Way back in 1990 when I was a young fella I wasn't a big fan of rotary's until I went for a ride in a 13B Bridge Ported RX2 Capella... Instantly hooked. I just had to own one. Currently and have owned Rotaries in the past 25 years. I'm a big fan of the 15 / 16 inch deep dish b45 old school Simmons. Hats off to this bloke , nice build love the N/A 👍🏼
Had some friends in the 1990,s that owned an rx3 coupe, went overboard with modifying roll cage and all , were that crazed with it they would get a tune up every week , ended up selling was sending them broke. 3 brothers .
If Mazda was smart they would bring back the RX3 SP give it some of that retro feel and some of that retro look it would be a very successful car but sometimes Corporate executives never get it. Most of the young people of today if you tell him about the RX3 SP They have no clue what you’re talking about and then when you show them the pictures they fall in love with it instantly
This has turned into my favorite channel! Subbed yesterday and appreciate the car culture here and around the world. Love from South Carolina in the US! 👊🏽💪🏽
Very nice car. Not a fan of the Simmons. Would look alot nicer with a classic Japanese wheel with a smaller diameter. I don't understand why everyone puts huge Simmons on these cars.
Awesome car mate, well done. One thing bothers me since I can't see any air filters on those ram tubes 🤔 I hope something is not swallowed or it will be bye bye apex seals and engine ☹
At this point it's academic. What's missing other than a few pieces of trim and for the trainspotters, the chassis number? Once you get to this level of modification, it is not strictly speaking either, but a 'Ship of Theseus'.
Great car, So clean, I had the same 808 turned into a RX3 and exact same colour but it had a Z18 Nissan 4 cylinder engine worked and engineered, This brings back memory's from early 2000s. Btw the way the car sounds so perfect, Great Job
It's good but with a bit more attention to detail , it could be even better. For instance, they could have taken the door trims right to the top of the door to cover the metal, and put the little RX3 Meccano set numberplate frame behind the numberplate.
Part 2 we will meet him at a race track & can promise you limiter bashing for dayzzzzzz! On the street we keep it legal. Aussie cops have no chill. If you’re looking for NA 13b on the limiter check out “holden gemini 13b” 11,000 rpm all day long. ✌️
He’s actually changed them as well as bolting on a massive turbo 😉 here’s an updated episode ruclips.net/video/oROD1vh9i0s/видео.html Thanks for watching mate
Way back in 1990 when I was a young fella I wasn't a big fan of rotary's until I went for a ride in a 13B Bridge Ported RX2 Capella... Instantly hooked. I just had to own one. Currently and have owned Rotaries in the past 25 years. I'm a big fan of the 15 / 16 inch deep dish b45 old school Simmons. Hats off to this bloke , nice build love the N/A 👍🏼
Would you say they are reliable
Had some friends in the 1990,s that owned an rx3 coupe, went overboard with modifying roll cage and all , were that crazed with it they would get a tune up every week , ended up selling was sending them broke. 3 brothers .
Saw this Car Down at Eastern Creek on Wednesday absolute beast
Another fully sick GrassRoots Garage video. Cheers from Perth. 👍
Thanks mate!!!!
If Mazda was smart they would bring back the RX3 SP give it some of that retro feel and some of that retro look it would be a very successful car but sometimes Corporate executives never get it. Most of the young people of today if you tell him about the RX3 SP They have no clue what you’re talking about and then when you show them the pictures they fall in love with it instantly
Wanted something different but puts fr simmons on it 🤔
wanted FR's *but not polished or painted*
hope that helps ✌️
FR's are just such an epic wheel they are perfect on so many cars. 👍
@@blueballsmcgee1696 lol love the analogy
Agreed they are a common wheel,
still love them but
Cheers
Pete
I hate FR Simmons on rotary's, But to each their own. Wish someone would put a fat set of Watanabe's on an RX-3 for a change.
@@gav240z fuck yes and no bigger than 16s or 17s
He was obviously talking about the finish of the rims, not the rims themselves... 🤔
Can't Go Wrong With The Old Rotary Mazda's Absolutey Great Cars
This has turned into my favorite channel! Subbed yesterday and appreciate the car culture here and around the world. Love from South Carolina in the US! 👊🏽💪🏽
Thanks so much for the support mate!!!
We really appreciate it!!
Ryan and Pete
This Habibi has lots of friends
Habibi? This weak af smart ass comment that's why you got no friends
@@SamiAmone11 does, This lebo has lots of friends sound better too you? lmao....
@@markc1456 why you hurt cunts gotta bring up race ? if he was a white dude would you call him a convict
My daughters name is savanna named after this beautiful machine 😍
Nice work mate!!!
Very nice car. Not a fan of the Simmons. Would look alot nicer with a classic Japanese wheel with a smaller diameter. I don't understand why everyone puts huge Simmons on these cars.
Sydney thing
We love it... but we're from Sydney
I'm not a fan of big modern wheels on older classic cars but I guess you can fit the bigger discs/ rotors in there.
I like the wheel just not the size or colour. Magic car non the less👍
All those RX series cars all ways goes well with Simmons wheels. Old school style from early 90s
I agree & would perfer chromed hubcaps to these oversized wheels that ruin the look & ratio!
Damn this is clean, one day i will own one 🙌🏽
Hey Pete. Mo is the same guy that painted the Escort I'm working on. Great guy and great painter
Awesome thanks
Nice work on you Mazda my favorite
That built its awesome! Sick! Marvelous! Epic!
Sure is!! The owner did an awesome job!
Thanks for watching
Pete and Ryan
Always and Anytime!
What’s up with aussies and big wheels? Can’t beat some 16 by 10s slammed on its guts.nz style
Awesome car mate, well done. One thing bothers me since I can't see any air filters on those ram tubes 🤔
I hope something is not swallowed or it will be bye bye apex seals and engine ☹
More flow
Do those door locks have little rotors on them? Lol the little detail make such a huge difference
Sure do! Yep agreed love the small details 👌👌
Mazda RX 3 SP is what I would like to have
When are people
Gonna start calling them for what they are.
If it started as an 808, it’s always gonna be an 808
At this point it's academic. What's missing other than a few pieces of trim and for the trainspotters, the chassis number? Once you get to this level of modification, it is not strictly speaking either, but a 'Ship of Theseus'.
Sweet ride mate 👌
I want one asap but need to wait till i have a more reliable car
You'll need a reliable car. You will be busy rebuilding the rotary all the time hahaha
Wow. Australia has a lot of rx3 savannas
The car looks good. But those wheels are too big. 15 inch wheels would look a lot better.
Love the dash.
I want to know this guys friends
Fully sick bro
NA Rotors for a change :)
Epic setup.. Nice
sweet car
Looks perfect, but those wheels, paint them to match the car maybe
Great car, So clean, I had the same 808 turned into a RX3 and exact same colour but it had a Z18 Nissan 4 cylinder engine worked and engineered, This brings back memory's from early 2000s. Btw the way the car sounds so perfect, Great Job
I love r
13bs
we do too!
Oh yes !!!
Where is this Mayda Mawn guy? He builds a nice engine.
Nice 💪💯💪 video
Thanks for watching mate
It's good but with a bit more attention to detail , it could be even better. For instance, they could have taken the door trims right to the top of the door to cover the metal, and put the little RX3 Meccano set numberplate frame behind the numberplate.
Thanks for your opinion mate and watching 😌the ep. GRG think’s he’s done an absolutely epic job on this car and stayed true to his build 👌🏻👌🏻💪
@@GrassRootsGarage Apparently this car was renovated by VIS with a black and gold theme. Check their Facebook page. Any chance of an update video?
@@brettonwoods9856 We just dropped an ep for you mate 👌
Where’s the suspension cover from
Gtr throttle plates. Interesting,
Fresh af!
💯
Waited the hole clip for him to send it! But he didnt even hit limiter 😑 my 12a na banged harder
Part 2 we will meet him at a race track & can promise you limiter bashing for dayzzzzzz!
On the street we keep it legal. Aussie cops have no chill.
If you’re looking for NA 13b on the limiter check out “holden gemini 13b” 11,000 rpm all day long. ✌️
GrassRoots Garage your not wrong! Unless you hide the number plate & blur the driver it’s not worth it!
GrassRoots Garage q
Nice car what type of rwhp does the car make?
めちゃくちゃカッコいい！！
...ホイール以外は(小声)
nice cruiser :) yeh an FATRX3 is fucking awesome :)
Smick looking mazda
Sure is mate!!! Thanks for watching
Nice
Mashalla This is my dream car
8:32 you could never do that in a Bridgeport with a Weber
You can
@@peter12266 bro maybe in a bitch port
The old pay every other dude to build it buzz.
Nice car but why call it an rx3 when it's an 808
How many intake ports does a 13B have?
4, 2 primary/2 secondary
I can pretty much do just about anything to own that car
Must have accessory for your 13B is a beard.....
does ziggy respect everyone idividualy?
1badd ass right hand drive.👍California.
#HELLYEAHS #dopeAF
Nice car but geez the wheels are hideous
Shu kuzzzz hektic rotor
no 10
Very layed back kinda bloke
ホイールメチャダサい！
もったいねー
Lost me at bigger rims and tubbed..roller skate coming out soon.
Im in the wrong business, where so these kids get all there. Pney from🤔🤢😂😂😂😂
wheels😩
Nice car.. don't like the colour of the rims
He’s actually changed them as well as bolting on a massive turbo 😉 here’s an updated episode
ruclips.net/video/oROD1vh9i0s/видео.html
Thanks for watching mate
Grassroots garage thanks for the update 👍
Awkward...
?
Shes a beauty. Only thing i hate is the front number plate not slightly bent so its parallel with the savanna nose
Tough crowd! Just joking mate. Thanks for watching 👍🏻