most powerful ESP32S3 relay board for home assistant - KinCony A32 Pro
HTML-код
- Опубликовано: 16 апр 2024
- KinCony A32 Pro ESP32 relay board based on ESP32-S3-WROOM-1U (N16R8) wifi chip, it have 32 manual control switch buttons can turn ON/OFF relay even if system is broken. Support 32 channel relay output and 2 channel dc 0-10v dimmer output, 2 channel 1-wire GPIOs, 4 channel analog input ports. It support 4G module (SIM7600 series) for SMS, voice call, GPRS communication for Tuya mobile application. SIM7600 module also support GPS, just need connect IPEX extender GPS antena. Download KCS firmware , use SMS or call to turn ON/OFF relay will be very easy for home automation DIY. LCD display will show wifi and ethernet IP address and 4G connection state and Tuya connection state. You can write any code by Arduino IDE / MicroPython / ESP-IDF development tool to ESP32 module. We will supply arduino demo code for different samples. Everyone can modify and change the code for your own smart home automation system project. it support use by ESPHome for home assistant or tasmota firmware.
alibaba order link:
www.alibaba.com/product-detai...
aliexpress order link:
www.aliexpress.com/item/32568...
visit for more:
KinCony's website: www.kincony.com
Aliexpress Online Store: kincony.aliexpress.com
Facebook: / kincony.smarthome
Twitter: / kincony - Хобби
You make the best products ! Congratulations on your work and on keeping designs available, and so detail documentation. Congratulations 🎉
thank you.
Amazing design and open source 👏 more companies should be like this
thanks
Perfect processing and design. You certainly put a lot of work into it. Super manageable alternative to mainstream IOT systems which are much more expensive and less manageable. Great work
thanks
Really...one of the best companies with all explanations, demos, codes, tutorials etc... transparent and explanied. You mentioned here in video that you will be doing integrayion with home server. I havent seen that :)
do you means how to use for home assistant by ESPHome?
so happy as kincony fan...
Congratulations on your work ❤
thanks
I just bought it.. will try it ASAP
thanks
KinCony fan ❤
still not used your products 😢
Gratulations this looks great
thanks
Nice work!
Your design will ignore relay state from controller if some switch is toggled? Is force off possible?
I have similar design with manual switches for relays but I use three state ones. This way I can either force on, force off, or set to controller state.
For example, I need to check my lightbulb, so I force off one line and I am assured that no automation will power it while I am in contact with wires. After repairs I toggle auto mode back and any state from controller will be applied back.
Another use case is controller problem while I need some light somewhere. Then I force on required line and the controller can not switch it off until I allow it manually.
toggle switch control relay's COIN voltage.
Can you make a video with an example use case like turning on some lights or something so we can also see a wiring example and also how to set up light switches in esphome?
ok, when have free time, can make the new video.
I like your products, I have Clipsal C-bus system , do you have any products that will interface with the Clipsal C-bus system, or have you thought about doing anything in the near future ? Thanks.
what's "C-bus"? now controller support MQTT, HTTP, modubs multi protocol, if your system support it, it can be integrated.
@@KinCony en.wikipedia.org/wiki/C-Bus_(protocol)
Looks like a good product. Price seems steep. Did not see amps per channel in the specs.
every relay MAX for AC230v 7A load, INPUT port use dry contact signal
Wow...Feeling happy as a kincony fan. it is a milestone product...i have come queries
1) can I use 1sqmm. copper cable or aluminum cable for DIs. how much distance i can go.
2) can i able to run kcs and tuya and HA software at same time simultaneously,
3) it will if i turn on relay 1 in kcs it will update the state in both tuya and HA.
also vice-versa??
1. it's ok, 300 meter is no problem, i think 500 meter is also ok. just tested 300 meter.
2. ok, no problem.
3. yes, all app will update relay state.
Thats Great...❤️
but we have one esp32 in this board. how can i able to run KCS firmware and esp32 for home assistant at the same time...?
If i understand correcly basicly digital input is switch on/off and when its pressed ON you enable digital out that sipits out 12v? and with that 12v you control fuse that goes on off based on 12v input?
digital output is relay dry contact output, you can connect with any voltage. INPUT also is dry contact signal , use 0v for trigger, 12V or "not connected" = untrigger.
this video have re uploaded, today's first video's audio error, thanks for our fans feedback ,so that we can fix it re uploaded the video.
Hi… Can I connect KC868-COLB to this board?
Because I've the old setup of Kc868-H32BS connected by RS232 to COLB
COLB support IFTTT by HTTP command, you can let COLB work with A32 Pro by HTTP.
If i want to use your product do i have to replace the light button the i am useing
just use by push button: momentary switch panel.
Is it possible to have the switch work even in case you lose ethernet conectivity in 31:00 example? Probably by editing the yaml file?
With ESP Home you can do that yes
sure ,you can edit by ESPHome to set which relay for work, it work locally, without network.
This device support tasmota or esphome?
support ESPHome for home assistant.
How to have your product in Burkina Faso ?
we only send from China
Sir esp32 getting stuck when 3 phase contactor getting off .so can u provide any solution to the problem to avoid device stuck
can you tell me details, or can you take a video of your problem, send to our whatsapp
@@KinCony ok
But do you need raspberry pi or
Raspberry pi is already installed
Pi not included, if you want work Pi, need another Pi server. if you want to use tuya app, it can directly to use. But we have another product Pi+relay = one board.
@@KinCony what is that product
Can you install pi on A32