I don't understand that? Where is the spring of the bullet of the web shooter getting stuck, for which that bullet goes forward ? Please tell i will make it in home.
@@XperimentatHome thanks bro I understood everything after watching this video. this video will be very useful for me. Thank you very much for this video.
You could but the watch would become extremely bulky due to the fact that the full mechanism would be located outside the watch or you would have to remove the inside of the watch and fit the mechanism in it
@@mdfarhan4763 well i can’t exactly make a tutorial but i can tell you that the watch sadly wouldn’t work anymore since the mechanism needs quite a lot of space to work depending on the size of the barrel and projectile meaning that you’ll probably have to make a small case to hold everything on the outside of the watch if you still count on it working
woah that's nuts! 🤯I didn't know there would be sculpting and every single detail is on point! Did you create this concept of how it should be put together and how the web mechanism works?
the entire spiderman suit can have pore aka tiny holes sporadically placed amongst it so that super glue can be oozed out of it allowing you to stick to any surface for a long amount of time without falling and oil can be released in certain places to gently release the suit drying it at the same time the holes in the suit could have a heating and air blowing system. All of this should also include a large number of items that will increase the durability of the armour and the suit. The gloves contain an array of different coloured wires for attaching various things. The red wire is the grappling line which you can use to attach yourself to walls or buildings and make sure that you stay safely attached to whatever you're working with. there's a strong pulley system inside with a tiny catapult built inside of the wrist so that when it's fired it can be pulled back in with no problem. I've included some other components within the suit too, mainly the legs, the webbing system and a gauntlets which enable me to grip things and move around quickly and efficiently. a gyroscope can be built into the arm allowing you to know the polarity of the swing so that you can kick your legs back and forth and with doing so the system inside of the suit will also make you kick a little bit harder utilizing air pressure pushing you back and forth with air pushing your back forward and your stomach backwards allowing you to kick much harder before it swing meaning less energy between swings. Finally, a cloth attachment from the elbows to the hip will allow you to Glide instead of falling. A hole in the spine of the suit can produce a Deployable parachute in case you were to ever fall. Deployable parachutes in the spinal region. the suit can collect energy in multiple ways such as solar energy kinetic energy and many more different types of Energies that will allow the suit to stay charged. metallic gloves that have 1000s of tiny pores aka tiny holes in them that oozes out super glue to make them stick and then ooze out oil to make them release, with a heating system that dries the oil. you could find some alloy that was both flexible and strong enough so that they wouldn’t break if you pulled too hard. these could be used as spider man gloves, you could also mix copper wire with pores within it, krazy glue and tiny strands of rope, a heating system and a oil release as well as water releaser to cleanse before each catapult of web strings. The gloves should be attached to the entire suit so the weight will be evenly dispersed, not causing too much tension on any region. Krazy glue can hold 1000 pounds and fishing line can hold 20 pounds per string
Creating a suit like the one you've described would involve advanced materials and technologies that currently do not exist in the real world. However, I can provide a conceptual breakdown of some fictional materials and components that could be part of your Spider-Man suit: 1. **Advanced Synthetic Fabric:** Start with a highly flexible, yet incredibly durable synthetic fabric as the base material for the suit. This material would need to be lightweight, breathable, and able to withstand extreme conditions. 2. **Super Glue Micro-Pores:** To create the sticking ability, you'd need a fictional super glue substance that can be secreted through tiny pores in the suit's surface. These pores would need to open and close on command. 3. **Oil Release Mechanism:** Similar to the super glue, you'd need a system that can release an oil-like substance through specific pores to allow for controlled release from surfaces. 4. **Heating System:** Incorporate a heating system within the suit to quickly dry the oil and maintain flexibility in various environmental conditions. 5. **Grappling Line (Red Wire):** Develop a fictional high-strength and lightweight wire that can be fired from the suit's gloves. This wire should have a built-in pulley system for easy retraction. 6. **Webbing System:** Your suit might include a complex web shooter mechanism for creating and firing web strings. This would require a fictional web fluid and shooters in the gloves. 7. **Gauntlets and Gloves:** These would contain various attachments and mechanisms, such as the grappling line, web shooters, and a gyroscope for improved swinging dynamics. 8. **Leg Enhancements:** Enhancements in the legs for improved mobility and strength, possibly using fictional technology for increased jumping and kicking power. 9. **Cloth Attachment for Gliding:** A special cloth attachment from the elbows to the hip for gliding capabilities. 10. **Parachute Deployment:** A mechanism to deploy a parachute from a hole in the suit's spine in case of falls. 11. **Energy Collection Systems:** Incorporate fictional technologies for collecting and storing various types of energy, such as solar, kinetic, and more. 12. **Spider-Man Gloves:** If not integrated into the suit, develop fictional metallic gloves with micro-pores for super glue and oil release, along with heating and cleaning systems. 13. **Weight Distribution:** Ensure that the suit is designed for even weight distribution to prevent undue strain on any particular area.
I think where people get the suit wrong is it's not a tiny string that comes out of the arm but it's a tiny rope that can support his weight he never produces one string he produces multiple strings that come together and create one strong enough tiny rope that can carry him
**Enhancements to the Spider-Man Suit:** 1. **Crazy Glue Pores:** Incorporate tiny pores on the robot's hands to serve as a controlled release mechanism for a specialized "crazy glue." This adhesive would be used for surface attachment. 2. **Concoction for Bond Release:** Integrate a storage system for a scientifically developed concoction designed to rapidly dissolve the glue. Upon activation, this concoction would allow the robot to detach quickly from surfaces. 3. **Hair-Based Adhesion:** Implement tiny hairs on the robot's fingertips to extend and push the glue from the pores, creating a strong bond when in contact with surfaces. 4. **Concoction Release:** Ensure that the tiny hairs retract after surface attachment, simultaneously releasing the bond-dissolving concoction. This process facilitates effortless detachment. 5. **Heating System:** Install a controlled heating system within the fingertips. This system can be activated when rapid detachment is required, expediting the release process. 6. **Cooling System:** Incorporate a cooling mechanism into the gloves to prevent overheating during rapid detachment, ensuring optimal temperature maintenance. **Enhancements to the Spider-Man Gauntlet:** 1. **Flexible Metal Construction:** Construct the entire suit using flexible metal scales, similar to those on fish or snakes, to maintain both flexibility and strength. 2. **Sign Language Activation:** Program a sign language interface for web-shooting preferably the Spider-Man web firing signal he does in a movie, Specific finger positions trigger web release. Upon gripping the web, the cohesive claw remains attached until the user's hand fully opens, initiating glue dissolution based on feedback. 3. **Refilling Mechanism:** Include a gauntlet wrist section with a refilling mechanism. This system replenishes both super glue and unbinder components upon claw retraction. 4. **Ample Binding Fluid:** Ensure the gauntlet can store six times the amount of binding fluid for extended use. **Enhancements to the Spider-Man Gauntlet:** 1. **Three-Point Claw:** Design a gauntlet with a three-point claw mechanism for secure surface attachment. The claw is fired using compressed CO2 air and is spring-loaded for trajectory. 2. **Automatic Spring Open Claw:** Develop a claw that automatically opens upon firing, resembling a web-like structure. This design enhances grip on surfaces. 3. **Crazy Glue Release:** Implement pores on the claw to dispense the specialized "crazy glue" upon impact, securing the attachment effectively. 4. **Unbinder Release:** Incorporate a mechanism for releasing the bond created by the glue, ensuring effortless detachment when needed. 5. **Braided String Combination:** Equip the gauntlet to launch a braided string combination consisting of three strong fishing lines. Each set of three lines is attached to one of the claw's points, resulting in a total of 18 durable fishing line strings for two gauntlets. 6. **Retraction Mechanism:** Integrate a powerful pulley system into the gauntlet for quick claw retraction. This system includes gears and pulleys and a strong motor inside the gauntlet the clock should be extremely skinny when closing through attract for rapid retrieval. each claw should be two inches long with a webbed design connecting the claws upon open, and strong material least on the claws perfectly so when it opens it has a better chance at connecting. 7. **Refill Components:** Include a compartment within the gauntlet for refilling the cohesive glue and unbinder components, ensuring readiness for future use. 8. **Web-like Design:** Opt for a web-like design for the claw to add aesthetics and functionality, allowing for multiple points of attachment and increasing stability. These enhancements, combined with the flexible metal construction, create a versatile Spider-Man suit and gauntlet that enable controlled web-shooting, secure surface attachment, and effortless detachment. Builders can follow these instructions for successful construction.
@@welcometochilis2740 bro I am also a RUclipsr u can check my channel #hackstark I have made many projects like this it's easy just keep trying u will able to make it
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
I don't understand that? Where is the spring of the bullet of the web shooter getting stuck, for which that bullet goes forward ?
Please tell i will make it in home.
Watch this
ruclips.net/video/eUBcPgCh0Q4/видео.html
@@XperimentatHome thanks bro
I understood everything after watching this video.
this video will be very useful for me.
Thank you very much for this video.
I will subscribed you're channel
Wholesome af interaction
How many packets of mseal is needed plzz reply
Bro tell me can you convert a old watch into webshooter......
You could but the watch would become extremely bulky due to the fact that the full mechanism would be located outside the watch or you would have to remove the inside of the watch and fit the mechanism in it
Yess But a video help me a alot to make And clear my all confusion how to exactly set
All parts in the watch 🙂
@@mdfarhan4763 well i can’t exactly make a tutorial but i can tell you that the watch sadly wouldn’t work anymore since the mechanism needs quite a lot of space to work depending on the size of the barrel and projectile meaning that you’ll probably have to make a small case to hold everything on the outside of the watch if you still count on it working
@@zacsophone9122 Yeah that's true But You know iam something of scientists my self
@@mdfarhan4763 you are
woah that's nuts! 🤯I didn't know there would be sculpting and every single detail is on point! Did you create this concept of how it should be put together and how the web mechanism works?
welcome back bro❤️
Thank you bro
the entire spiderman suit can have pore aka tiny holes sporadically placed amongst it so that super glue can be oozed out of it allowing you to stick to any surface for a long amount of time without falling and oil can be released in certain places to gently release the suit drying it at the same time the holes in the suit could have a heating and air blowing system. All of this should also include a large number of items that will increase the durability of the armour and the suit. The gloves contain an array of different coloured wires for attaching various things. The red wire is the grappling line which you can use to attach yourself to walls or buildings and make sure that you stay safely attached to whatever you're working with. there's a strong pulley system inside with a tiny catapult built inside of the wrist so that when it's fired it can be pulled back in with no problem. I've included some other components within the suit too, mainly the legs, the webbing system and a gauntlets which enable me to grip things and move around quickly and efficiently. a gyroscope can be built into the arm allowing you to know the polarity of the swing so that you can kick your legs back and forth and with doing so the system inside of the suit will also make you kick a little bit harder utilizing air pressure pushing you back and forth with air pushing your back forward and your stomach backwards allowing you to kick much harder before it swing meaning less energy between swings. Finally, a cloth attachment from the elbows to the hip will allow you to Glide instead of falling. A hole in the spine of the suit can produce a Deployable parachute in case you were to ever fall. Deployable parachutes in the spinal region. the suit can collect energy in multiple ways such as solar energy kinetic energy and many more different types of Energies that will allow the suit to stay charged. metallic gloves that have 1000s of tiny pores aka tiny holes in them that oozes out super glue to make them stick and then ooze out oil to make them release, with a heating system that dries the oil. you could find some alloy that was both flexible and strong enough so that they wouldn’t break if you pulled too hard. these could be used as spider man gloves, you could also mix copper wire with pores within it, krazy glue and tiny strands of rope, a heating system and a oil release as well as water releaser to cleanse before each catapult of web strings. The gloves should be attached to the entire suit so the weight will be evenly dispersed, not causing too much tension on any region.
Krazy glue can hold 1000 pounds and fishing line can hold 20 pounds per string
Genius
Creating a suit like the one you've described would involve advanced materials and technologies that currently do not exist in the real world. However, I can provide a conceptual breakdown of some fictional materials and components that could be part of your Spider-Man suit:
1. **Advanced Synthetic Fabric:** Start with a highly flexible, yet incredibly durable synthetic fabric as the base material for the suit. This material would need to be lightweight, breathable, and able to withstand extreme conditions.
2. **Super Glue Micro-Pores:** To create the sticking ability, you'd need a fictional super glue substance that can be secreted through tiny pores in the suit's surface. These pores would need to open and close on command.
3. **Oil Release Mechanism:** Similar to the super glue, you'd need a system that can release an oil-like substance through specific pores to allow for controlled release from surfaces.
4. **Heating System:** Incorporate a heating system within the suit to quickly dry the oil and maintain flexibility in various environmental conditions.
5. **Grappling Line (Red Wire):** Develop a fictional high-strength and lightweight wire that can be fired from the suit's gloves. This wire should have a built-in pulley system for easy retraction.
6. **Webbing System:** Your suit might include a complex web shooter mechanism for creating and firing web strings. This would require a fictional web fluid and shooters in the gloves.
7. **Gauntlets and Gloves:** These would contain various attachments and mechanisms, such as the grappling line, web shooters, and a gyroscope for improved swinging dynamics.
8. **Leg Enhancements:** Enhancements in the legs for improved mobility and strength, possibly using fictional technology for increased jumping and kicking power.
9. **Cloth Attachment for Gliding:** A special cloth attachment from the elbows to the hip for gliding capabilities.
10. **Parachute Deployment:** A mechanism to deploy a parachute from a hole in the suit's spine in case of falls.
11. **Energy Collection Systems:** Incorporate fictional technologies for collecting and storing various types of energy, such as solar, kinetic, and more.
12. **Spider-Man Gloves:** If not integrated into the suit, develop fictional metallic gloves with micro-pores for super glue and oil release, along with heating and cleaning systems.
13. **Weight Distribution:** Ensure that the suit is designed for even weight distribution to prevent undue strain on any particular area.
I think where people get the suit wrong is it's not a tiny string that comes out of the arm but it's a tiny rope that can support his weight he never produces one string he produces multiple strings that come together and create one strong enough tiny rope that can carry him
😀😃🦸♂️
I get what you mean
Dude even scientists couldn't have made a web like spider man he is just a youtuber, what are you expecting in 21st century
Msttt banaa haiiii brooo🤓✨️✨️✨️🔥🔥🔥🔥🔥
you did an amazing job! you should make other web shooters with this tecnique. this is the best web shooter you have done.
new sub
Hey next time can you make The amazing Spider-Man 2 web shooter with no springs and magnets please
Wow amazing buddy keep it up
Thanks ✌️
Wow you did such an amazing job the web shooter looks so real
Btw could you list all the materials needed to make this?
Thank you ...share video with your friends.. check description box for material list
Thank you I will tell you later 4:30PM
naic✔✅☑
This is truly amazing and awesome craftsman skills!
So cool I will try
Bro super bro...I tried it worked very well
Awesome 👌🆒️
Esse eu vou fazer,tem q ser um com muita potencia pra ir longe
**Enhancements to the Spider-Man Suit:**
1. **Crazy Glue Pores:** Incorporate tiny pores on the robot's hands to serve as a controlled release mechanism for a specialized "crazy glue." This adhesive would be used for surface attachment.
2. **Concoction for Bond Release:** Integrate a storage system for a scientifically developed concoction designed to rapidly dissolve the glue. Upon activation, this concoction would allow the robot to detach quickly from surfaces.
3. **Hair-Based Adhesion:** Implement tiny hairs on the robot's fingertips to extend and push the glue from the pores, creating a strong bond when in contact with surfaces.
4. **Concoction Release:** Ensure that the tiny hairs retract after surface attachment, simultaneously releasing the bond-dissolving concoction. This process facilitates effortless detachment.
5. **Heating System:** Install a controlled heating system within the fingertips. This system can be activated when rapid detachment is required, expediting the release process.
6. **Cooling System:** Incorporate a cooling mechanism into the gloves to prevent overheating during rapid detachment, ensuring optimal temperature maintenance.
**Enhancements to the Spider-Man Gauntlet:**
1. **Flexible Metal Construction:** Construct the entire suit using flexible metal scales, similar to those on fish or snakes, to maintain both flexibility and strength.
2. **Sign Language Activation:** Program a sign language interface for web-shooting preferably the Spider-Man web firing signal he does in a movie, Specific finger positions trigger web release. Upon gripping the web, the cohesive claw remains attached until the user's hand fully opens, initiating glue dissolution based on feedback.
3. **Refilling Mechanism:** Include a gauntlet wrist section with a refilling mechanism. This system replenishes both super glue and unbinder components upon claw retraction.
4. **Ample Binding Fluid:** Ensure the gauntlet can store six times the amount of binding fluid for extended use.
**Enhancements to the Spider-Man Gauntlet:**
1. **Three-Point Claw:** Design a gauntlet with a three-point claw mechanism for secure surface attachment. The claw is fired using compressed CO2 air and is spring-loaded for trajectory.
2. **Automatic Spring Open Claw:** Develop a claw that automatically opens upon firing, resembling a web-like structure. This design enhances grip on surfaces.
3. **Crazy Glue Release:** Implement pores on the claw to dispense the specialized "crazy glue" upon impact, securing the attachment effectively.
4. **Unbinder Release:** Incorporate a mechanism for releasing the bond created by the glue, ensuring effortless detachment when needed.
5. **Braided String Combination:** Equip the gauntlet to launch a braided string combination consisting of three strong fishing lines. Each set of three lines is attached to one of the claw's points, resulting in a total of 18 durable fishing line strings for two gauntlets.
6. **Retraction Mechanism:** Integrate a powerful pulley system into the gauntlet for quick claw retraction. This system includes gears and pulleys and a strong motor inside the gauntlet the clock should be extremely skinny when closing through attract for rapid retrieval. each claw should be two inches long with a webbed design connecting the claws upon open, and strong material least on the claws perfectly so when it opens it has a better chance at connecting.
7. **Refill Components:** Include a compartment within the gauntlet for refilling the cohesive glue and unbinder components, ensuring readiness for future use.
8. **Web-like Design:** Opt for a web-like design for the claw to add aesthetics and functionality, allowing for multiple points of attachment and increasing stability.
These enhancements, combined with the flexible metal construction, create a versatile Spider-Man suit and gauntlet that enable controlled web-shooting, secure surface attachment, and effortless detachment. Builders can follow these instructions for successful construction.
Wow so cool i like bro 💯💯💯💯💯
Woah that's nuts 😳
"Everybody gets one." -Spiderman/Family Guy
MIND BLOWING SIR ❤️❤️
Fantastic !
Your web Shooter is cool
This one's clean bro. Very clean!
Waaawww que ingenioso
Y como se llama el recistol líquido que usas
Porfa gracias
14th comment and also cool webshooter
🔥🔥💯💯
Can you tell what material is used
M seal
Can you make it by using a box
That's so cool 👍
That's awesome
Awesome 👍❤
How many pakets of mseal is needed plzz reply i am gonna make it 🥺🙏
😀 So 😀 good 😀
Bro this is really super cool I loved it I am going to make this it's amazing 😍🔥🔥🔥🔥🔥🔥🔥🔥🔥
There's no way you're going to be able to make it it is so hard I'm trying to make one right now
@@welcometochilis2740 bro I am also a RUclipsr u can check my channel #hackstark I have made many projects like this it's easy just keep trying u will able to make it
@@welcometochilis2740 well its hard but the result will pay off
So, easy
Thank you ❤❤❤😊😊
Bro thanks it work im your new subscriber
It's so cool 😎😎
Amazing sir
Nice web shooter . please tell how add shock in this shooter
Bhai next video me ben 10 omnitrix banane ka tarika bhejna
Instead of becoming a hero with these, I shall become a menace
Fantastic web shooter ❤❤❤👍👍👍👍
Wow 🤯 very amazing bro 🤩👌
DUDE im buying that epoxy clay rn and am gonna make it soo coooool well done!
wow very good!
Now there's a nice accessory to your cosplay.
I bet you also make Batman movie cowls out of plaster molds and latex.
Ok I will try
hello a question what is the name of the material you used
M seal (epoxy clay)
Gracias
Good jobe
brilliant work
Thank you bro
Be my bro!😎
Where can I buy one?
Best web shooter I've ever seen
Wow so amazing want me
very hard bro
Can u show me what you used to make it
I think I can do it I got that hard clay
I don't have glue
❤❤❤
bisa terlontarnya bagaimana...itu tdk ada pegasnya atau per nya
Use pen Spring
hi i have an idea , can u make a web shooter with this mechanism but into a normal watch?
I will try
Ak dam riyal banaye he
Up up and away web! 🕸
what kind of material?
Op bor❤❤❤❤❤
what is the name of clay
Bro what is the use of magnet??
Where can i buy someone like it❤️🔥
Hey, can you make a retractable web shooter like Herotech or Jlaser?
👍🔥
😍😍🔥
COOL
😊😊
Very good work.
Will there be a possibility of this for sale?
Bhai ye web shutter kitne me do ge
He the spider man!
😎😎😎😎😎😎👏🏻👏🏻👏🏻👏🏻👏🏻
Trop cool 🤩🤩😀😀
Bro I want to buy your web shooters can u sell these stuff???
In which country?
Wow 👌👌👌 to
Bhai ye to asli hai😂😂😂😂 thoda easy dikhao aur thoda budget me please ❤❤
I mad this allready but Thanks BRO
Bhai ye real web shotter hai kya
Plz make a spider man mask
Why when I make one of these the bullet bursts out but the spring gets trapped in the web cartridge? So I can’t shoot it. Please answer
Watch 👇
ruclips.net/video/eUBcPgCh0Q4/видео.html
ruclips.net/video/eUBcPgCh0Q4/видео.html
What is clay name please
M seal
Amazing
If you can't find m-seal phataphat what should we do
Bro this is awesome I ended up in hospital very quick I tried jumping of my roof
Cool
Awesom
Nice
Can you make one for me sir i need this
nice😮😮🤯😲😲
Kren👍
Cooooooooooooooool
Вау какой он реалистичный
Sar kahan the itne din se ab daily video dalo please
Is it claydo
I have no strap what should i do tell me