I don't read Russian , but from the code it would seem the Photo resistor reads the ambient light and adjust the brightness of the ambilight when running, seems like a nice idea.
very good looking job. i will do similiar but maybe ill use rotary switch to control brightness against light sensor and there will be no need to make power on/off things
I am a simple electrician, everything I got but where is data signal of video, mean from where it gonna sense video signals, it's not shown how to connect from HDMI, plz tell me that so I can make this project for my TV
Crime Master Go Go it looks like that second program he installed is detecting what colors are on the edges of the screen and transmitting that data to the arduino via usb. I would assume that program has to run all the time, but it would also mean you don’t need to run an hdmi into the arduino.
Can you modified or tell me what I need to remove or change in the sketch in order to remove any flashing or any led lights turning on while waking or turning on computer. Ideally I want leds to turn on only when i start ambibox screen grabbing
Здравствуйте. Я не понимаю, как трудно показать цвета на экране, если у вас нет устройства видеозахвата. Как он это делает? Ты можешь это объяснить? Спасибо.
Прошу помощи, может кто то сталкивался с такой проблемой .Лента поделена на 4 куска и конечно же направление у ленты правильное , так вот в чем проблема 4 кусок (16) диодов живут сами по себе, то моргают то вообще не святят, соединений проводов проверял, такое чувство что сигнал не доход од ардуинки((((((((((((((
Because the white colour is being produced by colours red blue and green and most led strips are not colour balanced the way your monitors leds are, there is settings to try to get true white but with RGB its kind of hard. If you get a RGBW strip it would be a lot better as you have a dedicated led for white.
![Gucci Mane & Sexyy Red - You Don't Love Me [Official Music Video]](http://i.ytimg.com/vi/j7IBqyFKT4c/mqdefault.jpg)
video begins
first thing i see: resistors
me: ok im out
I don't read Russian , but from the code it would seem the Photo resistor reads the ambient light and adjust the brightness of the ambilight when running, seems like a nice idea.
whats your background wall color?
very good looking job. i will do similiar but maybe ill use rotary switch to control brightness against light sensor and there will be no need to make power on/off things
Can we use node MCU esp8266 instead of Arduino?
very nice tutorial and i can tell because i've seen many about this topic
Video name please
What is the function of the Photo Resistor ?
Its like a regular resistor, but the resistance varies depending on how much light hits the sensor
Video name
Will this work on a TV with the audrino doing it all
no
Yes, certainly
Use a HDMI splitter for it + a Raspberry Pi
What does photo resistor do?
it might alter the intensity of the light....like when the room is dark the intensity would be low and vice versa
it's for the remote I think
@@yuktabhardwaj7554 well makes sense
@@lfcbpro a photoresistor for a temote lol
it is only for pc or works on TV?
with an HDMi input you can send to arduino the video pixels for the leds
I am a simple electrician, everything I got but where is data signal of video, mean from where it gonna sense video signals, it's not shown how to connect from HDMI, plz tell me that so I can make this project for my TV
Crime Master Go Go it looks like that second program he installed is detecting what colors are on the edges of the screen and transmitting that data to the arduino via usb. I would assume that program has to run all the time, but it would also mean you don’t need to run an hdmi into the arduino.
Its not connected on hdmi, its run with computer program ang arduino via usb port
You can use a Arduino nano it's simpler
Can you modified or tell me what I need to remove or change in the sketch in order to remove any flashing or any led lights turning on while waking or turning on computer. Ideally I want leds to turn on only when i start ambibox screen grabbing
Здравствуйте.
Я не понимаю, как трудно показать цвета на экране, если у вас нет устройства видеозахвата.
Как он это делает?
Ты можешь это объяснить?
Спасибо.
What is the brown stuff you use on the corners?
A black sillicon
what video footage ?
I would love this for pc gaming but don’t have the time or skills to soldier lol
Lipa panie, kolory się nie zgadzają. Spójrz na 6:49 , 7:00 , 7:17 , 7:22 , albo inne. Lipa.
I have the same monitor ^^
Music name please !
Прошу помощи, может кто то сталкивался с такой проблемой .Лента поделена на 4 куска и конечно же направление у ленты правильное , так вот в чем проблема 4 кусок (16) диодов живут сами по себе, то моргают то вообще не святят, соединений проводов проверял, такое чувство что сигнал не доход од ардуинки((((((((((((((
Ur title is on english but everything written on ur pc/language is in russian. Thumbs down for that. 👎
u r right. its pretty stupid actually
it simple to make
Your colours are off @7:22 white is blue and even your black is blue wth is up with that?
Because the white colour is being produced by colours red blue and green and most led strips are not colour balanced the way your monitors leds are, there is settings to try to get true white but with RGB its kind of hard. If you get a RGBW strip it would be a lot better as you have a dedicated led for white.