i have one question Salman, here on this video you show how to connect just open and close wires, but what abouth, blinkers wires, horn wires, closing power windows and unlocking hte boot (the fifth door)?
Thanks for help.it really worked. It would be nice if u could also explain how to connect the windows openning (when u keep the lock button pressed windows closes)and light signals when u lock and unlock the car.
cool video I managed to connect the lights and trunk. I'm just wondering which pin do you connect the yellow wire for the windows? can't seem to find the wiring diagram anywhere. thanks man :)
thank you very much , i search for you case but at the moment i couldn't find helpful thing , but in the case of the light you can check one wire by wire , start with giving them negative trigger , by using a tool like a tester with needle head connect one end on the car ground and the other end with the needle head try to press the needle head on the wire to fine the lighting wire , note ;;;; that only signal light is on the central lock socket . if you didnt find it try with positive trigger , which you connect the one end in positive
hello. what are the colors of pin 4 and 24? its hard to understand from video, i think you said blue-red for pin 4 and gray-red for pin 24, but i'm not 100% sure if i'm right. Thank U!
i have different type of vw. The thing that raises and goes down when you open and close the door has a rubber simmilar to the one the wire you pull to open the door at you and it is broken. Do you thing its a good thing to change it or it doesnt matter? yours its bigger and better build
Fleky Flek hi dear , iam not sure ,but you can open the door panel and see as well as , try to give the pin 4 and 24 a negtive puls so you will be sure that it is same if not , contact in my Instagram so i will check the wiring digram
hi mate, do u know the original wiring, is it the same in hyundai i10, i.e., 4, 24? how can i test the lock and unlock? did u put the order end of the tester to the negative, that is where did u connect the black, white and white/black cables to? thanks
Salman, u used 2 yellows 1 red 2 white ones together with the black for the ground. Is that in the same bunch of leads possible to connect the lights front and rear and also the boot working as well. thanks.
Hello Salman, i ve one question. I ve 2008 kia ceed and i want to ask you , do you know which kable colour is open and which is closed.thanks and good days.
i have one question, how you connect the two braun wires (number 11 and 12) to the turn signal so, when you lock and unlock the turn signals all 4 of them light up shortly? and also how you connect wire number 10 with pink colour for beeping signal acctually with horn?
Hello..!! Nice Video. What about the turning lights when locking and unlocking..?? It is essential in order to see from a distance if your car is locked or unlocked. Many thanks..!!!
Thank you for your quick response. If you could tell me where I could search and find an input for triggering the turning lights, I could also look help you with this. I owe a SKODA FABIA 2001 with built in central lock but not a keyless one. The drivers door is very similar to the one you work with in this video.
Help: The yellow wire with which wire connect it? And the yellow / black wire? Tell me the colors I'm not very experienced .... Does this kind of central unit also close the windows?
Salman Almahal thank you very much bro! I really appreciate your time in putting this video here and answering people questions , it's very kind of of you . by the way اني عربي مثلك 😊 تحياتي لك يا طيب !
hey man, nice video but im really frustrated. i have a volvo 440 and i dont know what to do. i have a unit with the same wiring diagram. i dont know where to hook it up. i dont know anything......
hi any one help me to install the same on SEAT CORDOBA 6K2 ... central confort unit is behind the instrument cluster, i dont have any idea for the connections.
The colouring in my connector is different: pin 4 is green/red and pin 24 is blue / yellow. After connecting this, the unlock works, but the lock does not work. Any idea's? Thnx.
hi sorry for the late replay, you have one option to find the locking wire , the option is .... to use any wire one end on the car ground and the other end with needle head , then try to put the needle head to all the wire in the central lock wire , needle head can be as tester as i use . so when you reach the correct wire you will see the car locking .
Hello and congratulations for the tutorial! I recently bought the same product but I can't find the wiring diagram to connect it... Can you tell me where to find the wiring diagram of a Seat Cordoba 2008? Thanks
I just finished hooking a remote system up to my Golf mk4, but it doesn't work to lock it. You can hear the trigger going off and all, but nothing happens. All the wires are hooked up corretctly too. Anyone have any idea how to fix that?
hi have you doing? i am going buy a remote star car remote and i wonder if we can make a deal like you guide step by step how to do it ... and I would pay you. while i learn somenthig you,ll get some money. think about it thank you
one in pin 4 and the other in pin 24 , in the connector there are number , if you find the pins give them negative pulse so you will know which one lock and which one unlock . negative pulse mean you take a wire and connect one to the ground of the car and the other one to the wire which pin 4 and 24 is connected to . the connector should be fixed to the unit , you can do that either you scratch the wire or connect the negative wire with a needle and press the needle to the wire .
thank you so much for this video. i havent found one video in german language which was so good as yours. thank you thank you thank you
Thanks ,it works for VW PASSAT year 2000 too. Keep up the good work. Subscribed
Enjoy dear :)😀
Thanks , i fix my car in 10 min after i saw your video l!
Λεοναρντ Τζαφαι thank you for this nice comment
you are the best I followed your steps and I did it myself! 4 24! ;)
do you know who fix the windows line?
i have one question Salman, here on this video you show how to connect just open and close wires, but what abouth, blinkers wires, horn wires, closing power windows and unlocking hte boot (the fifth door)?
Thanks for help.it really worked. It would be nice if u could also explain how to connect the windows openning (when u keep the lock button pressed windows closes)and light signals when u lock and unlock the car.
Bucataru Bogdan Puiu 0034632656303
cool video I managed to connect the lights and trunk. I'm just wondering which pin do you connect the yellow wire for the windows? can't seem to find the wiring diagram anywhere. thanks man :)
thank you very much , i search for you case but at the moment i couldn't find helpful thing , but in the case of the light you can check one wire by wire , start with giving them negative trigger , by using a tool like a tester with needle head connect one end on the car ground and the other end with the needle head try to press the needle head on the wire to fine the lighting wire , note ;;;; that only signal light is on the central lock socket .
if you didnt find it try with positive trigger , which you connect the one end in positive
thank you very much ,everything works,good job!!!!!
Very clever...thks Salman.
Welcome dear
Thank you Sir... It was really help me to install...
Still great and helpful, thanks a lot.
Does it connect to central locking button
Good day sir your viddeo was so helpfull thank you
You are very welcome
hello. what are the colors of pin 4 and 24? its hard to understand from video, i think you said blue-red for pin 4 and gray-red for pin 24, but i'm not 100% sure if i'm right. Thank U!
Thank you. You helped alot.
I installed the system in same way as you and it works, but now my windows dont work. Any ideas ?
i have different type of vw. The thing that raises and goes down when you open and close the door has a rubber simmilar to the one the wire you pull to open the door at you and it is broken. Do you thing its a good thing to change it or it doesnt matter? yours its bigger and better build
Hello, your instructions are perfect but Id like to know if it is gona work on Passat b5 as well ??
Fleky Flek hi dear , iam not sure ,but you can open the door panel and see as well as , try to give the pin 4 and 24 a negtive puls so you will be sure that it is same if not , contact in my Instagram so i will check the wiring digram
it works i already did
hi mate, do u know the original wiring, is it the same in hyundai i10, i.e., 4, 24? how can i test the lock and unlock? did u put the order end of the tester to the negative, that is where did u connect the black, white and white/black cables to?
thanks
Salman, u used 2 yellows 1 red 2 white ones together with the black for the ground. Is that in the same bunch of leads possible to connect the lights front and rear and also the boot working as well.
thanks.
you mean so that the signal light will flash ??
Yes i mean that. Thanks
Hello Salman, i ve one question. I ve 2008 kia ceed and i want to ask you , do you know which kable colour is open and which is closed.thanks and good days.
Thanks for the video. Helpful.
Hi excuse me, the yellow line you plug on which line in the pin? What color? And the black yellow line on which file what color stp
Great video! I think i will do this to my car aswell!
Hi bro, can u maybe help me?
I would to install an central lock with keyless on my Audi A3 from 1996 8L.
kerlos alaboshe hi bro yes I can , sorry for the late reply. do you still need the help
when you unlock or lock it manually does the other door automatically locks or unlock??
Will it works on Passat B5.5 2000 ? I have Bene 302 keyless entry System .
Sir is that thing at 2.04 come factory fittedin all cars particularly in Hyundai i20??
How is to skoda fabia...
If tou can help me....
Please.... Thanks
can i move windows and sunroof when holding button?
i have one question, how you connect the two braun wires (number 11 and 12) to the turn signal so, when you lock and unlock the turn signals all 4 of them light up shortly? and also how you connect wire number 10 with pink colour for beeping signal acctually with horn?
Also I would like to know how to fix the signal lights to be blink when the remote functions? Thank you Sir
Great video. Where is the center lock in a Peugeot 306 please.
Hello..!! Nice Video. What about the turning lights when locking and unlocking..?? It is essential in order to see from a distance if your car is locked or unlocked. Many thanks..!!!
Emmanouil Chatzisavvas hi i will upload video soon about doing that , thank you very much for the comment
Thank you for your quick response. If you could tell me where I could search and find an input for triggering the turning lights, I could also look help you with this. I owe a SKODA FABIA 2001 with built in central lock but not a keyless one. The drivers door is very similar to the one you work with in this video.
What is it you use to give the negative pulse please? Is this necessary to check during the process? Thanks
I was giving the negative pulse using a test lamp , I connected to the car ground , my test lamp has a needle in the front so i press it the wire .
also for VW Lupo?
basically I like to know if the wiring work is only at the door ? so then I can think if I can do it my self . thanks.
Very cool, but i don't now the color to locked.. you ken help me? Thanks
Help bro q color del arnes agarras para cerrar y abrir arnes del auto
Hi i got polo 2009 i follow yr ins truction cant find unlocking wire can i help please.
Help: The yellow wire with which wire connect it? And the yellow / black wire? Tell me the colors I'm not very experienced .... Does this kind of central unit also close the windows?
Soldering iron and heatshrink would make for a more professional installation
I want to uninstall my keyless alarm do I have to reverse the installation... thank you
hi bro can you please tell me is all this work only at the door ? no need to go for power direct from the battery?
b S! hi , yes all the work is on the door no need to go any where dear .
Salman Almahal thank you very much bro! I really appreciate your time in putting this video here and answering people questions , it's very kind of of you . by the way اني عربي مثلك 😊 تحياتي لك يا طيب !
العفو وحياك الله --من وين الاخ ؟
Salman Almahal اني من العراق بغداد لكن مقيم في بريطانية حالياً . حياك الله يا طيب!
Do you know how to wire raising window up output from this unit in the car?
Did you found the way? Searching for it right now
can i do the same for audi a3 coupe 98 ?
hey man, nice video but im really frustrated. i have a volvo 440 and i dont know what to do. i have a unit with the same wiring diagram. i dont know where to hook it up. i dont know anything......
4 what are those fuse ?? Can that be reason my flashing lights not flashing anymore Blown fuse ?
Can you tell me why my pilot door doesn't work? All rest are working but the driver's door doesn't Block or unblock
What is the trigaring of polo pls answer
I cant find the central locking thing, is it on passanger side??
How to contact positive pulse ❤
i dont have electric windows what unit and where i can plug after markey key less entry sistem
Passat b 5 1998 is similar to golf 4
And what pin is used to only unlock the boot?
I cannot see the color in the cars the yellow/ black on the green yellow and the yellow in....?? Please help me i dont hace instagram im french sorry
Hi I have a question all the system works but only when my door is open can you help me with my problem please
I had the same problem, take the ground from somewhere else than the door bolt.
Thanks for the video
hi any one help me to install the same on SEAT CORDOBA 6K2 ... central confort unit is behind the instrument cluster, i dont have any idea for the connections.
The colouring in my connector is different: pin 4 is green/red and pin 24 is blue / yellow. After connecting this, the unlock works, but the lock does not work. Any idea's? Thnx.
hi sorry for the late replay, you have one option to find the locking wire , the option is .... to use any wire one end on the car ground and the other end with needle head , then try to put the needle head to all the wire in the central lock wire , needle head can be as tester as i use . so when you reach the correct wire you will see the car locking .
Did you manage to find out which was the correct pin? Im having the same problem as you. And als ok have the same colour wires.
Did you found it?
Hello and congratulations for the tutorial! I recently bought the same product but I can't find the wiring diagram to connect it... Can you tell me where to find the wiring diagram of a Seat Cordoba 2008? Thanks
Hi, I have doe all the same as you, but it just unklocks, does not lock
Hi peter , did you try to give pin 4 and 24 directly negative pulse ?
+Salman Almahal Thanks, I have solved the problem.
+Peter Key what was it ??
Hi Peter, I'm running into the same problem now, it unlucks but does not lock. How did you solve this? Thnx for you reply. Jan.
Peter Key how did you fix this? im having same issue..
Help me pls :(
Yellow, yellow/black connent to?? What wire?
Bence Bors brother can you tell me in which minutes you have the problem
Salman Almahal A bowl opening and closing button does it. Who opens the door. But I can not close it.
I just finished hooking a remote system up to my Golf mk4, but it doesn't work to lock it. You can hear the trigger going off and all, but nothing happens. All the wires are hooked up corretctly too. Anyone have any idea how to fix that?
hi have you doing? i am going buy a remote star car remote and i wonder if we can make a deal like you guide step by step how to do it ... and I would pay you. while i learn somenthig you,ll get some money. think about it thank you
i tried for my Kia Cerato but couldn't work, please help.
ciao ma. di che colore sono l'apertura e chiusura o provato forse sbaglio fili
can someone help; i dont uderstand where i have to connect the 2 yelloW wires; thanks
one in pin 4 and the other in pin 24 , in the connector there are number , if you find the pins give them negative pulse so you will know which one lock and which one unlock . negative pulse mean you take a wire and connect one to the ground of the car and the other one to the wire which pin 4 and 24 is connected to . the connector should be fixed to the unit , you can do that either you scratch the wire or connect the negative wire with a needle and press the needle to the wire .
Salman Almahal thank you for answering, i've done it it works thank youu
your welcome and i am sorry for the late reply
Salman Almahal it's nothing, you very helped me
ma funziona anche con la chiave poi? grazie
I have polo 2005 and I am installing same system but it doesn't work for me at all please help me with it
Hi sorry for the late replay , what kind of problem you are having??
hello passat b5.5?
Thanks a lot
Your most welcome 😘
Nice
How can I know my car is a negative or a positive trigger? I burned some fuses already :P
masoud soleymani hi , negtive trigger mean that the wire is giving negtive puls if you give it sginal to activate
thank you for the video
hi, once i connected mine, it locks but doesn't unlock, pls what did i do wrong?
Okolobielu Ifeanyi hi ,chat with me in my Instagram ..salmanalmahal..
Salman Almahal my car unlocks but want lock
U forgot to connect wire (lights), when u lock and unlock car it will switch the light on and off.
yes I didn't do them
yes I didn't do them , next video I will upload
@@salmanhassan2847 Did you?
apologize how and where can I buy it
what about the blink light
Hi color cable lock/unlock for windows motor
Very helpfull. Thnx
MK4 J1J. NOT PIN 1 BUT PIN 20 THE red one
Very Helpful
Mine only unlocks it doesnt lock
Auto lottery service centre kaha pe Hoga plate plate service kaise ho ki Ja sakti hai
Hi color cable lock/unlock for windows motor HelP
how to order this product
Internet
Hello
Thanks you
is not 24 is 25
Chingis Akhmedov 25 can’t too. Can lock but not in lock
what is pin??
I have connect everything but it doesn't work
Did you try to give it directly negative puls to pin 4 and 24 ?
วิธีต่อสายสัญญานกันขโมยรถยน
I wire like that and it doesnt work
Please check if the device is working properly
@@salmanalmahal5373 it is clicking when i press the buttons
وليه م شرحته بالعربي!!!!!!
لانه العرب قليل يستخدمو هل نوع من السيارات
Please help me
انت عربي وينك اوين التونتي فور تحجة عربي هيييييي
العالم كتاب مفتوح هههههههه مزبوط
J
Very bad tutorial, I connected to pin 24 and 4 and it did not work at all.
ْ. ج
Yuo don't ilktrye sehn