Это видео недоступно.
Сожалеем об этом.
Building a 3D Printed Helmet From Halo - EOD Painting & Finishing
HTML-код
- Опубликовано: 12 май 2023
- Hi everyone!
So this is the last part of my EOD Helmet build from Halo Reach. I thank all of you who have been patient as I work on my prints! I plan on making more helmets as time goes on. Soon I hope to be able to start listing new prints I do on my Etsy store. Please let me know of any ideas or prints you'd like to see done!
Here is the link to the shop I purchased the EOD model from: www.aguilarwor...
3D Printers I use - CR-10 V3 - amzn.to/3CcfxG2
Print Settings
-0.6mm nozzle
-3 layer walls
-15% density
-7% support density
-75 mm/s speed
Tools Used:
_____________________________________________
-Milwaukee M12 Detail Sander - amzn.to/3I3uayY
-Filler Primer (Similar to the one I used in video) - amzn.to/3FYIExq
-3M Sanding Blocks - amzn.to/3WJZ5EJ
-Precision Kit - amzn.to/3YRt7bh
-Cutting Pliers - amzn.to/3YTc88P
-Compressed Air Cans ( Air compressor works the same) - amzn.to/3Wsi46T
Camera Gear:
_____________________________________________
Sony A7SIII - amzn.to/3WD8H4g
Sigma 24-70mm - amzn.to/3Gu5ezL
Go Pro Hero 10 - amzn.to/3C2idFY