FIX HACK DIY : Preventing Yellow Flames (Gas Stove Series 3/3)
HTML-код
- Опубликовано: 22 июл 2024
- Part 3/3 of Gas Stove FIX HACK DIY Series.
Find out how and where to tune the air inlet for the gas and air mixture for gas stove. Yellow flames are caused by improper mixture of Air and Gas (Butane, Propane). Some stove have tuning valves or air inlet openings that can be adjusted.
Learn how to diagnose common kitchen / household or even Campervan or Caravan. This is a 3 part video series, watch the other videos in this series on DIY Gas Stove
FIX HACK DIY : Gas Stove Battery Change for Electronic Fire Starter (Gas Stove Series 1/3)
• FIX HACK DIY : Gas Sto...
FIX HACK DIY : Fix Broken Fire Starter / Igniter (Gas Stove Series 2/3)
• FIX HACK DIY : Fix Bro...
FIX HACK DIY : Preventing Yellow Flames (Gas Stove Series 3/3)
• FIX HACK DIY : Prevent...
#repair #fix #stove #gasstove #diy #fixhackdiy
My heartfelt Appreciation & Gratitude for your educational video on this topic 🙏
We have been using different types of gas stoves for the past 5 years and each time the flame turned yellow, I tried looking for service/repair but no one seems to be interested. We finally invested in Rinnai double gas stove (supposedly a very reliable brand) but the same problem occurred after around 1 year. The thought of changing another gas stove (costing a couple of hundred RM) can be a pinch in the wallet!
We had tried adjusting the air-flow valve but to no avail. Today after watching your video, I was determined to give it one last try before purchasing another unit.
I tried cleaning the air-flow steel conduit but still uneventful result. So, my last resort, I flushed it with water (after noticing there was an open outlet).... the water discharged was slightly brownish, and after another 2 rounds of flushing... the discharge was clear. Then, Voila!.... the flame returned to normal blue, without yellow flames!
Thank YOU once again for helping us SAVE money and educating us on DIY matters 👍
Thanks Mr. Johnson Lam for your patience in answering my questions when we met in Mr. DIY at Mid Valley. You are so patient, professional and friendly. I can now DIY my stove and Aircond cleaning in minutes 😊
It worked perfectly well. Thank you so much. I was so worried for the flame.
Thank you so much for sharing. Much appreciated. I have tried this on my two plate gas burner which had a yellow flame and after adjusting it gave a beautiful blue flame again.
This is what I’m looking for. Clear and informative. 🙏 thanks
Thanks, this will help me to adjust my wifes simple gas burner. Now I understand the basics about gas burner.
Glad to help
After following your video guide, found the air adjuster and adjusted the flame. Say bye bye to black bottom pots and noticing that soup boils slightly faster. I guess it is much more efficient now.
This was super helpful. Thank you!
Thank you so much for this info. Very helpful!❤
I am off to do some adjustment….thank you for the tip.
This is so cool! Thanks this really helped!
Thank you so much for the help and knowledge 😘
Thanks man!!
Thank you for this good video
Thank you, will try it.
RUclips.... Priceless! Thank you so much!
Thank You!
Yellow is unburned gas because of not enough air. Needing a cleaning/spider webs can cause this low air mixing in the piping so maybe clean first before adjusting a previously adjusted unit. Jumping off the burner or blowing out blue flames is too much gas.
Thank you so very much
very helpfull .Thank you
Thanks brother
Thank you so much. Very very helpful
Happy that this helped :)
Gigantic thanks Sir 😊
thanks
Super helpful. Thank you! 😊
Glad it was helpful!
Hi, I'm from the UK; my gas hob is burning with the correct blue flame, but tonight it started to have an unusual smell. (It is Not rotten eggs) It is like it was burning a more crude type of gas...all four burners are the same. Have you any suggestions ? Thanks.
I find your videos very useful tnx..im your new follower
I bought a brilliant cooker I like it because I can sit a wok in it and it has large and single burning flames I already took the first one back because when I turn it on the flames comes out on the each side. Big flames. How can I disconnect the igniter so as to only use lighter or matches.
And it's called Light duty gas stove like those of catering companies use
And our gas stove is burning yellow and stooing and leaving black marks from the pots and else wear
Is any way to clean up this
What if my gas stove is a simple model that doesn't have those adjusting levers?
Exactly my thoughts
Is it a good idea to turn the air hole fully open?
Hello I got a GE is any one know how do I fixed the yellow burned my stove doesn't have does any help please
Hi. Good and simple video to understand. Thanks. I tried to adjust the lever. But all 4 adjustment probes are not moveable at all. Do I need to use tools or try spraying WD40 assuming it’s stuck?
Yes.. probably stuck because of rust or gunk. WD40 is safe.
also my inner burner is low flame, i need to kipas abit to make outer burner light up
most stoves dont have the air adjust lever like shown. I have never seen a stove with air lever like that in the last 3 sets of stove I overhauled
Probably you are from a country with stable gas. These valves are useful for country with inconsistent quality of gas, gas pressure etc.
How do you adjust burner flame
Hey, I have tried this but there is still yellow flame in only on one part. How do I solve this?
my guy ive been searching this type of guide all over the internet, all stove is like American one
hi..by any chance do u know where is the lever for bosch stove? can't seem to locate it.
We are not familiar with Bosch stove. Some stove has a small mixer inside the burner itself. Best to check with manufacturer website or owners manual.
My problem is , if I open one , the other side pressure gets low or worse it’ll cut off . Its like the gas pressure is low is both are on . How do I fix this
Question sir. My gas stove seems like its making letup letup sound... and the fire just get stronger. Any recommendations fix ? Sounds like moto ekzos letup but not as loud la of coz
Seems like the air to fuel mixture is inconsistent. Try give all the parts some cleaning.
You can also upload a short video of the issue to out Facebook Group "KakiRepair by KakiDIY", we will help you to diagnose there
Soaking the burner in caustic soda for a few hours resolved the letup letup issue.
My bottom burner is no producing any fire.
When i fire off, top burner will spark n burn. When i use bigger flame, bottom burner will produce short yellow fire then died off. But i still can hear gas is coming out.
Hi I have Samsung NX60T8111SS model and has serious orange flame coming out I tried look for adjustment in the back but this model doesn’t have I don’t know where is located is ?
Try this video to find the gas nozzle to be cleaned.
ruclips.net/video/C7w3f83pEOI/видео.html
Mine doesn't have this setup
Great video. Could you advise us the brand of the gas stove you are using ?😊
😂
the other side of my stove works as i tune it as you suggested. but the other side doesnt. i dont know whats going on. please help me
At times is because the tuning valve itself already spoiled ..
0:52 very helpful
Thank You!
mantap
Hi, what if it's the middle small burner for a 3 burner stove? It doesn't have those adjustment levers
Yeah. Sadly some stove can’t. Or some are via adjustment nuts inside the burners. E.g. Electrolux ones, it’s on their user manual
Then check for dirt in the pores.
Some holes on the burner are probably clogged.
is this adjustment also in outdoor stand alone stoves?
Sadly. Most of those are fixed
My rinnai stove model is RB-2myg n the fire is orange, cant seem to fix it, pls help
Try this video.. hope it helps. ruclips.net/video/C7w3f83pEOI/видео.html
Can we learn how to remove a stuck gas burner base and fire cover?
Try this video : ruclips.net/video/C7w3f83pEOI/видео.html
I've got an old gas stove which doesn't have any switches or controls but it's usually switche on control the heat on how high or low you want 🤔
It's just ab old gas stove with bars and stove and gas pipe I don't know if you heard of this one before
My gas stove does not have this adjustability as with the majority of gas stoves so completely irrelevant.
Try this for those without adjustment levers.
ruclips.net/video/C7w3f83pEOI/видео.html
did you say the the adjustments are UNDER the stove?
yeah. but sadly not all models have them
Satu tungku tidak menyala merk niko reflesion phantom tanpa pematik ❤🙏
Is yellow flame more or less oxygen?
It's inbalanced mixture of air and fuel.
A gas stove with a rubber pipe and an improvised fitting inside that rubber pipe to make it fit on to an fitting that is then clamped on with a hose clamp?? Seriously first of all those clamps are not safe as they break. Second a rubber pipe that can melt? And on top of that another rubber hose to make that outside hose smaller to it fits onto an fitting? Maybe u should make a video on this one and how unsafe it is to do this kind of thing.
Those were standard gas hose and the clamp and connector came with the stove.
Unless you are saying the stove manufacturer should not Include them in the first place
Tarak jumpa pun
Omg to late I threw mine😢
YA!SO COOL!BUT 1 CYLINDER OF GAS CAN DISTROY A 7 FLOOR BUILDING! SO CALL A TECHNICIAN!
'Gas Stove' can mean any 'gas stove' . Most don't have adjustments!
Sorry for the term. Try this video to clean the gas nozzle, blocked nozzle can cause yellow flames too.
ruclips.net/video/C7w3f83pEOI/видео.html
@@KakiDIY Thanks very much, I didn't realize the nozzle could be unscrewed.
Why do you love comments and not reply?
The majority of stoves don't have those levers,make a proper video.
this is how to make carbon-monoxide! you should never mess around like this guys doing.you need special tools to set things like this up.