If you're doing this I URGE you to make sure that your patches are properly extracted into the patches folder. I didn't the first time and noticed that nothing was actually extracted into them so when I did the installation process, everything went somewhat smoothly until I connected my phone and nothing happened. I then uninstalled MIB from the porsche and properly extracted the patches into the patches folder and redid the entire installation. BOOM NOW IT WORKS THANK YOU!!!
Worked like a charm... a couple of things I ran into. 1- The SD update would not auto-run until I fully turned the car on 2- The green would not activate unless I pressed the Car and Tuner button the entire time, otherwise it'd go back to the Home screen 3- After the the patch_unit_aio process finished, it gave a few errors but then said "You can now go back" I plugged my phone in and it worked! Thanks for sharing this info!
*SD card inserted But under Select Source of Software Update Menu, SD slot 1&2 are empty..... Did i copy the files incorrectly? Or simply my Macan couldnt read this SD card? Or my PCM version is below 4.0?
@@cheejunyronsen6071 If you haven't used the slots for a while, dust might build up and interrupt the connection. I'd use some dust cleaner to clear it out and reinsert the SD card in Slot 1. Remember to press the Tuner and Car buttons simultaneously to activate.
Just updated my 2017 boxster using your video... Not everything was exactly the same during the install process, but figured it out and it worked like a charm! Thank you so so so much for putting this video together!
@@DavisBrown-k7t you have to extract all the files to the root of the SD card, I had the same problem. Make sure the files are not one folder layer down, you have to take them out of the extracted MIB folder.
Worked on my 2018 Macan S! Just wanted to drop a quick note to say a massive Thank You! Your help was like having the perfect cheat code for a challenging level - it made everything so much smoother. If gratitude were a stat, you’d definitely have maxed it out! May your WiFi be strong and your batteries always full.
Worked like a charm, did it on my Macan 2017 and works perfectly! A couple of details regarding the software update were different but overall 10/10! Appreciate the help!!
Hooray! After 3 days of using other sites and resources, your description and files finally got it to work on my 2018 Boxster!!! This is by far the best walkthrough I've found. Thank you.
Thanks you Devarious! This worked amazing. Just like the other comments, remember to extract the patch files and copy them into the same directory as "copy patch here". EXTRACT them, otherwise, it won't work! Thank you so much for this video! Rejuvenated my new car with this technology!
Thank you for putting in the effort to research and share this amazing upgrade. I agree this should be a paid video. A million thanks. I erred in not putting the patch in the path folder. But once I realized the mistake it loaded perfectly and I got the GREEN Success screen! Again a million thanks.
Outstanding! Bravo. I’ve been trying to pay to get CarPlay added to my car and it was in there the whole time. Thank you for showing us how to make it come alive!!!! If I knew how, I’d send you a nice bottle as a thank you.
Macan 2016 with PCM4.0 also works. Everything works wonderfully. Applecarplay, AndroidAuto, lifetime maps. Note: It has Bose sound and everything worked great... Thanks for the video.
Ok everyone... i feel so ashamed. First of all - it works awesome! After doing the updates for several times and no android icon would show up on the mainscreen of my porsche macan 2018..., I thought its not working.... Well ladies and gentlemen.... I never tried to connect a phone after the install.... The android icon on the cars display will only show up after connecting a phone by usb on the usb port below your armrest..... There will be no android icon if a phone is not connected.... I feel so much like an i..iot.... 😂😂😂 Well thanks a lot to you here posting this video... Works great! 0:01
This is a great tutorial. I want to add because I had the same issue and questions that others had being a tech guy. The usb stick does not work because when you get to the "Gem" menu, the USB drive is not recognized by Gem. So you must have a SD card in SD slot 1. I tried many work arounds before eventually caving in and buying an SD card for the slot. Save yourself some time and trouble. If someone else finds a workaround let me know but I have not found the USB port method to work.
I have a 2017 Macan and a 2016 Cayenne. The factory head units look identical to the example in your video. I will be trying this in both vehicles this weekend
Your channel holds great promise, yet it seems to be craving more growth. I've noticed the quality of your content is commendable. I'm confident that with the right strategies, you can enhance your channel's visibility and reach. Let's explore ways to amplify its impact together!
@@doctordevarious it worked like a charm just now, it's insane, and i'm myself a sofwtare engineer, this baffles my brain, i was like (there's no way it works as i already got apple carplay enabled but not android) damn how i lied to myself. Just a weird behavior but once the 3 reboots happend, there was a "1 (OK) 0 (NO) 0 (NOK)" and I though it was asking me to click 1 as the script was at (0%) (indeed, I couldn't click on any 1 button because there was none..) but I guess it was just the confirmation message that everything got installed. I was septic at first that it was some kind of malware but I honestly trusted you from a to z although in the corner of my brain there was a big red light saying - why would someone be willing to give so much time and effort in explaining something liek that ? either to get something in return or probably willing to get his VIP spot in heaven - I opted for the second option.
Great video very helpful but unfortunately didn't work on my macan 2016, option on the pcm show smartphone link for apple car play active but when plug in didn't launch carplay, i try with different cable but doesn't work
Worked with my 2020 Porsche Panemera! initially my Apple car play screen was half sized and now its full screened out perfectly nice!!! Still figuring out Android auto though. Its likely that i needs a specific wire for it to work. Tried wireless anroid auto but it keep on glitching. For those doing it with a newer model or a panamera. The differences for me are: - When inserting the sd card, the sd card reader is found in the glove compartment. - when the MIB was automatically installed, it finished at a screen of devices. I just went all the way and pressed continue/update. It will probably ask you to backup but I pressed cancel backup. It will then reboot for the third time. -afer the that, I waited 2-5 min then the secret buttons to access the MIB launcher, press the knob rotater button + Source, IN THAT ORDER. Then boom you made it to the launcher! -To update from there, scroll to aio setup access or the selection that incldues the word aio. Go to activate carplay then from there press install apple carply/android auto. After that, you should have a full apple carplay screen and posaibly android auto if you have the right wire for it.
@@jonathanmoorman554 yep, and there's a threat I've posted over on the MIB GitHub to contact the main group to get this resolved. I don't own or maintain any of the sites so there isn't much I can do.
Unfortunately I couldn’t get this to work on my 2017 macan. It did start update automatically but I got sent to a list devices screen… Once I confirmed and continued I got stuck in a loop of rebooting and going back into that screen
Hi ! So helpful. The system recognizes my android auto, however, nothing happens following that. When I check the system (car+tuner) matrix screen, it does state that there are missing files, such as "FW is not yet known to MIB" and tells me to copy MH12_US_POG11_K3300_MU0809_PATCH to SD card." What to do? thxx!
Hi Doctor!! I did everything all good I even got a big green screen saying SUCCESS !! Connected the iPhone using USB and nothing. Tried 4 different cables and two phones and nothing. Any Ideas? Thanks
Hey, great video. So, I tried all the steps, and when the system starts updating, on the second update cycle, it gets stuck at 0% and then pops a screen that says "Start backup Dcoumenttion" and "connect diagnostic device to perform backup documentation. Cancelling results in entry in fault memory and restart". And, when I cancel backup, it goes to home screen and the patch via GEM starts but eventully says "no patch folder found". So, I guess the initl update cycle never completed? Any thoughts?
Hello, thanks for the guide! I am struggling though.. Formatted my 4gb sd to fat 32 Downloaded newest version from 1st link and extracted to sd card Downloaded patches from 2nd Extracted to patches folder in sd card Renamed file Sd card into macan Turned on car and then nothing Tried to manually update but sd card was blanked out. Please can I have some help? Thank you
Appreciate the work put into the video, but it seems like the second site has been down for a bit. Would it be possible to send a link with the contents of the patches folder? Thanks.
@@ShollKee1 I can try to get this at some point, but my vehicle was programmed months ago so the version may have changed. Honestly I'd reach out to the guy hosting the website -- github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash
@@HenryGrant There is a GIT issue put in place currently. I would subscribe or comment on it for updates. github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/issues/589
@@doctordevarious The site is back up! I tried to install the software, but had some issues. I managed to install MIB and went thru the green menu twice to install the patches. Looking at the logs in the backup folder, it seems to have installed CarPlay. There is an option for Smartphone link now, but I get the message "No device connected - Connect your phone via USB to use Apple CarPlay". I used two different cables and two phones to try the connection, but it still didn't work. Do you have any advice for this?
Good afternoon. I hope you are still checking on these comments. I just purchased a2017 Macan Base w/out CarPlay and attempted these steps several times. I am not sure what I am doing wrong but when I go to the car (as described in the video), it does not start the update automatically nor does it show that I have an SD card when I try to update manually (and it is in SD1). HELP! I feel like I am capable of making this happen but it's just not working for me. Thanks
@@doctordevarious I am using a mac and a 32 GB SD card. But I formatted it to FAT32 using Disk Utility. Added MIB files like in video directly to the SD card. Then added the patch files directly to the SD card (after I "unzipped" them. I would take any advice beyond your awesome video. I feel I'm missing a step.
@ I saw that. I have tried several things to reduce it to 8GB on Mac - googled and RUclips it. Having hard time finding instructions. I will look further or find a windows machine. Thank you
Can anyone help with this? I've been looking everywhere, posting in different places and not getting any answers. I got the software installed. When I plug my phone in, it asks me if I want to use Android Auto, which I say yes to. Then nothing happens. I've used AA on many vehicles and normally, the screen changes over to AA. That doesn't happen. Have also tried different cables. Driving me crazy as it seems as if it should work.
Hey.. I get that you are not tech support and I have no basis to expect any further help other than this great video. But since you seem like such a helpful guy... I'm having trouble connecting to the 2nd website.. the one with the patches. I'm getting a 1033 Argo tunnel error. The only advice for visitors is to try again in a few minutes
2017 Macan GTS. CarPlay came with it when i bought it. Executed all the steps listed above and connected android phone via USB. The PCM does not see the device. Scrolled up in the green screen and have the following notes: >CarPlay & Android Auto activated now >Enable AndroidAuto and Boardbook button image support on POG11 >File Checksum does not match. No patch applied I did receive a couple of notes as it finished: >2. Wrong ifs-root-stage2 is flashed to unit >3. Train/MU is not correct Actions: 1. Check Train/MU 2. Install FW again to get stock ifs-root-stage2 on unit >you can go back now… And that’s where it leaves it and i click “home” to get back to the main screen.
Fixed and works like a charm! Did the whole thing over again (downloads and all). Used the 3.7.1 pre-production. I like the additional notification screens and scripts. Added a wireless dongle and the nine-volt MagSafe charging pad and the wife is happy (I’m CarPlay, she’s AndroidAuto). Thanks again for the awesome video and research. You rock.
Question for everyone here, can the files or patch work on a Mac without an issue or do I need a WIn computer to do this? I would very much appreciate you guys' input! Thank you all!!!!
My 2017 Macan S has MHI2_US_POG11_K3300. Nothing seems to happen when I put the SD card in and turn the car on. When I try to load the update with the SD card it won't let me select SD1, but I still get a notification when I insert the SD card. Does this work with my version?
I'm stuck. Followed everything but, when I got to the part where we go into the tech menu there should be an update selection. I didn't see it shown in the video but I do not see it on my end. I'd like to just start over but now I can't get it do it over. Not sure if there is something I should reset or whatever. Anyone got any suggestions? Thanks.
Hi! This video is AWESOME! I will be doing this process this weekend. Quick question, is this a one time solution or would I need to update my PCM with the latest version via this process every so often? Thanks so much!
I went through all the steps and at the end nothing seemed to have changed. Even though at the beginning it told me Apple CarPlay and Android Auto were activated, they don't actually work. I did see a screen at the end that said to "Copy folder MHI2_US_POG11_K3300_MU0809_PATCH to SD card", but I don't see that specific folder when I download and unzip the patches from the MIB Solution link in the description. Also, do we need to grab a separate folder for the navigation map update and put it on the SD card? at the MIB Solution link I see a separate set of folders called "Maps", separate from the Patches. I'd love someone's help!
I was able to get it to work. In the patch files their should be one that almost matches the firmware number you need, but instead of a K3300, it has P3300. Change the "P" to a "K" in the file name and try it again. Worked like a charm for me.
Thank you for taking the time to make this video! I'm trying to do it on my 2018 Macan S. However, nothing is happening when putting it into the SD drive and starting it. I cannot get it to see the SD cards if I try to do manual software update. How do you determine what version PCM you have? I've searched all over and nothing out there telling me how to find this. Trying to figure out if I have PCM 4 and if that might be the issue. I've done the downloads and loaded them onto an SD card. You mentioned partitioning to a smaller partition. I didn't do this. Would that be the reason the car isn't seeing the card? I extracted the first software to the root on the SD card. The second I put into the Patches folder. I tried just extracting what comes from the second download into there, didn't work. Tried copying the folders that were extracted directly into the Patches folder (took them out of the folder it extracts to). Still no go. Just trying to figure out what I'm doing wrong here. Read through tons of comments but can't figure it out. Want to do it on my wife's 2017 Cayenne as well (same stereo). Thanks!
@@GadgetRick 1. PCM can be found in your infotainment section, I think under vehicle info or something. An 18 should be PCM 4 2. Yes you have to format it to the size I've listed, it cannot read cards with larger sizes. You'll need to follow all steps I've listed.
@@doctordevarious thank you! Will give this a shot! Oh, what about the files. Still not clear on whether I have to copy the folder with the folders for patches into the patches folder or copy the folders directly into the pathes folder (not in the original folder). If that makes sense...
@@GadgetRick Website 1 extracts to the root of the SD card. Website 2 extracts all of the patches content within to the inside of the patches folder of the SD card.
Sorry to bug you but got into the GEM menu. You say to scroll down and we should see an update selection. There is no update selection. I did go into the path_ubit_aio section like you showed on the video but no update and not sure what I'm supposed to select. So close....
@@doctordevarious Ah too bad. Not worth risking it on mine then, unless there is a confirmed way to do this soon. Really struggling without Android Auto after having it for so many years on my older cars!
Just in case you haven't heard of Innovative soft...I went with that outfit, a guy named Raymond, and it worked. It cost around $500 IIRC. I probably would have tried self-programming if I could have found something. '20 Base with Bose. BTW - this is a great video!
Ok, figured out how to do installation again. Found some more info online, got it installed, etc. Now, I plug in my Pixel 8 Pro, car sees it, asks if I want to use Android Auto (I say yes) and then nothing happens. No access to Android Auto. It's installed on my phone of course. It just acts like it's not there even though it acknowledged it was connecting. Any ideas from anyone? Thanks.
hey, I've tried it on Macan 2017 and I successfully reached to enter the green menu + patching it. Once it said "you can go back now" and it was done, I went to HOME screen and plugged in my iPhone but it didnt worked... tried with both USB ports and different cables... only charging and the icon of AndroidPlay is not popping up on home, any ideas?
Once the update has been performed, when I press the car+tuner button the green screen does not appear Will you be able to help me? My version of PCM is MHI2_ER_POG11_P3299 and Software MU is 0807 Thanks
Quick question. Does yours have the BOSE sound system? If yes, does the sound and everything work correct? I’ve heard some have gotten their BOSE sound screwed after MIB update/patch
@@gagiibakiji8613 this used to be an issue, it is not anymore. Especially if you use up-to-date patching. I have zero issues with this online, the system definitely still thumps lol
ok... I did the whole process. it says also everything is installed properly when checking - but there is no icon on the main screen to activate. Did I miss maybe something? Irestored all and did it again - no error messages - checked again status in the green menue - it says installed and active - but there is no icon... thanks a lot
@@doctordevarious lol - cant find the option in the settigs - there is just an option to connect smartphones - the standard... appleplay - no android. can you guide me somehow through the menu - or is there an advanced standard menu hidden somehow? thx again - appreciate it.
Hey. I tried to download this software on my 2017 Porsche Macan S and after the green screen popped up and I clicked okay to download the patches the following message popped up “Possible reasons: 1. Patch folder is not copied to SD 2. FW is not yet known to M.I.B Actions: 1. Copy folder MHI2_US_POG11_K3300_MU0809_PATCH to SD card 2. Share your backup in case no patch is available for this FW yet Missing files/folders - no patch can be applied You can now go back…” I downloaded the patches and copied them over exactly how you mentioned in your video! Apple CarPlay is not working after I plugged my phone, my phone is not being recognized anymore even as “iPod”. Would love it if you can guide me through this, thanks!
@@jungleswings5016 did you take the file from the patches website, extract it's contents, And upload the actual files to the inside of the patches folder? Because the error sounds like you don't have anything in there. Or your firmware is too recent / updated to complete this process.
@@doctordevarious hey, thank you so much for the reply! I downloaded the update that you pointed out, and downloaded all the patch files, coping them into the patch folder. Still don’t know what’s missing! Is there anyway I can contact you directly for some more help, would really appreciate it. Also, my iPhone is no longer being recognized as an “iPod” to play music. Don’t know why!
@@doctordevarious Is it also valid for Porsche Macan from September 2016 with the same radio as the one from 2017 or 2018 or with the same front end? thanks
When I try this after a while the green screen says "Patch can only be applied to stock firmware". So I guess someone else changed it at some point. Any cure for this?
Dealership should be able to flash the version back to an older / stock update. However that update may prevent this jailbreak capability from being performed, just an FYI.
@@doctordevarious Also, when I extract the second folder (patches) into the patches folder of the first file, the folders copy over but not the content within it. Can I simply copy and paste it? the folders that extract over into the patches directory are all empty.
@@doctordevarious I tried everything you did on your video but for some reason it wont pickup the update. I tried it manually and by removing that character you mentioned for it to start automatically and nothing. The only thing I can think of that I may be doing wrong is the extraction part of the files.
@@Livelaughl0ve Look at the button stack. The 17+ has a gap in the middle, the 16 has a top row of buttons the entire way across. They are not the same version of PCM.
@@Livelaughl0ve If you have PCM 4.0 and voice commands, it's the same. In 2016, many Porsches came out with PCM 4.0. If the multimedia front is the same as in 2017 it will work. On mine it worked like a glove. Everything worked very well.
ok, the key bit of info I didn't have was the extract the PATCHES using a 7 zip tool, which I had to download and install in my computuer. then, extract all and copy over to the MIB patches subfolder... there are a lot of files and takes some time. that was what I missed. I had copied over the .7z file only.
@@MrFezco it sounds like you're missing a step or performing something improperly. I also have the instructions written out in the description that worked for me and countless others in the comments here. I also don't know your vehicle, it's PCM, or your process so...kinda hard to point you in an exact direction.
@@doctordevariousok seems to want to load. But may be stuck at “summary of devices” list. Has a Continue option. Should I select this or just continue to wait? Thanks man.
@@JoseMendoza-p2f I don't believe it will. You will need to format it to 8gb. If you are on a PC you can absolutely format it to 8gb using the Disk Management utility and selecting the SD card from that menu
Disk Management Utility = Create & Format Disk Partition Select SD disk (i.e D:0 / D:1 / D:2) You will see UNallocated partition is VERY small, PRIMARY partition=Disk size (i.e 8gb, 32gb, 64gb, etc) DELETE the PRIMARY partition (right click that partition) Now the UNallocated will be the BIG size, Right-click it, NEW VOLUME , set it to 8,192mb = (1024mb x 8) NOW you have 8GB format :) i feel obliged to help CAUSE this channel owner is very helpful. You smell it? mmmmmmmmmmmm ahhh , good world / good vibes are so contagious
@@christang1936 wired Car Play only. There are aftermarket USB dongles that can allow wireless that you can plug into the USB port inside the center console however.
Hi, has anyone been able to get this to work in Australia? I keep getting”no valid update available on this disc” any ideas fellas?? Cheers, and thanks for sharing this video, your amazing man. Porsche Aus wants $1150 to activate this CarPlay software 😢
I've followed these steps about 100 times and I still have not gotten it to connect or work. I've deleted all the files and redownloaded them all and tried so many times with no luck.
1. Check 8GB SD Card & formatted correctly to only show 8GB active 2. Ensure GEM is downloaded correctly & pasted to the SD card correctly 3. Ensure patches and downloaded, extracted, and pasted to the SD card patches folder correctly. From there this should get you in. Also this only works for PCM 4.0 vehicles.
@@doctordevarious many of the files on the patches ZIP say it could not be extracted because the file type is unsupported.. not sure what im doing wrong. sd card is formatted correctly. any advise appreciated and TIA
@@chansfamily should be in the green engineering menu at the bottom (GEM). If not there is another utility called MIb Toolbox on GitHub that for sure has it.
@@doctordevarious Interesting enough that, I am using v3.6.0 QR Edition and the system shows an message stating "Error during software download. The medium contains no valid update data". I followed all the steps - format SD card in FAT format, extract all file from MIB files to the root folder of the SD card, extract all files from the patch z7 file to patch folder. Any help will be appreciated.
@@doctordevariousI follow all the step except the rename of the file. I try to use the menu to do the update from SD1 where the memory card us. However, the system shows a message "the medium does not contain no valid update data"
@@chansfamily most likely you didn't extract the update contents correctly in the first few steps or your SD card isn't formatted to the correct size or file system.
@@doctordevarious I will give it a try tomorrow again. I am pretty sure the format and extract are good. I will also renew the file and see if the update start by itself.
I do not have a way to verify this. You're free to attempt at your own risk. I feel like there was a comment in here about a non US install but I can't find it at the moment.
Hello I’m also located in Ohio. Anyway I could get you to make me a sd card with the proper files on it. And I’d even pay you for it and to mail it to me. Trying to put CarPlay on my wife’s 2018 macan s
Hey just buying a 2017 macan s with 60k km, it diesnt state that it has carplay or android auto, does it come as standard? I didnt checked with my cable since i didnt had time. Thanks for the video!!
MIH2_JP Mine's Japan car GITHUB only provide ER, US, CN, KR, but not JP Do you know there has been JP release? Love the Video! But also demotivated haha..
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
If you're doing this I URGE you to make sure that your patches are properly extracted into the patches folder. I didn't the first time and noticed that nothing was actually extracted into them so when I did the installation process, everything went somewhat smoothly until I connected my phone and nothing happened. I then uninstalled MIB from the porsche and properly extracted the patches into the patches folder and redid the entire installation. BOOM NOW IT WORKS THANK YOU!!!
How did you uninstall MIB?
Worked like a charm... a couple of things I ran into.
1- The SD update would not auto-run until I fully turned the car on
2- The green would not activate unless I pressed the Car and Tuner button the entire time, otherwise it'd go back to the Home screen
3- After the the patch_unit_aio process finished, it gave a few errors but then said "You can now go back" I plugged my phone in and it worked!
Thanks for sharing this info!
*SD card inserted
But under Select Source of Software Update Menu, SD slot 1&2 are empty.....
Did i copy the files incorrectly? Or simply my Macan couldnt read this SD card? Or my PCM version is below 4.0?
@@cheejunyronsen6071 If you haven't used the slots for a while, dust might build up and interrupt the connection. I'd use some dust cleaner to clear it out and reinsert the SD card in Slot 1. Remember to press the Tuner and Car buttons simultaneously to activate.
@@cheejunyronsen6071 did you ever figure it out?
Just updated my 2017 boxster using your video... Not everything was exactly the same during the install process, but figured it out and it worked like a charm! Thank you so so so much for putting this video together!
curious - what was different? About to try with a 2017 Cayman... lol
I’m trying to do it right now and I can’t get the sd card to update in my car I go to software update and it doesn’t let me click on the sd card
@@DavisBrown-k7t I have this issue too
@@catsfan222 im trying on my 2017 cayman as well. did you sort it?
@@DavisBrown-k7t you have to extract all the files to the root of the SD card, I had the same problem. Make sure the files are not one folder layer down, you have to take them out of the extracted MIB folder.
Worked on my 2018 Macan S!
Just wanted to drop a quick note to say a massive Thank You! Your help was like having the perfect cheat code for a challenging level - it made everything so much smoother. If gratitude were a stat, you’d definitely have maxed it out! May your WiFi be strong and your batteries always full.
Worked like a charm, did it on my Macan 2017 and works perfectly! A couple of details regarding the software update were different but overall 10/10! Appreciate the help!!
Thanks for the detailed install instructions. I just completed this today and it worked perfectly. Thanks again!
Hooray! After 3 days of using other sites and resources, your description and files finally got it to work on my 2018 Boxster!!! This is by far the best walkthrough I've found. Thank you.
I reluctantly went through this and it worked like a charm!
Thanks you Devarious! This worked amazing. Just like the other comments, remember to extract the patch files and copy them into the same directory as "copy patch here". EXTRACT them, otherwise, it won't work! Thank you so much for this video! Rejuvenated my new car with this technology!
Another Success. Installed onto my 2018 Macan Turbo. Thanks for the Video & Instructions
Thank you for putting in the effort to research and share this amazing upgrade. I agree this should be a paid video. A million thanks. I erred in not putting the patch in the path folder. But once I realized the mistake it loaded perfectly and I got the GREEN Success screen! Again a million thanks.
Outstanding! Bravo. I’ve been trying to pay to get CarPlay added to my car and it was in there the whole time. Thank you for showing us how to make it come alive!!!! If I knew how, I’d send you a nice bottle as a thank you.
Hero! Worked in my 2018 Porsche Macan GTS
Macan 2016 with PCM4.0 also works. Everything works wonderfully. Applecarplay, AndroidAuto, lifetime maps.
Note: It has Bose sound and everything worked great...
Thanks for the video.
hey, could you please tell me all your steps you did? glad your way worked... I did everything from the documentation but still didnt worked to me
Sir, you are legend wait for it dary, legendary!!
Ok everyone... i feel so ashamed. First of all - it works awesome! After doing the updates for several times and no android icon would show up on the mainscreen of my porsche macan 2018..., I thought its not working.... Well ladies and gentlemen.... I never tried to connect a phone after the install.... The android icon on the cars display will only show up after connecting a phone by usb on the usb port below your armrest..... There will be no android icon if a phone is not connected.... I feel so much like an i..iot.... 😂😂😂
Well thanks a lot to you here posting this video... Works great! 0:01
I have a macan 2018 but the link to the patch doesnt work anymore. Could you be so kind so send me the patch by email of smth? thanks!!
May both sides of your pillow be cold my friend.
Thank you very much. Both carplay and android auto work great on full sreen on my european Panamera 971.🤩🤩
This is a great tutorial. I want to add because I had the same issue and questions that others had being a tech guy. The usb stick does not work because when you get to the "Gem" menu, the USB drive is not recognized by Gem. So you must have a SD card in SD slot 1. I tried many work arounds before eventually caving in and buying an SD card for the slot. Save yourself some time and trouble. If someone else finds a workaround let me know but I have not found the USB port method to work.
You are an amazing man! Thanks for the info, it worked like a charm!
Thanks so much! I can't wait to try that today :) Will keep you posted. P.S. I recently got the same vehicle 2017 Macan
I have a 2017 Macan and a 2016 Cayenne. The factory head units look identical to the example in your video. I will be trying this in both vehicles this weekend
A massive thank you! Worked like a charm.
Your channel holds great promise, yet it seems to be craving more growth. I've noticed the quality of your content is commendable. I'm confident that with the right strategies, you can enhance your channel's visibility and reach. Let's explore ways to amplify its impact together!
This video should litteraly not be free 🤯🤯😂😂, this is insane Ahah, love you so much Jesus christ, porsche crying right now 💀💀
@@hugodasilva9050 I'm waiting for the letter from them to arrive 🤣
Thanks my friend, much appreciated!
@@doctordevarious it worked like a charm just now, it's insane, and i'm myself a sofwtare engineer, this baffles my brain, i was like (there's no way it works as i already got apple carplay enabled but not android) damn how i lied to myself.
Just a weird behavior but once the 3 reboots happend, there was a "1 (OK) 0 (NO) 0 (NOK)" and I though it was asking me to click 1 as the script was at (0%) (indeed, I couldn't click on any 1 button because there was none..) but I guess it was just the confirmation message that everything got installed.
I was septic at first that it was some kind of malware but I honestly trusted you from a to z although in the corner of my brain there was a big red light saying - why would someone be willing to give so much time and effort in explaining something liek that ? either to get something in return or probably willing to get his VIP spot in heaven - I opted for the second option.
Great video very helpful but unfortunately didn't work on my macan 2016, option on the pcm show smartphone link for apple car play active but when plug in didn't launch carplay, i try with different cable but doesn't work
@@danieledes1226 the 2016 Macan is not PCM 4, it wasn't going to work.
@doctordevarious thanks for the quick reply, does have the same pcm on the video, perhaps in the uk is different spec
Worked with my 2020 Porsche Panemera! initially my Apple car play screen was half sized and now its full screened out perfectly nice!!! Still figuring out Android auto though. Its likely that i needs a specific wire for it to work. Tried wireless anroid auto but it keep on glitching.
For those doing it with a newer model or a panamera.
The differences for me are:
- When inserting the sd card, the sd card reader is found in the glove compartment.
- when the MIB was automatically installed, it finished at a screen of devices. I just went all the way and pressed continue/update. It will probably ask you to backup but I pressed cancel backup. It will then reboot for the third time.
-afer the that, I waited 2-5 min then the secret buttons to access the MIB launcher, press the knob rotater button + Source, IN THAT ORDER. Then boom you made it to the launcher!
-To update from there, scroll to aio setup access or the selection that incldues the word aio.
Go to activate carplay then from there press install apple carply/android auto. After that, you should have a full apple carplay screen and posaibly android auto if you have the right wire for it.
I tried it on my 2018 Panamera and it says the card doesn't have any update files...
Apple CarPlay also only works on half of the screen.
Thanks a lot that works in my Porsche 2018.
Thanks for the video! Like a few others have pointed out the second link no longer works.
@@jonathanmoorman554 yep, and there's a threat I've posted over on the MIB GitHub to contact the main group to get this resolved. I don't own or maintain any of the sites so there isn't much I can do.
Unfortunately I couldn’t get this to work on my 2017 macan.
It did start update automatically but I got sent to a list devices screen…
Once I confirmed and continued I got stuck in a loop of rebooting and going back into that screen
Thanks for doing all this research. Great video!
No worries, happy to help out!
Outstanding video... now i regret getting my 2020 base cayenne instead of the 2018 macan s i was eyeing. I still have no android auto 😅
Thank you, worked great!
awesome. Cant wait to try this update. Ill let u know!! Thxxx
Hi ! So helpful. The system recognizes my android auto, however, nothing happens following that. When I check the system (car+tuner) matrix screen, it does state that there are missing files, such as "FW is not yet known to MIB" and tells me to copy MH12_US_POG11_K3300_MU0809_PATCH to SD card." What to do? thxx!
Hi Doctor!! I did everything all good I even got a big green screen saying SUCCESS !! Connected the iPhone using USB and nothing. Tried 4 different cables and two phones and nothing. Any Ideas? Thanks
Hey, great video. So, I tried all the steps, and when the system starts updating, on the second update cycle, it gets stuck at 0% and then pops a screen that says "Start backup Dcoumenttion" and "connect diagnostic device to perform backup documentation. Cancelling results in entry in fault memory and restart". And, when I cancel backup, it goes to home screen and the patch via GEM starts but eventully says "no patch folder found". So, I guess the initl update cycle never completed? Any thoughts?
Having the same problem. Plz help
Hello any luck I had the same problem??? @the
@@thelostboys565any luck?
@@bagzyzed2792 No unfortunately ran out of ideas. Was hoping to get a reply from the doctor!!
Hello, thanks for the guide! I am struggling though..
Formatted my 4gb sd to fat 32
Downloaded newest version from 1st link and extracted to sd card
Downloaded patches from 2nd
Extracted to patches folder in sd card
Renamed file
Sd card into macan
Turned on car and then nothing
Tried to manually update but sd card was blanked out.
Please can I have some help? Thank you
I had this issue during my first attempt. You may just have an SD card that isn't compatible with the vehicle. Try it on a different one.
Appreciate the work put into the video, but it seems like the second site has been down for a bit. Would it be possible to send a link with the contents of the patches folder? Thanks.
@@ShollKee1 I can try to get this at some point, but my vehicle was programmed months ago so the version may have changed.
Honestly I'd reach out to the guy hosting the website -- github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash
@@doctordevarious Hi! I would also appreciate if you could post the patches folder somewhere while the site is down.
@@HenryGrant There is a GIT issue put in place currently. I would subscribe or comment on it for updates. github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash/issues/589
@@doctordevarious The site is back up! I tried to install the software, but had some issues. I managed to install MIB and went thru the green menu twice to install the patches. Looking at the logs in the backup folder, it seems to have installed CarPlay. There is an option for Smartphone link now, but I get the message "No device connected - Connect your phone via USB to use Apple CarPlay". I used two different cables and two phones to try the connection, but it still didn't work. Do you have any advice for this?
Good afternoon. I hope you are still checking on these comments. I just purchased a2017 Macan Base w/out CarPlay and attempted these steps several times. I am not sure what I am doing wrong but when I go to the car (as described in the video), it does not start the update automatically nor does it show that I have an SD card when I try to update manually (and it is in SD1). HELP! I feel like I am capable of making this happen but it's just not working for me. Thanks
@@chrisbane8143 sounds like your SD card was not setup properly or contents extracted to it correctly.
@@doctordevarious I am using a mac and a 32 GB SD card. But I formatted it to FAT32 using Disk Utility. Added MIB files like in video directly to the SD card. Then added the patch files directly to the SD card (after I "unzipped" them. I would take any advice beyond your awesome video. I feel I'm missing a step.
@chrisbane8143 size needs formatted too. It can't read 32gb. Please rewatch video or use instructions in the description
@ I saw that. I have tried several things to reduce it to 8GB on Mac - googled and RUclips it. Having hard time finding instructions. I will look further or find a windows machine. Thank you
Ok after manually doing the software update it no long reboots randomly, however I can’t seem to enter the GEM by pressing car and tuner button
Hello Dr. Devarious. Could you post a screen shot of the files on the SD card?
Can anyone help with this? I've been looking everywhere, posting in different places and not getting any answers. I got the software installed. When I plug my phone in, it asks me if I want to use Android Auto, which I say yes to. Then nothing happens. I've used AA on many vehicles and normally, the screen changes over to AA. That doesn't happen. Have also tried different cables.
Driving me crazy as it seems as if it should work.
Hey.. I get that you are not tech support and I have no basis to expect any further help other than this great video.
But since you seem like such a helpful guy... I'm having trouble connecting to the 2nd website.. the one with the patches. I'm getting a 1033 Argo tunnel error. The only advice for visitors is to try again in a few minutes
Website errors try incognito perhaps? Or as the website implies try again later. See if the result is the same or changes the next go-around.
@doctordevarious1177 dude! A response in 12-ish hours? You are the man.
@@doctordevarious still no luck connecting to the patcbes. Any suggestions?
2017 Macan GTS. CarPlay came with it when i bought it. Executed all the steps listed above and connected android phone via USB. The PCM does not see the device.
Scrolled up in the green screen and have the following notes:
>CarPlay & Android Auto activated now
>Enable AndroidAuto and Boardbook button image support on POG11
>File Checksum does not match. No patch applied
I did receive a couple of notes as it finished:
>2. Wrong ifs-root-stage2 is flashed to unit
>3. Train/MU is not correct
Actions:
1. Check Train/MU
2. Install FW again to get stock ifs-root-stage2 on unit
>you can go back now…
And that’s where it leaves it and i click “home” to get back to the main screen.
Fixed and works like a charm! Did the whole thing over again (downloads and all). Used the 3.7.1 pre-production. I like the additional notification screens and scripts.
Added a wireless dongle and the nine-volt MagSafe charging pad and the wife is happy (I’m CarPlay, she’s AndroidAuto).
Thanks again for the awesome video and research. You rock.
Question for everyone here, can the files or patch work on a Mac without an issue or do I need a WIn computer to do this? I would very much appreciate you guys' input! Thank you all!!!!
My 2017 Macan S has MHI2_US_POG11_K3300. Nothing seems to happen when I put the SD card in and turn the car on. When I try to load the update with the SD card it won't let me select SD1, but I still get a notification when I insert the SD card. Does this work with my version?
Same yere
I'm experiencing the same thing
Any updates
@@n.woodbury1388 anyone have any luck?
See my comment... I was having that same issue and worked it out. It's simple but I don't know anything about coding so it took a minute to figure out
Many thanks for all the effort but the second link does not work anymore: Error 1033 Argo Tunnel error
I'm stuck. Followed everything but, when I got to the part where we go into the tech menu there should be an update selection. I didn't see it shown in the video but I do not see it on my end. I'd like to just start over but now I can't get it do it over. Not sure if there is something I should reset or whatever. Anyone got any suggestions? Thanks.
Hi! This video is AWESOME! I will be doing this process this weekend. Quick question, is this a one time solution or would I need to update my PCM with the latest version via this process every so often? Thanks so much!
@@janzensmall8518 one time. I did this last December, haven't touched it since.
@@doctordevarious Thanks so much. Appreciate your help!
I went through all the steps and at the end nothing seemed to have changed. Even though at the beginning it told me Apple CarPlay and Android Auto were activated, they don't actually work. I did see a screen at the end that said to "Copy folder MHI2_US_POG11_K3300_MU0809_PATCH to SD card", but I don't see that specific folder when I download and unzip the patches from the MIB Solution link in the description.
Also, do we need to grab a separate folder for the navigation map update and put it on the SD card? at the MIB Solution link I see a separate set of folders called "Maps", separate from the Patches. I'd love someone's help!
I'm having the same issue. I got that exact same message. I wonder if they didn't patch that one. Not sure though
I was able to get it to work. In the patch files their should be one that almost matches the firmware number you need, but instead of a K3300, it has P3300. Change the "P" to a "K" in the file name and try it again. Worked like a charm for me.
Thank you for taking the time to make this video! I'm trying to do it on my 2018 Macan S. However, nothing is happening when putting it into the SD drive and starting it. I cannot get it to see the SD cards if I try to do manual software update.
How do you determine what version PCM you have? I've searched all over and nothing out there telling me how to find this. Trying to figure out if I have PCM 4 and if that might be the issue.
I've done the downloads and loaded them onto an SD card. You mentioned partitioning to a smaller partition. I didn't do this. Would that be the reason the car isn't seeing the card?
I extracted the first software to the root on the SD card. The second I put into the Patches folder. I tried just extracting what comes from the second download into there, didn't work. Tried copying the folders that were extracted directly into the Patches folder (took them out of the folder it extracts to). Still no go.
Just trying to figure out what I'm doing wrong here. Read through tons of comments but can't figure it out. Want to do it on my wife's 2017 Cayenne as well (same stereo).
Thanks!
@@GadgetRick 1. PCM can be found in your infotainment section, I think under vehicle info or something. An 18 should be PCM 4
2. Yes you have to format it to the size I've listed, it cannot read cards with larger sizes. You'll need to follow all steps I've listed.
@@doctordevarious thank you! Will give this a shot!
Oh, what about the files. Still not clear on whether I have to copy the folder with the folders for patches into the patches folder or copy the folders directly into the pathes folder (not in the original folder). If that makes sense...
@@GadgetRick Website 1 extracts to the root of the SD card. Website 2 extracts all of the patches content within to the inside of the patches folder of the SD card.
Sorry to bug you but got into the GEM menu. You say to scroll down and we should see an update selection. There is no update selection.
I did go into the path_ubit_aio section like you showed on the video but no update and not sure what I'm supposed to select.
So close....
@@GadgetRick sounds like patches aren't in the right spot or setup as this is a patch menu item
Hi, the small screen display in the car dashboard (instrument panel) can´t use Android Auto, right?
Correct. Nothing we do here touches that display
Great video! Would this work on a 2020 Macan? My PCM is the large wide screen version so i assume 5.0.
@@TheMoose22 you have PCM 4.1 (or PCM 5). This method is for the 17 and 18 for sure. I haven't seen info on how to add to the 19+
@@doctordevarious Ah too bad. Not worth risking it on mine then, unless there is a confirmed way to do this soon. Really struggling without Android Auto after having it for so many years on my older cars!
@@TheMoose22 same boat. looking for a successful install on MY2020 Macan
Just in case you haven't heard of Innovative soft...I went with that outfit, a guy named Raymond, and it worked. It cost around $500 IIRC. I probably would have tried self-programming if I could have found something. '20 Base with Bose.
BTW - this is a great video!
Hi! How do I get the links to put on the SD card?
@@RachelHuntress everything is in the video description.
Ok, figured out how to do installation again. Found some more info online, got it installed, etc. Now, I plug in my Pixel 8 Pro, car sees it, asks if I want to use Android Auto (I say yes) and then nothing happens. No access to Android Auto. It's installed on my phone of course. It just acts like it's not there even though it acknowledged it was connecting.
Any ideas from anyone?
Thanks.
hey, I've tried it on Macan 2017 and I successfully reached to enter the green menu + patching it.
Once it said "you can go back now" and it was done, I went to HOME screen and plugged in my iPhone but it didnt worked... tried with both USB ports and different cables... only charging and the icon of AndroidPlay is not popping up on home, any ideas?
I had that same issue... Told me it was done and I could go back, but it wasn't working. Check out my comment if you still need help.
Go on your usb settings on your phone, connected devices and change connection type to "usb/android auto"
@@Ak-so6ngI dont think there is such option for iPhone
Does it work for Macan S 2016? Anyone try it
Once the update has been performed, when I press the car+tuner button the green screen does not appear
Will you be able to help me?
My version of PCM is MHI2_ER_POG11_P3299 and Software MU is 0807
Thanks
Could not get the tuner and car key to bring up the green screen
Hi.. Do you know if works for earlier models? 2015? Thanks
@@Ahmadaboudi it will not.
@@doctordevariousThanks a million for the quick response
Would this work on a 2021 macan s with the new PCM, scared of triying for now...
@@KE0PS77 no. That is PCM 5.0
Quick question. Does yours have the BOSE sound system? If yes, does the sound and everything work correct? I’ve heard some have gotten their BOSE sound screwed after MIB update/patch
@@gagiibakiji8613 this used to be an issue, it is not anymore. Especially if you use up-to-date patching. I have zero issues with this online, the system definitely still thumps lol
ok... I did the whole process. it says also everything is installed properly when checking - but there is no icon on the main screen to activate. Did I miss maybe something? Irestored all and did it again - no error messages - checked again status in the green menue - it says installed and active - but there is no icon... thanks a lot
@@heyzeussunjazz4660 check settings in the Porsche screen itself. Ensure Apple Car Play and Android Auto are enabled
@@doctordevarious lol - cant find the option in the settigs - there is just an option to connect smartphones - the standard... appleplay - no android. can you guide me somehow through the menu - or is there an advanced standard menu hidden somehow?
thx again - appreciate it.
Hey. I tried to download this software on my 2017 Porsche Macan S and after the green screen popped up and I clicked okay to download the patches the following message popped up
“Possible reasons:
1. Patch folder is not copied to SD
2. FW is not yet known to M.I.B
Actions:
1. Copy folder MHI2_US_POG11_K3300_MU0809_PATCH to SD card
2. Share your backup in case no patch is available for this FW yet
Missing files/folders - no patch can be applied
You can now go back…”
I downloaded the patches and copied them over exactly how you mentioned in your video! Apple CarPlay is not working after I plugged my phone, my phone is not being recognized anymore even as “iPod”. Would love it if you can guide me through this, thanks!
@@jungleswings5016 did you take the file from the patches website, extract it's contents, And upload the actual files to the inside of the patches folder?
Because the error sounds like you don't have anything in there. Or your firmware is too recent / updated to complete this process.
@@doctordevarious hey, thank you so much for the reply! I downloaded the update that you pointed out, and downloaded all the patch files, coping them into the patch folder. Still don’t know what’s missing! Is there anyway I can contact you directly for some more help, would really appreciate it. Also, my iPhone is no longer being recognized as an “iPod” to play music. Don’t know why!
I had the same issue, see my comment for the solution
Which patch should I put in the "Patches" folder for Porsche Macan 2017?
Thanks
Everything downloaded from the patches link goes in.
@@doctordevarious Is it also valid for Porsche Macan from September 2016 with the same radio as the one from 2017 or 2018 or with the same front end?
thanks
Hi @doctordevarious1177, I only got one file which is named 20230926_M.I.B_Patches.7z
thank you, would this work on my 2019 macan to get it to be full screen?
Negative. Works on PCM 4.0 only.
That second link doesnt work for me :( It says Bad Gateway
Unable to replicate, just pulled it up on mobile. Look thru your local internet setup
@@doctordevarious I was able to try again a while later and it worked :)
Works for 718 Boxster 2017?
@@GabrielContato looks to be PCM v4.0. This should work but I can't verify accurately as I don't have one in front of me to replicate.
When I try this after a while the green screen says "Patch can only be applied to stock firmware". So I guess someone else changed it at some point. Any cure for this?
Dealership should be able to flash the version back to an older / stock update. However that update may prevent this jailbreak capability from being performed, just an FYI.
Would this work on a 2018 Porsche Macan base?
Edit: it worked for me!
@@Ak-so6ng this should as it is PCM 4.0. I cannot verify however as I only own a 2017
@@doctordevarious Also, when I extract the second folder (patches) into the patches folder of the first file, the folders copy over but not the content within it. Can I simply copy and paste it? the folders that extract over into the patches directory are all empty.
@@Ak-so6ng Yes, any content in the Patches file needs to be placed inside the Patches folder of the SD Card.
Will this method work on the Cayenne of the same year, do you know?
I do not believe so. The 2017 interior has the same one I've shown on the right at 02:53 which is. PCM 3.1 install.
I Have version MHI2_US_POG11_P3300 does that mean I have PCM 3? Thanks in advanced!
You shooooould be fine to proceed. If it's not able to run the GEM it'll let you know.
@@doctordevarious I tried everything you did on your video but for some reason it wont pickup the update. I tried it manually and by removing that character you mentioned for it to start automatically and nothing. The only thing I can think of that I may be doing wrong is the extraction part of the files.
Is it also valid for Porsche Macan from September 2016 with the same radio as the one from 2017 or 2018 or with the same front end?
thanks
???
'16 Macan had the PCM 3.1 head unit, not the 4.0 one shown in my video
The one 16 macan I’m looking at has the same as yours also like the commenter was saying
@@Livelaughl0ve Look at the button stack. The 17+ has a gap in the middle, the 16 has a top row of buttons the entire way across. They are not the same version of PCM.
@@Livelaughl0ve If you have PCM 4.0 and voice commands, it's the same.
In 2016, many Porsches came out with PCM 4.0. If the multimedia front is the same as in 2017 it will work. On mine it worked like a glove. Everything worked very well.
Do I have to use SD card, or I can do it with USB flash drive?
@@Authentic-Bulgaria SD Card
ok, the key bit of info I didn't have was the extract the PATCHES using a 7 zip tool, which I had to download and install in my computuer. then, extract all and copy over to the MIB patches subfolder... there are a lot of files and takes some time. that was what I missed. I had copied over the .7z file only.
@@MrFezco it sounds like you're missing a step or performing something improperly. I also have the instructions written out in the description that worked for me and countless others in the comments here.
I also don't know your vehicle, it's PCM, or your process so...kinda hard to point you in an exact direction.
@@doctordevarious it’s exact same as yours. Trying again after swapping SD card.
@@doctordevariousok seems to want to load. But may be stuck at “summary of devices” list. Has a Continue option. Should I select this or just continue to wait? Thanks man.
Waited 5 minutes. Pressed Continue now says Start backup documentation and seems stuck again. Any ideas?
I canceled the backup and it rebooted for third time. No confirmation of update
Quick question: Can this be done through a Pendrive as well? You know what I'm going to try that and update here so it helps others.
@@pavitardua839 has to be an SD card inserted into that slot to take the firmware update
I couldn’t format the sd card, do you know if it will still work, if using a higher than 8gb card?
@@JoseMendoza-p2f I don't believe it will. You will need to format it to 8gb. If you are on a PC you can absolutely format it to 8gb using the Disk Management utility and selecting the SD card from that menu
Disk Management Utility = Create & Format Disk Partition
Select SD disk (i.e D:0 / D:1 / D:2)
You will see UNallocated partition is VERY small, PRIMARY partition=Disk size (i.e 8gb, 32gb, 64gb, etc)
DELETE the PRIMARY partition (right click that partition)
Now the UNallocated will be the BIG size, Right-click it, NEW VOLUME , set it to 8,192mb = (1024mb x 8)
NOW you have 8GB format :)
i feel obliged to help CAUSE this channel owner is very helpful. You smell it? mmmmmmmmmmmm ahhh , good world / good vibes are so contagious
Does this allow for wireless carplay? Or does your phone need to be connected via the wired cable?
@@christang1936 wired Car Play only. There are aftermarket USB dongles that can allow wireless that you can plug into the USB port inside the center console however.
Hi, has anyone been able to get this to work in Australia? I keep getting”no valid update available on this disc” any ideas fellas?? Cheers, and thanks for sharing this video, your amazing man. Porsche Aus wants $1150 to activate this CarPlay software 😢
Could be region issue, unsure. Could also be incorrect format on SD card, update not copied into SD card appropriately.
That second link is now asking for a password? How can I get those patches?
Rewatch the video. 05:42
I've followed these steps about 100 times and I still have not gotten it to connect or work. I've deleted all the files and redownloaded them all and tried so many times with no luck.
1. Check 8GB SD Card & formatted correctly to only show 8GB active
2. Ensure GEM is downloaded correctly & pasted to the SD card correctly
3. Ensure patches and downloaded, extracted, and pasted to the SD card patches folder correctly.
From there this should get you in. Also this only works for PCM 4.0 vehicles.
See my comment, you may have had the same issue as me
@@doctordevarious many of the files on the patches ZIP say it could not be extracted because the file type is unsupported.. not sure what im doing wrong. sd card is formatted correctly. any advise appreciated and TIA
Anyone know where that “UPDATE” button is for the menu?
Shown at 09:29. See the Patch Now button. You will press in on the dial here.
@@doctordevarious i figured it out between santrix’s and your video….
You have to hit Flash patched image | add FECs | CP/AA coding ]
@@doctordevarious Thanks for the video, my one suggestion is around this part of the process.. the GEM steps aren't clear to me.
Is there a uninstall process in case I need to reverse what I did?
@@chansfamily should be in the green engineering menu at the bottom (GEM). If not there is another utility called MIb Toolbox on GitHub that for sure has it.
@@doctordevarious Interesting enough that, I am using v3.6.0 QR Edition and the system shows an message stating "Error during software download. The medium contains no valid update data". I followed all the steps - format SD card in FAT format, extract all file from MIB files to the root folder of the SD card, extract all files from the patch z7 file to patch folder. Any help will be appreciated.
@@doctordevariousI follow all the step except the rename of the file. I try to use the menu to do the update from SD1 where the memory card us. However, the system shows a message "the medium does not contain no valid update data"
@@chansfamily most likely you didn't extract the update contents correctly in the first few steps or your SD card isn't formatted to the correct size or file system.
@@doctordevarious I will give it a try tomorrow again. I am pretty sure the format and extract are good. I will also renew the file and see if the update start by itself.
does this work for EU ?
I do not have a way to verify this. You're free to attempt at your own risk. I feel like there was a comment in here about a non US install but I can't find it at the moment.
Can you a video for Audi A4 2017 also, please?
@@DJMaxxxBG don't have one of those ..
@@doctordevarious :( it would be useful for many btw
@@DJMaxxxBG I understand, but I can't write a technical article for a vehicle I don't own
Hello I’m also located in Ohio. Anyway I could get you to make me a sd card with the proper files on it. And I’d even pay you for it and to mail it to me. Trying to put CarPlay on my wife’s 2018 macan s
Hey just buying a 2017 macan s with 60k km, it diesnt state that it has carplay or android auto, does it come as standard? I didnt checked with my cable since i didnt had time.
Thanks for the video!!
@@domen3277 it is not standard. Hence this video
Thank you ! Will try this as soon as i buy it! How was yours? Reliable? Im going from a T Roc so yeah 🤪
MIH2_JP
Mine's Japan car
GITHUB only provide ER, US, CN, KR, but not JP
Do you know there has been JP release?
Love the Video! But also demotivated haha..