audio has very small black connector center of audio. do you know what is that connector function? I connected all correctly but no work...haha..please help me . thanks
На утюг снимал ?
hard to understand. with the sync issue
MDTA Self Defence sorry for pure sound quality new and more detailed video will be up soon
Hey, I installed the radio, everything works fine, steering wheel control works, canbus also. I recoded command and navi from SD, but I still have problems resetting the clock on dashboard in speedometer. I show problem on movie:
ruclips.net/video/M4jOYPr1-Vg/видео.html
Kiedy radio jest odłączone od kostek zegar nie resetuje się:
ruclips.net/video/0vy3GeI267Q/видео.html
The manufacturer says that you need to disconnect the black and green wires from the canbus decoder. But I asked for photos so as not to make a mistake and I am waiting for them
I believe you can set clock In Spacial functions/hidden menu on dash but there is a good possibility that only can be done with the factory to command
@@jayheritageclub7852 i program via DAS clock setting into menu. But everytime ignition on my clock reset to 01:07.
Is new radio holds memory like radio stations , clock in radio, turns off when key out ?
@@jayheritageclub7852 yes, new radio holds clock, settings, memorystation. Because it is connect to battery, and switch on and switch off via can bus decoder.
Radio should have read and yellow one constantly power one power with ignition correct? And in radio settings should be a standard by timer maybe need to be adjusted
Y send you email
Probably the worse installation video of a radio on RUclips. all out of sync makes no sense.... take it down, just confusing people.
Thank you for your opinion, but it does help other people It’s a little guidelines or tips for people who actually know how install radios and understand the basic for install
@@jayheritageclub7852 it definitly helped me to get some guidline. this this better then nothing and there are guide videos thats are far worser than this