I've been using smaller utility tractors on a hay farm for about 7 years now. I'm glad to hear you guys call out how important it is that flat or mostly ideal conditions are critical. Even though these modern small tractors can lift this kind of weight, they are very dangerous on any kind of a slope. They just lack the wheel base and the weight. Proceed with caution
I was pretty sure the CK2610 would lift the 4X5 bales. I didn't think it would lift the 6X6 bales. That is a lot of weight 6' out in front of those pins. Impressive.
Honestly. That is absolutely impressive that either of the smaller tractors lifted them. That said I dont know about doing that on a regular basis. I'm no expert but you could hear them straining doing it.
As an owner of a JD 2025R, I am amazed that the CK2510 handled those round bales. I can not lift a round bale in the 2025R I had to push it along with the bucket. Very impressed future Kioti owner.-
I love my DK40SE(slightly heavier than the DK5010) and my buddy and I do some hay in 4x5 hardcores and it has no issue moving them around and loading them. Biggest issue is seeing over the bale at the front to dodge the odd hole in the field. The 6x6's in the video are softcore and probably not much heavier than the hardcore 4x5's, but they still stick out farther so its still a good sized lift. The only issue with the my tractor and the DK5010 is how high they can stack bales in the barn. 3 high is it for 4x5's, where a bigger tractor does 4 high. They can still load 2 high on an equipment trailer or smaller haywagon that we use to load in the field.
I've moved some 6×6 bales with my DK45. I did have a ballast but unloaded them just as easily as Matt was moving them around. I'll always want more tractor, but the DK series has been great.
Thanks for the demo ... been scouring thru RUclips looking for such. Have a MF35 with bucket and a Lg back counter wt. It barely handles 3x3x8 grass hay bales to the height of 4 stacks. Been think'in need to get something with a bit more POWER, a cab, and make sure it can stack the bales. Been trying to decide which would do the things around the 80 ranch here in Wyoming that would do more than the MF35 and JD630 combined. Now think'in the NX5010 or NX5510 Hydro types might the right size. But also leaning to the DK6010SE Hydro. Just need to get with a local dealer and give them the bucket list of duties I want accomplished and see what they recommend. Again .... thanks for the demo.
Could you do some walk throughs of cab tractors in the 30-50HP range? and explain what they capable of in applications? I'm seriously considering driving to buy one from Alabama. I just bought 57 acres. will need to mow about 20 of that, do some gravel road maintenance, possibly build some new trails through some planted pines, prepare food plots, etc. Thanks for your help! Also could you go through some of the packages that you offer?
@@sylvainleger2257 Massey Ferguson. Yet another company that buys other manufacturer's machines, puts their name on it, and hopes people will feel all nostalgic and fuzzy about the "Old Massey 135 grandpa had".
@@LSE_TRACTOR- Massey Ferguson? I didn't know that. I have 29 acres half pasture the other steep wooded. I would like to make my purchase next year on a new tractor. I don't really know a lot about the different ones or sizes out there. All the different dealers I went to said theirs was the best. It gets confusing after a wile. My driveway is 1 mile long gravel, half is very steep and needs grading yearly. What do you think? Im in Tazewell TN
nice, but what bale weights? this says minimal to what these tractors can do, do they \ave any tire ballast? would of been good to see a loader lift only
Thank you for putting this video together. I have a CK2610 TLB. I noticed the backhoe will engage the pressure relief valve when working it but the fel doesn't engage a pressure relief valve when it encounters weight it can't handle. It just stops. Is that normal or is the fel not being provided full hydraulic power? Thanks!
🤔 Troy M, at first blush, I would ask if you are certain that the control levers for the rear hydraulic remotes are in the neutral position. If activated, even without being used, the hydraulic ability of the loader will suffer.
@@LSE_TRACTOR Thank you I appreciate the quick response. That makes sense to me now because the pump wouldn't be delivering power to the rear remote for the hoe at the same time so with it in the middle it will divert full power to the FEL.
@@LSE_TRACTOR It took me almost 3 years to buy a tractor. I looked at every comparable model to the CK2610 and even test drove the Mahindra, which the dealer I went to also sold. A big point that I don't see many people mention is the integrated loader control valve next to the right fender. All of the tractors had a lever up near the top of the FEL which is awkward and almost none of the competitors had a loader that could lift the bucket and curl simultaneously or lower and dump. Others didn't have a differential lock which I learned first hand from my tractor that it is an absolute neccessary. There's more reasons coupled with the sheer weight of the tractor that I chose Kioti.
I'm interested in getting a Kioti tractor within the next year and moving hay bales will be one of the chores. Were any of these tractors loaded with Rimguard in back tires? Thanks and have really enjoyed a lot of your videos so far.
No, but by the same token this was done on flat asphalt in perfect conditions that would not be duplicated in an actual farm setting. The tires should be filled.
Paul Nicholls - Pausabni Traders While you may “have” sold Kioti tractors, I do sell Kioti tractors. 346 last year. 240 so far this year. World’s largest selling Kioti Dealer. If I am of the opinion that exercises like those in the video are proper to those machines, it’s probably so. I’ll offer a shout out: have any of my customers damaged axles by carrying bales? Let’s see. Paul, it’s not that I want to be argumentative, but I go through the trouble of making videos, have nearly one million views, and somebody with no “dog in the hunt” offers opinions that are wrong. You have a RUclips channel, and you know what I mean.
Moving large round bales with a small chassis tractor is just plain unsafe and borderline reckless. I understand your comparison here but moving oversized bulky bales with compact tractors is dangerous. You should call it out for what it is, unsafe, and not attempt it. I hope your liability insurance is adequate.
I've been using smaller utility tractors on a hay farm for about 7 years now. I'm glad to hear you guys call out how important it is that flat or mostly ideal conditions are critical. Even though these modern small tractors can lift this kind of weight, they are very dangerous on any kind of a slope. They just lack the wheel base and the weight. Proceed with caution
Thanks guys I actually work for a kioti dealer in west Texas so now I can tell my customers more about these kind of tractors
I was pretty sure the CK2610 would lift the 4X5 bales. I didn't think it would lift the 6X6 bales. That is a lot of weight 6' out in front of those pins. Impressive.
Great video guys. I have a DK4510 and it has been great at 60 hours.
Thank you Luckie
Great video, answers a lot of questions. Thanks for making it.
Honestly. That is absolutely impressive that either of the smaller tractors lifted them. That said I dont know about doing that on a regular basis. I'm no expert but you could hear them straining doing it.
As an owner of a JD 2025R, I am amazed that the CK2510 handled those round bales. I can not lift a round bale in the 2025R I had to push it along with the bucket. Very impressed future Kioti owner.-
I love my DK40SE(slightly heavier than the DK5010) and my buddy and I do some hay in 4x5 hardcores and it has no issue moving them around and loading them. Biggest issue is seeing over the bale at the front to dodge the odd hole in the field. The 6x6's in the video are softcore and probably not much heavier than the hardcore 4x5's, but they still stick out farther so its still a good sized lift.
The only issue with the my tractor and the DK5010 is how high they can stack bales in the barn. 3 high is it for 4x5's, where a bigger tractor does 4 high. They can still load 2 high on an equipment trailer or smaller haywagon that we use to load in the field.
Impressive on all 3 tractors
I've moved some 6×6 bales with my DK45. I did have a ballast but unloaded them just as easily as Matt was moving them around. I'll always want more tractor, but the DK series has been great.
TheMrMcKnight1 Thank you!
6x6 bales dont exist
That little unit still impressed me.
Thanks for the demo ... been scouring thru RUclips looking for such. Have a MF35 with bucket and a Lg back counter wt. It barely handles 3x3x8 grass hay bales to the height of 4 stacks. Been think'in need to get something with a bit more POWER, a cab, and make sure it can stack the bales. Been trying to decide which would do the things around the 80 ranch here in Wyoming that would do more than the MF35 and JD630 combined. Now think'in the NX5010 or NX5510 Hydro types might the right size. But also leaning to the DK6010SE Hydro. Just need to get with a local dealer and give them the bucket list of duties I want accomplished and see what they recommend. Again .... thanks for the demo.
Now that's how you do a "what is this tractor about to do" video
Johnny Turbo Thank you Sir
@@LSE_TRACTOR we are the ones that should be thanking you.. but your quite welcome
Could you do some walk throughs of cab tractors in the 30-50HP range? and explain what they capable of in applications? I'm seriously considering driving to buy one from Alabama.
I just bought 57 acres. will need to mow about 20 of that, do some gravel road maintenance, possibly build some new trails through some planted pines, prepare food plots, etc.
Thanks for your help!
Also could you go through some of the packages that you offer?
bwimbish4 this is Mike Schramke, I’m the owner of Larry Stovesand Equipment. I’m on it! I’ll do it tomorrow.
Larry Stovesand Equipment thank you sir
Buy a massey
@@sylvainleger2257 Massey Ferguson. Yet another company that buys other manufacturer's machines, puts their name on it, and hopes people will feel all nostalgic and fuzzy about the "Old Massey 135 grandpa had".
@@LSE_TRACTOR- Massey Ferguson? I didn't know that. I have 29 acres half pasture the other steep wooded. I would like to make my purchase next year on a new tractor. I don't really know a lot about the different ones or sizes out there. All the different dealers I went to said theirs was the best. It gets confusing after a wile. My driveway is 1 mile long gravel, half is very steep and needs grading yearly. What do you think? Im in Tazewell TN
nice, but what bale weights? this says minimal to what these tractors can do, do they \ave any tire ballast? would of been good to see a loader lift only
Awesome presentation men!
You can also run a 4X5 baler with a much smaller tractor, probably 60 or 70 hp, so your whole operation would be more economical.
60-70 hp being smaller??? You realize these were 25 & 50 hp's right?
Must be doing something right. Number 1 dealer in America
Melanie Keen Thank you
Dam straight
Impressed by the little one.
There is no such thing as a 6x6 round bale. Those are 5x6. No one makes a 6x6 baler.
ditto. All i've ever worked with around here are 5' wide rounds. Never heard of a 6'wide.
I really like your videos! 😎
Cool! :)
GMBN baby! Doddy would approve!
Tractors with missing parts?
Noway you could load bails on a truck with out the Bail on the back to counter balance the loader that far out.
Thank you for putting this video together. I have a CK2610 TLB. I noticed the backhoe will engage the pressure relief valve when working it but the fel doesn't engage a pressure relief valve when it encounters weight it can't handle. It just stops. Is that normal or is the fel not being provided full hydraulic power? Thanks!
🤔 Troy M, at first blush, I would ask if you are certain that the control levers for the rear hydraulic remotes are in the neutral position. If activated, even without being used, the hydraulic ability of the loader will suffer.
@@LSE_TRACTOR I had no idea about that. Thank you. Which position should the selector lever be in when using the front loader? It has three positions.
Troy M both in the center position
@@LSE_TRACTOR Thank you I appreciate the quick response. That makes sense to me now because the pump wouldn't be delivering power to the rear remote for the hoe at the same time so with it in the middle it will divert full power to the FEL.
@@LSE_TRACTOR It took me almost 3 years to buy a tractor. I looked at every comparable model to the CK2610 and even test drove the Mahindra, which the dealer I went to also sold. A big point that I don't see many people mention is the integrated loader control valve next to the right fender. All of the tractors had a lever up near the top of the FEL which is awkward and almost none of the competitors had a loader that could lift the bucket and curl simultaneously or lower and dump. Others didn't have a differential lock which I learned first hand from my tractor that it is an absolute neccessary. There's more reasons coupled with the sheer weight of the tractor that I chose Kioti.
Whats the attachment called the one that goes on the back
I'm interested in getting a Kioti tractor within the next year and moving hay bales will be one of the chores. Were any of these tractors loaded with Rimguard in back tires?
Thanks and have really enjoyed a lot of your videos so far.
No, but by the same token this was done on flat asphalt in perfect conditions that would not be duplicated in an actual farm setting. The tires should be filled.
I think the RK has 5-600 lbs more at the bucket
those are soft core 5x6 bales. try a high density 5x6 lol
Send me one
Larry Stovesand Equipment man I can’t even get my 4x5s made. Was gonna try to cut last week. Nothing but rain. Ridiculous
Kioti ck2610 vs mahindra 1626?
Picking them up is one thing, but your front axle will be needing repair a lot. Even just moving these bales occasionally will damage your tractor.
That may be true on lesser machines, but not on these. You are incorrect.
@@LSE_TRACTOR I have sold Kioti tractor and MF and NH. I know the strengths and limitations. Been doing this for a very very long time.
Paul Nicholls - Pausabni Traders While you may “have” sold Kioti tractors, I do sell Kioti tractors. 346 last year. 240 so far this year. World’s largest selling Kioti Dealer. If I am of the opinion that exercises like those in the video are proper to those machines, it’s probably so. I’ll offer a shout out: have any of my customers damaged axles by carrying bales? Let’s see.
Paul, it’s not that I want to be argumentative, but I go through the trouble of making videos, have nearly one million views, and somebody with no “dog in the hunt” offers opinions that are wrong. You have a RUclips channel, and you know what I mean.
@@LSE_TRACTOR Good for you Larry. Obviously our areas are vastly different.
6x6 bales?????? never heard of that size,only been farming for 40 years. Size is irrelevant only weight is.
He misspoke. That appears to be a 5X5. What is not irrelevant is the ability to move bales.
Yes
The actual video starts at 3:15.
Moving large round bales with a small chassis tractor is just plain unsafe and borderline reckless. I understand your comparison here but moving oversized bulky bales with compact tractors is dangerous. You should call it out for what it is, unsafe, and not attempt it. I hope your liability insurance is adequate.
Wow. Otis, I don't know what to say other than thank you for adding to my nearly 50,000 view count.
@@LSE_TRACTOR That doesn't make it any safer...
It was a demonstration of its limits if a person can't make good judgments for themselves then maybe they should stay in there moms basement hahaha
You guys are not safe .I can see you have little experience in moving round bales .made me nervous watching you