Respironics 450P REMstar Pro Series C-Flex + w/humidifier & SD card, Easy Life Nasal Mask

Chris Rose, Manufacturers Rep, from Philips Respironics, talks about the 450P REMstar Pro Series CPAP as well as the Easy Life Nasal Mask. This video is brought to you by The CPAP Clinic at ProTech. For more info or to order this machine, contact our respiratory team 1-800-722-7313. www.protechdelivers.com

[@tyamada21]

I purchased this model from Remstar Respshop about 4 years ago. They shipped it to me in Australia within a week and it has worked perfectly ever since. I therefore highly recommend both Remstar Repshop and this model.

[@cplively]

I've got 957 days with >4 hours of use for a total of 7,446 hours of therapy on this machine. It's been awesome so far.

[@kitezen]

is there a video which shows how to set the machine?

[@thdman15111]

I have this model, and use a full face mask. My pressure setting has been set to 16.5 as my sleep apnea is severe. I have been using a mirage II full face mask, after a while I could not tolerate the face mask and change my mask to the Resmed Airfit F10 Medium. If was fine for a while, but after I had some teeth removed, I found that I could not tolerate the pressure and the mask would not fit properly. What would you suggest I should do, and how would I reduce the pressure or would I need to have my sleep apnea re-assessed, to find the proper pressure.

[@00DirectorsCut00]

How many days to full the sd card? Thank you

[@grettagrids]

the humidifier on my bipap only blows COLD :( perhaps the heater isn't set right

[@MikeSteinSeaTac]

How long have you had it in use before it died?

[@matchking300]

How do you set the CPAP pressure!!??

[@JSimmsfun]

But how do you clean the humidifier?

[@michaelolson1421]

Remove the rubber parts and run it through dishwasher, top rack, not heated dry.

[@richardwarries581]

make it open you will see it is not much inside yust a air blower cut the cable and buy a blower on line and replace it it is stupit easy

[@iamkoza]

mine has just died, not happy about it either.... this thing cost $3k

[@leventkocatepe2947]

Teknik destek veren ?

[@dianereczek499]

9

[@Bettsie1]

NOT easy to wear.

[@theman6785]

HORROR SHOW WITH HAZARDOUS FOAM!! DISGRACE!!!

[@bobgardner5192]

REMstar Pro C-Flex + is not on the Philips recall list. I double checked today Aug 21, 2022.