Ask those goofballs why they haven’t built any Oldsmobile big block Performer RPM air gap intakes in a year. I ordered one and paid for it with Summit racing in May! got my performer rpm aluminum heads two weeks later but still waiting on my intake manifold and they’re holding up my entire engine build!!
Of course I read your comments Mitchell! I drive a white '07 LBZ CCSB. Man, y'all just keep killing it with your content! Tours that are not only cool as hell, but take us to places that have so much heritage and where most folks probably never get the chance to see. Thanks for what you guys do! LOVE IT!!
I work at a foundry in Wisconsin. It's different than sand casting, we do hollow molds that go through a different process than sand. Pretty neat to watch honestly. Some of our parts are very intricate. The parts start out as a wax pattern, that pattern gets melted out of a shell that is dipped in a multitude of different elements to hold its shape, and dries into a hollow cavity. Molten steel is then poured into the molds. Molds cool, outer shell material is removed.
My father worked in a foundry (Dodge Steel) in the 1950s. He told me that setting up the pour for a new pattern was part science and part art back then. Couldn't be taught in school, it had to be learned from an experienced person. That computer modeling software is very cool! When the company decided that every employee above a certain level had to have a college degree the person that set up the pours got fired. Of course that man was almost instantly hired by another foundry. My dad always felt that was the beginning of the end for Dodge Steel. By the way, love the channel. Keep on talking to the old guys! When they pass on it would be a shame to lose what they knew.
Led a team of foundry maintenance engineers for years. Cast iron and aluminum foundries. Damn hot and noisy, but awesome band of foundry workers. Great content once again. Keep it going.
I'm an architect and some years ago I did some work for Atlas Foundry in Tacoma WA. They were making parts for nuclear sub reactors at the time and had an x-ray room for testing the parts that was definitely scary. Put out enough x-rays to kill you if you ever got caught inside. They had tons of safety precautions of course.
Awesome video guys would have never known just how large Edelbrock manufacturing has become. It is real interesting to learn about the behind the scenes stuff that goes into the product. Thank you!
Thanks for taking us where we never thaught posable . I am blown away by all the processes that happen behind the scenes at Edelbrock . What a vast organization , and proudly American!!!!. I'm totally crushed by your video . many thanks..Stu from Canada...................................
Great video, thanks for sharing! I designed and started up the two furnaces used to make the molten aluminum in this foundry! Love seeing them still making castings!
Shoot Edelbrock has burned a spot in my heart. I grew up in. Speed shop. As a kid I would handle all the stock and their manifolds always looked nicer then the others. I remember buying my first one for my own car still to this day.
I love these videos ! I'm 70 and i was fortunate to be a plant engineer for 25 years at an upstate NY. cutlery co. We made quality stamped knives and all types of cutting blades. we performed all the processes in one plant. We stamped stainless steel, did heat treatment , Grinding , polishing , edge grinding , made and assembled handles. Some of the specialty machine were engineered and made in our own machine shop. Just like your video subjects say, it is very gratifying to see a product go from start to finish. In the 70's and 80's we had many companies that did just that! Now i drive by these rundown buildings that use to house Mfg. companies of all sorts, and i feel sorry that workers don't have the opportunity to be a part of a team that took pride in working to produce a quality product that could consumers could rely on ! As you might imagine I'm a car guy , Corvette ! really any thing with a motor! I always tow a trailer ! you just never know what you might want to bring home!!!
Another amazing video! It's really nice to see something still made in America. Pretty cool seeing the process from ingot to finished product. That black plasma coating looks sick! Suck it Cole
The casting was one of my favourite parts of school. We were taught this when I was about 12 years old. From start to finish. What a great experience that was. ✌️🇺🇲✌️🇬🇧
In 35 to 40 years, and 100's if not 1000's of Edelbrock products, NEVER ONCE have I been not happy. Solid products. always has been, the employees there clearly love their craftsmanship and know their skill sets. I can remember being about 16 years old and needed a new intake, as the factory unit corroded through where the neck is and Edelbrock is the only name I knew of, so, I got one. Please note, a tunnel ram or long runner intake sure looked cool, so I ordered one of those, and completely forgot to think about, I need to now cut a hole in the hood, LOL.. My dad was just shaking his head. I remember my dad saying, "Son, once you go this route, there is no turning back.. Not realizing, he wasn't just simply talking about cutting a hole in my hood, it was the newly found addiction to HP.. My first after market part and actually got to see and feel the improvements in HP. For a silly kid, I was hooked on HP ever since.
Hi, this is totally off-topic here, but because there's just so many replies to your recent comment under that @d4a video, this is the only way I could think of to actually contact you. Is there any way we could talk without the overzealous YT automoderation getting in the way?
@@mskiptr I don't see why not. I must say, I hope you are understanding all my efforts are just that, while noting, I am not an expert at anything, but more over, I don't don't fear trying new things, either in efforts to just see if I can do them, or out of curiosity, that is direct results of something I had already done or due to future plans and education must take place before I get to the next stage of a problem or project. But sure, I don't mind speaking to you personally.
@@drubradley8821 Thanks! And btw, it's not like I "have this awesome idea that will definitely fix all the issues with these engines" or "have come up with the ultimate solution to the lubrication problem". Actually, I don't really want to talk about making the engine work. I'm no mechanical engineer. The topic I have in mind is more about YT instead. So could you write to me? My address is just
a[at]b.c where a is piotr, b is maslowski and c is xyz Oh well. It took quite some time to get this to stick. Sorry for any notifications that might've generated.
@@mskiptr I will try to crack this code in the morning and send a confirmation email, but, I don't not see suffix host directive, like Yahoo, Google, Hotmail, etc .
One of the most impressive videos showing the back ground and manufacturing of items that heaps of people use everyday, personally I have visited Harrop Engineering in Melbourne, I loved the time there just walking around asking questions to the workers mind blowing, I had done work in other foundries in South Australia in the 1990s both Aluminum and Iron. Keep up the great work you two.
I have worked as a Union Millwright in the steel mills around northwest Indiana. Even after 26 years, it is still amazing! Thank you for your videos!!!
Thanks for another very informative, fun, factory tour. Edelbrock is one of the first, & foremost original companies to manufacture after market components as direct bolt on replacements available to not only racing teams, but to anyone whom wanted to improve performance of their own vehicles.
I worked in an aluminium foundry for 30 years - the company pioneered the sand moulding and we also had a sand foundry as we had a lot of castings that needed sand moulds.
Awesome tour guys! I worked as a pattern maker for 30 years and I always enjoyed visiting the various foundries and seeing the tooling I produced being used. We made a ton of the red plastic core boxes (cold process) as well as hot boxes and some permanent mold tooling. It's great to see Edelbrock truly manufacturing in the USA, not just assembling parts sourced from around the globe.
I worked for a heavy equipment and engine maker in IL in various roles: CNC, assembly and in their iron casting foundry. I have an Edelbrock Airgap intake on my 360 Lil Red Express, so neat to seeing Edelbrock’s aluminum foundry in operation. The foundry I worked in once made NASCAR engine blocks for Pontiac and Dodge. Their foundry was way cleaner than the foundry I worked in for 6 years. We poured a huge amount of iron every year. I shook out hundreds of thousands of heads and engine blocks there, made cores, ran heat treat ovens, set cores, finned parts, ran Manmates too in the Shake Out areas. Now I’m retired.
Thanks for the content. There was a lot of speculation about the Edelbrock facilities 2 years ago. Now we know what's up. 1963 Mercury Comet hardtop, stroker SBF w/ Edelbrock Performer RPM intake manifold 👍
Probably the coolest thing ive ever seen as far as foundrys is the Ferrrari factory video tour, you cant beleive the engineering and thought that they put into each car, every part of their cars are made in their own factory, every block, head, valve, intake, crankshaft, timing set, etc is forged or cast at their own facility nothing is farmed out ! They even have special alloy formulas for each part that they also formulate and use in all the parts including the bodies and space frames
One of my favorite jobs was a mold maker at a foundry. We used a mix of reclaimed sand, new sand and various chemicals as the binder. Messy, hot, cold and dangerous. I loved every day, till I started driving. The science behind this investment type casting is pretty amazing. Great content as usual, keep up the great work.
This reminded me of my high school days. I was very lucky to be able to do different things to learn about how to make things, as I was learning about those type of processes. It was how I learned my love for building things, and the world of being a mechanic back in the very early 70’s. I actually made a sand mold, and made an aluminum casting of a fish. Did the whole process by hand. Thanks for the memories.
I work at a machine shop. KSB.. We are the 4th biggest pumo manufacturer in the world.. I work at standard alloys division in Port Arthur TX and we have a foundry that casts all our parts. I was supposed to have a tour of the foundry when I was hired but covid restrictions made it where I couldn't. I have been at this shop for 2 years now and it's pretty cool that we make all our parts from start to finish. I'm a cnc machinist and programmer. This was a really cool video. I'm also a car guy... My dad was a master mechanic and always had race cars and I was a mechanic also for a few years. Just moved to machining and liked it alot more... I still have a turbo foxbody though and wrench on that all the time.
This is a great video experience for me, since I used to deliver and pick up parts from the original Edelbrock company on Jefferson Blvd in LA --- and when they moved to Torrance I was able to visit as well. Keep making these fabulous videos - no one else is doing this --- THANKS
This is a long awaited tour video; thanks for this! Many years ago, I toured a Westinghouse (at the time, later purchased by Phillips Lighting) fluorescent light bulb plant in my hometown (Salina, KS). From the molten glass oven to where the glass tube was cut with cold compressed air, there was 1/4 mile of continuous glass tubing in that facility. The entire process from start to load out was amazingly automated...this was in mid 1970's. The plant closed several years ago due to LED lighting becoming mainstream.
The only foundry I’ve been in, two or three of them, are bronze foundries. Sculptures. And how they go from a 12” tall statue to a 25’ tall one blows my mind. This place would be true cad guy heaven and just, in awe.
I love your content man! Seeing and speaking with those people making great stuff must be really fulfilling. It sure looks interesting. Thanks very much
I drive an Australian Ford Territory with the Barra engine. I really love these factory tours. I liked seeing the Holden manifolds . These tours gives you so much confidence that the parts are built to to highest standard by people who care and have fantastic knowledge.
My dad was a wood pattern maker back in the late 40's to the late 70's. Served his apprenticeship at Ford Motor Company, and later went to the job shops to make more money. Back then he made tons of money with overtime etc.. They ended up getting rid of most of the pattern makers in the Detroit area, but he had a great career. I read the comments and I drive a Corvette
Hello from Australia. Your videos are so good, really love the technical stuff as in the Comp Cams episode and all the "How stuff is made" episodes . Learning so much. All these manufacturing facilities are full of old school knowledge and some of the old machines are still so reliable after 50 years. Currently driving a 1970 XW Falcon ute with a 351 Cleveland, 4 sp Toploader, 3:55 9 inch and a 2017 Mustang (auto) with a Harrop superchager. Myself and 2 mates went to the Woodward Dream Cruise in 2019, we also did the Gilmore collection, Stahl collection, Ford Piquette plant and a couple others on the way to the Lucas oils Nationals at Indianapolis, we were so impressed with the car scene in Americia. Thanks again.
Great video! I've had the unique opportunity to tour hundreds of manufacturing facilities. Foundries are really neat places. Hot, usually dirty from the sand everywhere, but pouring liquid metal is awesome.
I worked at a foundry in the 70's and the processes are very similar. There is a HUGE difference in the cleanliness of the facility to what I worked in at MESCCO in the Twin Cities. This is Aluminum versus steel casting, but the basic process is unchanged. It's cool to see how technology allows better tracking of the fill process. Very impressed with the facilities orderliness.
Thoroughly enjoying these tours of the companies that i have bought parts from over the years. To know what went into the creation of what i bolted on is awesome! You two are killin' it with these videos! And hats off to these companies that open their doors and give you there time to get the information for these tours. Very cool Mitchell and Logan!
This stuff is amazing man!! Ive watched like 90% of your content and it just keeps getting better and better. Thank you for doing what you do! Big props to edelbrock for allowing this and for keeping everything made in house in the USA. Not only is this great advertising for Edelbrock, but its amazing to watch and super educational. Props all around man!
I love these type of videos! It's so awesome to see inner workings of a factory especially one like Edelbrock! Love the content love the channel love everything y'all do!
My daily driver is a 2019 Tahoe furnished by the company I work for. My classics are 65 Thunderbird and 53 F100. Went to the local steel factory years ago. They use an arc furnace. Melts metal with a giant electrical arc. I have a Edelbrock Pro Flo 4 on my T-bird and I love it!
I worked for Gerdau steel in Fort Smith Arkansas as a temp to hire on the Q.C. program. I worked right next to the massive cooling bed. It looked like half a football fields worth of red hot steel rods that made so much heat you couldn't see clearly across it. Literally the hardest job I ever did...I didn't stick it out. I couldn't imagine leaving work every day with acute swamp ass so bad it's hard to make the half-mile walk to the lot.
I've never been in a foundry, but I've been in some really large automotive assembly plants (Nissan in Tennessee and Toyota in Indiana). Honestly though, the one that impressed me the most was the MTD lawn mower manufacturing facility in Tennessee, mainly because I didn't understand how big of a business selling lawnmowers was until I went into that gigantic factory.
Worked at Wescast ages ago. At the time they made cast iron exhaust manifolds for a variety of manufacturers. Was always fun to walk out into the plant, very loud though. They had 4 (5?) induction furnaces. That was the only area I was kinda nervous about at first as you could walk up just a few feed from the molten metal in the furnace. I recall the smell of the bonding agent used to make the cores and the machine work to maintain them. Fun times.
My dad was a molder, he made molds mostly for brass and aluminum. I kinda grew up in a foundry even though dad did everything he could to prevent me from going into foundy work because of the risk and danger. I ended up as a career Marine...much safer! LOL I drive a 2010 Impala SS with a Whipple supercharger and a 100hp shot of NO2.
Love this stuff in this video! You & Logan are sure scoring the cool places to shoot a video, and you know I appreciate it and you both! Keep up the tech items, and you know I'm there with you all as you produce these videos for us all to enjoy!
I read all the comments in your videos. I'm loving these factory tours, you and Logan are doing an amazing job. I drive a '97 K2500 Silverado, and have a couple of projects as well, '90 S10 Tahoe and a '94 Civic Ex
So I was board last summer thumbing through an Edelbrock catalog and ended up ordering everything they sell for a gen 1 5.7. the damn thing runs so good it's now my daily. The best four grand I have ever spent. No joke, if you have a chance to an Edelbrock catalog build DO IT!
Ahhh the joys of aluminum. That has to be the *_cleanest_* foundry I've ever seen! (I'm used to cast iron foundries for machine tool structures & they are such dark, dirty, dirty places.)
@@Stapleton42 and I'm an engineer that initially wanted to go into automotive so I *_love_* this kind of stuff & especially the technical stuff. Can't wait for the next Lake Speed/Jr video!
I worked for Doehler-Jarvis aluminum foundry in Greenville, Tn. We made Ford four cylinder heads and Buick intake manifolds using the sand core method. Brings back a lot of memories.
Love the videos of manufacturing facilities in operation. Lost foam casting (LFC) would be great material for your next casting video. Good job showcasing behind the scenes material in your videos. 👍🏼
I've been to the Budweiser foundry a few times and they used to give out free samples. This is the first time viewing Edelbrock foundry, very interesting probably no free samples. Thanks for doing this.
very cool. I don't think you can appreciate what goes on in a foundry till you have been in one. I worked at Stahl specialty in Kingsville MO for 9 years. It is the closest thing to hell on earth. we didn't have robots to pour the metal, we had to hand ladle our parts. We cast the oil pan, timing gear cover and flywheel housings for cat and detroit among other things. Awesome thing to be proud of, but took years off my life for sure. Thanks for showing how things are made that people don't normally get to see.
Thank you fro your videos on the manufacturing process. Some home machinist can make parts, some can make them accurately but to make thousands of parts a day accurately is a different animal. I strive to take some of the techniques you show in your videos to make me more more precise as a hobyist. Thank you!
MERRY CHRISTMAS. I JUST RAN ACCROS THIS VIDEO. I WORKED IN A CAST IRON FOUNDRY FOR 10 YEARS, DID EVERY JOB FROM MELTING IRON TO FINISHED PRODUCT. BROUGHT BACK GREAT MEMORYS. AS FOR CARS I HAVE......454 POWERED 1970 PRO STREET MONTE CARLO AND A 2008 4WD CHEVY AVALANCHE WITH EDELBROCK E FORCE SUPERCHARGER. YA JUST GOT A NEW SUBSCRIBER.
Wow really enjoyed your video , VERY interesting to see how the product for which I've been using since the 60s is manufactured and still made in America . Thank you for allowing us to see how it's made.🇺🇲 And Thank you for making these videos 😊
I’m in South Australia 🇦🇺. I’m a toolmaker. We had a company called Castalloy which cast all of Holdens aluminium components. We also cast the Harley Davison wheels. Unfortunately they closed down but I’ll never forget it.
I love the variety man. Keep it up, I love seeing the subscriber count grow as well when I get a chance to get on here and catch up. Awesome to see you and Logan growing as well.
I always try to read the comments in any video that's interesting. It's a good way to find out valuable information. I drive a '07 Harley Davidson F150 Super Crew Cab.
When i was 19 I got a job in a machine shop with no experience and learned every old school machine in a year. Drill press, radial drill, bridgeport, horizontal/boring mill, etc. Then came the CNCs and that changed production to a new level. I learned Everything CNC in another year. We machined WELDGUN (copper beryllium alloy) castings for automotive production lines. The company eventually had a problem getting casting patterns made fast enough to keep up with CNC production by outside suppliers/pattern makers. They made them out of wood. Very technical shapes with hollow passages inside for cooling when in operation spot welding body parts on production lines. It would take 1-3 weeks to get a pattern from suppliers. We started making patterns in house with a CNC router. They trained me to 3D model/program/ machine via CNC router. We could make 2 or 3 complex patterns per day with that one machine. I got to see the foundry operation that used our patterns so that i could understand the process. It was a filthy place where everything was done by hand. I was so glad i didnt work at the foundry. It was in 1994 . I drew the 3D model from a blueprint in CAD as then apply CAM software to create the tool path for the machine. send it to the machine which carved the pattern out of a bondo like substance in 2 halves. putting the 2 halves together made the full pattern. It was x 5x5 CNC router that carved in 3D and shape or curve you wanted. It was a great learning experience for 5 years. CNC/CAD/CAM is awesome technology. We used "tombstones" on the horizontal CNC machines also. While 1 operation was running the operator would set up the next tombstone. As soon as the one finished it would rotate out and the next one would start. Amazing use of technology to minimize down time and boost production.
Yes I read the comments as they pop up. And yes any technical information, insight, following the production line and showing each step will be watched with much enthusiasm. Thank you so much for putting these videos together for us to see.
Definitely reading the captions/comments. I've got a 2007 Tundra that definitely isn't fast but it's gotten me everywhere I've ever wanted to go in it.
I like seeing everything from materials in to finished product ready to ship and the guys with what used to be white shop coats designing it and showing the shop machinist how to make it. Basically everything you guys have done the only place I have been is Brodix
Very cool they name the machines after Race tracks, glad you got to see Oswego a smaller super speedway in Northern Central NY right in the middle of town about 60 miles from me
I used to be a CNC machinist at Caterpillar tractor in Illinois before I retired. For several months I work in heat treat at caterpillar and I cannot imagine the heat that comes off of track links for those big tractors. The heat is unbelievable
The subtitles are awesome and that warehouse reminded me of the 80's Speed Shops that were a chain store across the US, Can't remember the guys name but he sold everything including Edelbrock and Comp Cams among all things muscle car
I drive a 2002 2500hd Silverado and a 2012 traverse for the family trips. Have an 85 and 86 Z28 both rolling projects. And a 95 Honda del sol. Currently working the bugs out of an 04 zx3 for my daughter as a first car. I read whatcha put up brother 😉. Gonna have to scroll through and get some merch to do my part in supporting this channel. Thanks again for all that you do.
I worked in a foundry in Elkhart Indiana. We made firefighting equipment. It was really cool (pun intended). I had made a career move from the Machining department to the Maintenance dept. so I was able to see how our product was made from a solid ingot all the way to a finished part ready to ship.
Met Vic Edelbrock and his daughters in the food line at Road Atlanta years ago. At the time he was running three of Smokey Yunick's Camaros two of which Smokey had scaled and cut down as smaller versions. They were sitting in the Paddock and you could not tell until they put them side by side. "Old School is old, but we ain't all gone yet."
Yes some of us have actually worked in a Ford Motor Company foundry and been in Holleys! And some or most of us have machined manifolds, heads, transmission housings etc! Love this video!
I was the owner of the company that transported the furnaces and all the machinery used in setting up this foundry. FYI they don't just make Edelbrock parts. They produce castings for whoever so as to maximize productivity and utilization. This was one of Edelbrock" better ideas.
Hahaha, I like what you did there!! I did that kind of thing in a book report once. The teacher never commented on my "are you even reading this" sentence right in the middle of it. Of course I read the comments on your videos! I'm currently working on turning the first car that I bought over 20 years ago into an ARA rally car. It is a '76 Toyota Celica. All our other cars are GMs though. A few Camaros, a Corvette, and a few others but my favorite is our '73 Nova. Our main daily driver is a '96 Tahoe.
Oh snap! I didn't know they had a facility in MS. I live less than an hour from the one here in NC. It's cool that y'all are showing the wide spectrum of the performance automotive industry and how it inspires enthusiasts to keep wrenching. Thank you so much.
Answering - 1956 Ford f100 with 390 FE and yes it has an Edelbrock RPM 7105 intake. Maybe I'm mistaken but believe they were making the 7105 on the Oswego speedway machine when talking about the tombstone setup. Very cool 😎
How do you think they make the motor housing and other parts for your wonderful electric car? All of them use elaborate large die casting and extrusions for the motors.
We’re planning on going live tomorrow afternoon to hang out with you guys…so prepare your questions!
stapletonautoworks.com
Oh that's awesome man, ill be there for sure
Fyi.. edlbrock will soon be building Holley style carberator
Ask those goofballs why they haven’t built any Oldsmobile big block Performer RPM air gap intakes in a year. I ordered one and paid for it with Summit racing in May! got my performer rpm aluminum heads two weeks later but still waiting on my intake manifold and they’re holding up my entire engine build!!
@@nunyabiz8708 They already are. It's been on the shelf for about a month!!
Suggestion: get a lapel microphone for your interviewees. I was only catching about 50% of what he said on the foundry floor.
A big thanks to you two and Edelbrock for allowing us all the see the process. So interesting to learn.
Of course I read your comments Mitchell! I drive a white '07 LBZ CCSB. Man, y'all just keep killing it with your content! Tours that are not only cool as hell, but take us to places that have so much heritage and where most folks probably never get the chance to see. Thanks for what you guys do! LOVE IT!!
Thank you so much Mike!
I work at a foundry in Wisconsin. It's different than sand casting, we do hollow molds that go through a different process than sand. Pretty neat to watch honestly.
Some of our parts are very intricate. The parts start out as a wax pattern, that pattern gets melted out of a shell that is dipped in a multitude of different elements to hold its shape, and dries into a hollow cavity. Molten steel is then poured into the molds. Molds cool, outer shell material is removed.
Lost wax... We have Precision Cast Parts that does that process in my city... mostly with really exotic metals for aircraft jet engine internals
3d printing has changed casting I’d assume..how do you see the billet manufacturing impacting casting products?
Neenah?
Jewelry is made similarly. Very interesting process
Investment Castings.
My father worked in a foundry (Dodge Steel) in the 1950s. He told me that setting up the pour for a new pattern was part science and part art back then. Couldn't be taught in school, it had to be learned from an experienced person. That computer modeling software is very cool!
When the company decided that every employee above a certain level had to have a college degree the person that set up the pours got fired. Of course that man was almost instantly hired by another foundry. My dad always felt that was the beginning of the end for Dodge Steel.
By the way, love the channel. Keep on talking to the old guys! When they pass on it would be a shame to lose what they knew.
Thanks for sharing & educating people with how Edelbrock makes our Intake Manifolds!
Led a team of foundry maintenance engineers for years. Cast iron and aluminum foundries. Damn hot and noisy, but awesome band of foundry workers. Great content once again. Keep it going.
Thank you Andrew we will!!
I'm an architect and some years ago I did some work for Atlas Foundry in Tacoma WA. They were making parts for nuclear sub reactors at the time and had an x-ray room for testing the parts that was definitely scary. Put out enough x-rays to kill you if you ever got caught inside. They had tons of safety precautions of course.
Awesome video guys would have never known just how large Edelbrock manufacturing has become. It is real interesting to learn about the behind the scenes stuff that goes into the product. Thank you!
Thanks Scott!
You and Logan are doing an awesome job. Thanks for preserving Nascar history.
Our pleasure!
Thanks for taking us where we never thaught posable . I am blown away by all the processes that happen behind the scenes at Edelbrock . What a vast organization , and proudly American!!!!. I'm totally crushed by your video . many thanks..Stu from Canada...................................
Great video, thanks for sharing! I designed and started up the two furnaces used to make the molten aluminum in this foundry! Love seeing them still making castings!
That’s awesome
Shoot Edelbrock has burned a spot in my heart. I grew up in. Speed shop. As a kid I would handle all the stock and their manifolds always looked nicer then the others. I remember buying my first one for my own car still to this day.
I love these videos ! I'm 70 and i was fortunate to be a plant engineer for 25 years at an upstate NY. cutlery co. We made quality stamped knives and all types of cutting blades. we performed all the processes in one plant. We stamped stainless steel, did heat treatment , Grinding , polishing , edge grinding , made and assembled handles. Some of the specialty machine were engineered and made in our own machine shop. Just like your video subjects say, it is very gratifying to see a product go from start to finish. In the 70's and 80's we had many companies that did just that! Now i drive by these rundown buildings that use to house Mfg. companies of all sorts, and i feel sorry that workers don't have the opportunity to be a part of a team that took pride in working to produce a quality product that could consumers could rely on ! As you might imagine I'm a car guy , Corvette ! really any thing with a motor! I always tow a trailer ! you just never know what you might want to bring home!!!
Thanks man. It is sad to see American manufacturing go away. I feel like it’ll come back in my lifetime
Another amazing video! It's really nice to see something still made in America. Pretty cool seeing the process from ingot to finished product. That black plasma coating looks sick! Suck it Cole
The casting was one of my favourite parts of school. We were taught this when I was about 12 years old. From start to finish. What a great experience that was. ✌️🇺🇲✌️🇬🇧
......where do you live that they teach that to 12 year Olds?
In 35 to 40 years, and 100's if not 1000's of Edelbrock products, NEVER ONCE have I been not happy. Solid products. always has been, the employees there clearly love their craftsmanship and know their skill sets. I can remember being about 16 years old and needed a new intake, as the factory unit corroded through where the neck is and Edelbrock is the only name I knew of, so, I got one. Please note, a tunnel ram or long runner intake sure looked cool, so I ordered one of those, and completely forgot to think about, I need to now cut a hole in the hood, LOL.. My dad was just shaking his head. I remember my dad saying, "Son, once you go this route, there is no turning back.. Not realizing, he wasn't just simply talking about cutting a hole in my hood, it was the newly found addiction to HP.. My first after market part and actually got to see and feel the improvements in HP. For a silly kid, I was hooked on HP ever since.
Hi, this is totally off-topic here, but because there's just so many replies to your recent comment under that @d4a video, this is the only way I could think of to actually contact you. Is there any way we could talk without the overzealous YT automoderation getting in the way?
@@mskiptr I don't see why not. I must say, I hope you are understanding all my efforts are just that, while noting, I am not an expert at anything, but more over, I don't don't fear trying new things, either in efforts to just see if I can do them, or out of curiosity, that is direct results of something I had already done or due to future plans and education must take place before I get to the next stage of a problem or project. But sure, I don't mind speaking to you personally.
@@drubradley8821 Thanks! And btw, it's not like I "have this awesome idea that will definitely fix all the issues with these engines" or "have come up with the ultimate solution to the lubrication problem". Actually, I don't really want to talk about making the engine work. I'm no mechanical engineer. The topic I have in mind is more about YT instead.
So could you write to me? My address is just
a[at]b.c where a is piotr, b is maslowski and c is xyz
Oh well. It took quite some time to get this to stick. Sorry for any notifications that might've generated.
@@mskiptr I will try to crack this code in the morning and send a confirmation email, but, I don't not see suffix host directive, like Yahoo, Google, Hotmail, etc .
One of the most impressive videos showing the back ground and manufacturing of items that heaps of people use everyday, personally I have visited Harrop Engineering in Melbourne, I loved the time there just walking around asking questions to the workers mind blowing, I had done work in other foundries in South Australia in the 1990s both Aluminum and Iron.
Keep up the great work you two.
I have worked as a Union Millwright in the steel mills around northwest Indiana. Even after 26 years, it is still amazing! Thank you for your videos!!!
thanks man!!
Thanks for another very informative, fun, factory tour. Edelbrock is one of the first, & foremost original companies to manufacture after market components as direct bolt on replacements available to not only racing teams, but to anyone whom wanted to improve performance of their own vehicles.
I worked in an aluminium foundry for 30 years - the company pioneered the sand moulding and we also had a sand foundry as we had a lot of castings that needed sand moulds.
Awesome tour guys! I worked as a pattern maker for 30 years and I always enjoyed visiting the various foundries and seeing the tooling I produced being used. We made a ton of the red plastic core boxes (cold process) as well as hot boxes and some permanent mold tooling. It's great to see Edelbrock truly manufacturing in the USA, not just assembling parts sourced from around the globe.
I worked for a heavy equipment and engine maker in IL in various roles: CNC, assembly and in their iron casting foundry. I have an Edelbrock Airgap intake on my 360 Lil Red Express, so neat to seeing Edelbrock’s aluminum foundry in operation. The foundry I worked in once made NASCAR engine blocks for Pontiac and Dodge.
Their foundry was way cleaner than the foundry I worked in for 6 years. We poured a huge amount of iron every year. I shook out hundreds of thousands of heads and engine blocks there, made cores, ran heat treat ovens, set cores, finned parts, ran Manmates too in the Shake Out areas. Now I’m retired.
That’s awesome. What a job that must have been
Thanks for the content. There was a lot of speculation about the Edelbrock facilities 2 years ago. Now we know what's up. 1963 Mercury Comet hardtop, stroker SBF w/ Edelbrock Performer RPM intake manifold 👍
Edelbrock Manifold Best Engine Buick And Chevrolet From The 70s 80s And Early 90s Thanks For Uploading
Thanks Jeffrey!
Probably the coolest thing ive ever seen as far as foundrys is the Ferrrari factory video tour, you cant beleive the engineering and thought that they put into each car, every part of their cars are made in their own factory, every block, head, valve, intake, crankshaft, timing set, etc is forged or cast at their own facility nothing is farmed out ! They even have special alloy formulas for each part that they also formulate and use in all the parts including the bodies and space frames
Thanks man!!
One of my favorite jobs was a mold maker at a foundry. We used a mix of reclaimed sand, new sand and various chemicals as the binder. Messy, hot, cold and dangerous. I loved every day, till I started driving. The science behind this investment type casting is pretty amazing. Great content as usual, keep up the great work.
Thanks man!!
This reminded me of my high school days. I was very lucky to be able to do different things to learn about how to make things, as I was learning about those type of processes. It was how I learned my love for building things, and the world of being a mechanic back in the very early 70’s. I actually made a sand mold, and made an aluminum casting of a fish. Did the whole process by hand. Thanks for the memories.
Thats awesome Steve we are glad to have you here!
I work at a machine shop. KSB.. We are the 4th biggest pumo manufacturer in the world.. I work at standard alloys division in Port Arthur TX and we have a foundry that casts all our parts. I was supposed to have a tour of the foundry when I was hired but covid restrictions made it where I couldn't. I have been at this shop for 2 years now and it's pretty cool that we make all our parts from start to finish. I'm a cnc machinist and programmer. This was a really cool video. I'm also a car guy... My dad was a master mechanic and always had race cars and I was a mechanic also for a few years. Just moved to machining and liked it alot more... I still have a turbo foxbody though and wrench on that all the time.
Never seen the inside of a foundry in this much detail. So awesome
This is a great video experience for me, since I used to deliver and pick up parts from the original Edelbrock company on Jefferson Blvd in LA --- and when they moved to Torrance I was able to visit as well. Keep making these fabulous videos - no one else is doing this --- THANKS
These and the racing history videos are always worth watching. Thanks for taking the time to make these! Wearing my SAW hat now!
Thanks for helping me pass the time at work Stapleton and Logan 👍. U guys always bring us some amazing content
Thanks for being here Jared!
This is a long awaited tour video; thanks for this! Many years ago, I toured a Westinghouse (at the time, later purchased by Phillips Lighting) fluorescent light bulb plant in my hometown (Salina, KS). From the molten glass oven to where the glass tube was cut with cold compressed air, there was 1/4 mile of continuous glass tubing in that facility. The entire process from start to load out was amazingly automated...this was in mid 1970's. The plant closed several years ago due to LED lighting becoming mainstream.
The only foundry I’ve been in, two or three of them, are bronze foundries. Sculptures. And how they go from a 12” tall statue to a 25’ tall one blows my mind. This place would be true cad guy heaven and just, in awe.
I love your content man! Seeing and speaking with those people making great stuff must be really fulfilling. It sure looks interesting. Thanks very much
I drive an Australian Ford Territory with the Barra engine. I really love these factory tours. I liked seeing the Holden manifolds . These tours gives you so much confidence that the parts are built to to highest standard by people who care and have fantastic knowledge.
Thanks Stefan!
My dad was a wood pattern maker back in the late 40's to the late 70's. Served his apprenticeship at Ford Motor Company, and later went to the job shops to make more money. Back then he made tons of money with overtime etc.. They ended up getting rid of most of the pattern makers in the Detroit area, but he had a great career. I read the comments and I drive a Corvette
Wow man that’s awesome
Hello from Australia. Your videos are so good, really love the technical stuff as in the Comp Cams episode and all the "How stuff is made" episodes . Learning so much. All these manufacturing facilities are full of old school knowledge and some of the old machines are still so reliable after 50 years. Currently driving a 1970 XW Falcon ute with a 351 Cleveland, 4 sp Toploader, 3:55 9 inch and a 2017 Mustang (auto) with a Harrop superchager. Myself and 2 mates went to the Woodward Dream Cruise in 2019, we also did the Gilmore collection, Stahl collection, Ford Piquette plant and a couple others on the way to the Lucas oils Nationals at Indianapolis, we were so impressed with the car scene in Americia.
Thanks again.
Great video! I've had the unique opportunity to tour hundreds of manufacturing facilities. Foundries are really neat places. Hot, usually dirty from the sand everywhere, but pouring liquid metal is awesome.
Absolutely!
I worked at a foundry in the 70's and the processes are very similar. There is a HUGE difference in the cleanliness of the facility to what I worked in at MESCCO in the Twin Cities. This is Aluminum versus steel casting, but the basic process is unchanged. It's cool to see how technology allows better tracking of the fill process. Very impressed with the facilities orderliness.
Thoroughly enjoying these tours of the companies that i have bought parts from over the years. To know what went into the creation of what i bolted on is awesome! You two are killin' it with these videos! And hats off to these companies that open their doors and give you there time to get the information for these tours. Very cool Mitchell and Logan!
This stuff is amazing man!! Ive watched like 90% of your content and it just keeps getting better and better. Thank you for doing what you do!
Big props to edelbrock for allowing this and for keeping everything made in house in the USA.
Not only is this great advertising for Edelbrock, but its amazing to watch and super educational. Props all around man!
I love these type of videos! It's so awesome to see inner workings of a factory especially one like Edelbrock! Love the content love the channel love everything y'all do!
Same Jonathan thank you for being here with us for it!
@@Stapleton42 Thank you!
My daily driver is a 2019 Tahoe furnished by the company I work for. My classics are 65 Thunderbird and 53 F100. Went to the local steel factory years ago. They use an arc furnace. Melts metal with a giant electrical arc. I have a Edelbrock Pro Flo 4 on my T-bird and I love it!
I worked for Gerdau steel in Fort Smith Arkansas as a temp to hire on the Q.C. program. I worked right next to the massive cooling bed. It looked like half a football fields worth of red hot steel rods that made so much heat you couldn't see clearly across it. Literally the hardest job I ever did...I didn't stick it out. I couldn't imagine leaving work every day with acute swamp ass so bad it's hard to make the half-mile walk to the lot.
I've never been in a foundry, but I've been in some really large automotive assembly plants (Nissan in Tennessee and Toyota in Indiana). Honestly though, the one that impressed me the most was the MTD lawn mower manufacturing facility in Tennessee, mainly because I didn't understand how big of a business selling lawnmowers was until I went into that gigantic factory.
I drive a 2022 BRONCO OUTER BANKS 2dr. The guy giving you the tour is a class act, A good representative for the company.
For what it's worth I do read the captions even though I don't own a car. I just enjoy learning about technology.
Thats even cooler! If you ever do have one you will be well equipped lol
Worked at Wescast ages ago. At the time they made cast iron exhaust manifolds for a variety of manufacturers. Was always fun to walk out into the plant, very loud though. They had 4 (5?) induction furnaces. That was the only area I was kinda nervous about at first as you could walk up just a few feed from the molten metal in the furnace. I recall the smell of the bonding agent used to make the cores and the machine work to maintain them. Fun times.
My dad was a molder, he made molds mostly for brass and aluminum. I kinda grew up in a foundry even though dad did everything he could to prevent me from going into foundy work because of the risk and danger. I ended up as a career Marine...much safer! LOL I drive a 2010 Impala SS with a Whipple supercharger and a 100hp shot of NO2.
Love this stuff in this video! You & Logan are sure scoring the cool places to shoot a video, and you know I appreciate it and you both! Keep up the tech items, and you know I'm there with you all as you produce these videos for us all to enjoy!
Another one knocked out of the park. Great interview questions there at the end! Can't wait to see the next video.
Glad you enjoyed it! We appreciate you Timmy!
1986 ford mustang I always read them I get more out of the video reading them thank u
I read all the comments in your videos. I'm loving these factory tours, you and Logan are doing an amazing job. I drive a '97 K2500 Silverado, and have a couple of projects as well, '90 S10 Tahoe and a '94 Civic Ex
Thanks man! The comments are usually pretty entertaining lol
I met Vic and Tammy many years ago, super nice folks and Vic had some cool stories to tell
Of course I watched the whole thing! Loved the Holden reference 🇦🇺🇦🇺🇦🇺 Thanks again for a great see through. Cheers guys!
So I was board last summer thumbing through an Edelbrock catalog and ended up ordering everything they sell for a gen 1 5.7. the damn thing runs so good it's now my daily. The best four grand I have ever spent. No joke, if you have a chance to an Edelbrock catalog build DO IT!
Eddy from Myrtle Beach SC again. another great one guys. Loved it. Take care and keep em coming.
Ahhh the joys of aluminum.
That has to be the *_cleanest_* foundry I've ever seen! (I'm used to cast iron foundries for machine tool structures & they are such dark, dirty, dirty places.)
For real!!
@@Stapleton42 and I'm an engineer that initially wanted to go into automotive so I *_love_* this kind of stuff & especially the technical stuff.
Can't wait for the next Lake Speed/Jr video!
I worked for Doehler-Jarvis aluminum foundry in Greenville, Tn. We made Ford four cylinder heads and Buick intake manifolds using the sand core method. Brings back a lot of memories.
THANX FOR THE TOUR!!
Our pleasure!
Impressive manufacturing facility--both locations. Wow, Thx
Love the videos of manufacturing facilities in operation. Lost foam casting (LFC) would be great material for your next casting video. Good job showcasing behind the scenes material in your videos. 👍🏼
I've been to the Budweiser foundry a few times and they used to give out free samples. This is the first time viewing Edelbrock foundry, very interesting probably no free samples. Thanks for doing this.
very cool. I don't think you can appreciate what goes on in a foundry till you have been in one. I worked at Stahl specialty in Kingsville MO for 9 years. It is the closest thing to hell on earth. we didn't have robots to pour the metal, we had to hand ladle our parts. We cast the oil pan, timing gear cover and flywheel housings for cat and detroit among other things. Awesome thing to be proud of, but took years off my life for sure. Thanks for showing how things are made that people don't normally get to see.
2013 Mini Cooper Clubman. Thanks for taking time to come out to our Pretty little Farm town. Wish I knew you were out here. Anyhow, laaaater
Thank you fro your videos on the manufacturing process. Some home machinist can make parts, some can make them accurately but to make thousands of parts a day accurately is a different animal. I strive to take some of the techniques you show in your videos to make me more more precise as a hobyist. Thank you!
MERRY CHRISTMAS. I JUST RAN ACCROS THIS VIDEO. I WORKED IN A CAST IRON FOUNDRY FOR 10 YEARS, DID EVERY JOB FROM MELTING IRON TO FINISHED PRODUCT. BROUGHT BACK GREAT MEMORYS. AS FOR CARS I HAVE......454 POWERED 1970 PRO STREET MONTE CARLO AND A 2008 4WD CHEVY AVALANCHE WITH EDELBROCK E FORCE SUPERCHARGER. YA JUST GOT A NEW SUBSCRIBER.
Wow really enjoyed your video , VERY interesting to see how the product for which I've been using since the 60s is manufactured and still made in America . Thank you for allowing us to see how it's made.🇺🇲 And Thank you for making these videos 😊
Big operation, very tidy foundry. Thanks for the tour.
You’re welcome Terry!
I’m in South Australia 🇦🇺. I’m a toolmaker. We had a company called Castalloy which cast all of Holdens aluminium components. We also cast the Harley Davison wheels. Unfortunately they closed down but I’ll never forget it.
I love the variety man. Keep it up, I love seeing the subscriber count grow as well when I get a chance to get on here and catch up. Awesome to see you and Logan growing as well.
I appreciate it!
I like the technical info you put in. And I have always been a fan of "how things are made"......
Great content please keep doing them as long as you can. Thank you
I always try to read the comments in any video that's interesting. It's a good way to find out valuable information. I drive a '07 Harley Davidson F150 Super Crew Cab.
Great point!
When i was 19 I got a job in a machine shop with no experience and learned every old school machine in a year. Drill press, radial drill, bridgeport, horizontal/boring mill, etc. Then came the CNCs and that changed production to a new level. I learned Everything CNC in another year. We machined WELDGUN (copper beryllium alloy) castings for automotive production lines. The company eventually had a problem getting casting patterns made fast enough to keep up with CNC production by outside suppliers/pattern makers. They made them out of wood. Very technical shapes with hollow passages inside for cooling when in operation spot welding body parts on production lines. It would take 1-3 weeks to get a pattern from suppliers. We started making patterns in house with a CNC router. They trained me to 3D model/program/ machine via CNC router. We could make 2 or 3 complex patterns per day with that one machine. I got to see the foundry operation that used our patterns so that i could understand the process. It was a filthy place where everything was done by hand. I was so glad i didnt work at the foundry. It was in 1994 . I drew the 3D model from a blueprint in CAD as then apply CAM software to create the tool path for the machine. send it to the machine which carved the pattern out of a bondo like substance in 2 halves. putting the 2 halves together made the full pattern. It was x 5x5 CNC router that carved in 3D and shape or curve you wanted. It was a great learning experience for 5 years. CNC/CAD/CAM is awesome technology. We used "tombstones" on the horizontal CNC machines also. While 1 operation was running the operator would set up the next tombstone. As soon as the one finished it would rotate out and the next one would start. Amazing use of technology to minimize down time and boost production.
I think this was Mitchell's favorite tour!! I don't think I've seen him reach level 11 on the geek-out meter before! Thanks for sharing!
Glad you enjoyed it!
Yes I read the comments as they pop up. And yes any technical information, insight, following the production line and showing each step will be watched with much enthusiasm. Thank you so much for putting these videos together for us to see.
Thanks for that!
Definitely reading the captions/comments. I've got a 2007 Tundra that definitely isn't fast but it's gotten me everywhere I've ever wanted to go in it.
I like seeing everything from materials in to finished product ready to ship and the guys with what used to be white shop coats designing it and showing the shop machinist how to make it. Basically everything you guys have done the only place I have been is Brodix
Very cool they name the machines after Race tracks, glad you got to see Oswego a smaller super speedway in Northern Central NY right in the middle of town about 60 miles from me
Awesome content you two! Please keep them coming. I'm sure we'll keep watchin!
Thank you! Will do!
I used to be a CNC machinist at Caterpillar tractor in Illinois before I retired. For several months I work in heat treat at caterpillar and I cannot imagine the heat that comes off of track links for those big tractors. The heat is unbelievable
The subtitles are awesome and that warehouse reminded me of the 80's Speed Shops that were a chain store across the US,
Can't remember the guys name but he sold everything including Edelbrock and Comp Cams among all things muscle car
I have several of their products in my Plymouth, so it was great to see the factory they were built in! Thanks!
Wow, I drag raced with Mark Campbell here in Edmonton Alberta Canada back in the day. His Dad owned a highly regarded speed shop here in Edmonton.
Thats awesome lol. I thought he had a bit of a Canadian accent!
I drive a 2002 2500hd Silverado and a 2012 traverse for the family trips. Have an 85 and 86 Z28 both rolling projects. And a 95 Honda del sol. Currently working the bugs out of an 04 zx3 for my daughter as a first car. I read whatcha put up brother 😉. Gonna have to scroll through and get some merch to do my part in supporting this channel. Thanks again for all that you do.
thanks man!
I worked in a foundry in Elkhart Indiana. We made firefighting equipment. It was really cool (pun intended). I had made a career move from the Machining department to the Maintenance dept. so I was able to see how our product was made from a solid ingot all the way to a finished part ready to ship.
Met Vic Edelbrock and his daughters in the food line at Road Atlanta years ago. At the time he was running three of Smokey Yunick's Camaros two of which Smokey had scaled and cut down as smaller versions. They were sitting in the Paddock and you could not tell until they put them side by side. "Old School is old, but we ain't all gone yet."
Never been to a foundry but the machine shop is like one I worked in for a well known air compressor company
Yes some of us have actually worked in a Ford Motor Company foundry and been in Holleys! And some or most of us have machined manifolds, heads, transmission housings etc! Love this video!
Very cool!
I was the owner of the company that transported the furnaces and all the machinery used in setting up this foundry. FYI they don't just make Edelbrock parts. They produce castings for whoever so as to maximize productivity and utilization. This was one of Edelbrock" better ideas.
That is true however we had to avoid the other things in the video since those parts typically have NDAs attached to them
Like you, pleased to see original machinery still has a purpose.
Hahaha, I like what you did there!! I did that kind of thing in a book report once. The teacher never commented on my "are you even reading this" sentence right in the middle of it. Of course I read the comments on your videos! I'm currently working on turning the first car that I bought over 20 years ago into an ARA rally car. It is a '76 Toyota Celica. All our other cars are GMs though. A few Camaros, a Corvette, and a few others but my favorite is our '73 Nova. Our main daily driver is a '96 Tahoe.
A 2016 Ford F150 regular cab short bed truck. 👍 Yeah i love all the technical behind the scenes info.👊
I have a 2007 Honda Accord and a 1976 Corvette. You wanted us to tell you what we drive. Yes some of us read things. Keep up he great tours.
Thank you Mike
Oh snap! I didn't know they had a facility in MS. I live less than an hour from the one here in NC. It's cool that y'all are showing the wide spectrum of the performance automotive industry and how it inspires enthusiasts to keep wrenching. Thank you so much.
Thanks man!!
Answering - 1956 Ford f100 with 390 FE and yes it has an Edelbrock RPM 7105 intake. Maybe I'm mistaken but believe they were making the 7105 on the Oswego speedway machine when talking about the tombstone setup. Very cool 😎
I can’t imagine what the heat feels like. This I’m sure is an interesting tour to be a part of.
My wife and I have made the move to an EV6 KIA.
How do you think they make the motor housing and other parts for your wonderful electric car?
All of them use elaborate large die casting and extrusions for the motors.