AT-LP120XBT-USB Setup | Direct-Drive Turntable (Analog, Wireless & USB)
HTML-код
- Опубликовано: 4 сен 2024
- This tutorial will guide you through the setup process for the Audio-Technica AT-LP120XBT-USB Direct-Drive Turntable (Analog, Wireless & USB).
The AT-LP120XBT-USB turntable is modeled after the AT-LP120XUSB, but with the added convenience of Bluetooth® wireless connectivity along with the existing analog and USB outputs, allowing users to connect to wireless speakers and headphones, as well as computers, home stereos, and more. This turntable includes a DC servo direct-drive motor, as well as an adjustable dynamic anti-skate control and switchable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"-mount headshell with an AT-VM95E Dual Magnet™ phono cartridge.
Learn more about the AT-LP120XBT-USB Turntable: bit.ly/346F7Mk
Having purchased the AT LP120XBTUSB I can find no faults with this turntable it works like a dream having been using vinyl for close on to 55years now I can honestly recommend it
the lp 60 is automatic and you can just press start and the vinyl starts automatically and the arm will return by itself when its finished. lp 120 dont have this feature. this is a killer for me. i dont like the lp 120 because of this. i prefer not having to be worried about placing my stylus at the good spot and having to make sure i go remove it fast when the vinyl has ended to not damage anything. also , the lp 60 has a belt and it is known that the belt is better than a direct drive because the direct drive can sometimes bring noise which the belt dont do. a belt is also easier to replace that a motor i guess. the lp 120 stylus does cost more than the lp 60 stylus and the turntable also.
Well I would say the 120 is more expensive for a reason. The tone arm is adjustable to every difference heads you can place, which is something more professional I would say, and I can tell you, definitely the direct drive would cause less noise than the motor and the band, it has more parts in the assembly, the LP 60 has a motor too, so both has motor but one has also band, pulleys etc, more complex and possibility to cause noise. If it plays automatically the when you want to move the tone arm manually, you may damage the mechanism. The LP 120 has a mechanism that allows you to place the stylus on the record smoothly, and take it out same way. If you don’t realize when the record finishes, at least my records have athe end like a groove loop to avoid the stylus go any further. I would say LP60 is good for people that would just like to take it easy and listen the music from vinyl. The LP120, is more for people that are more into the “play vinyl art” if you will. For those that would like to be more “professional” in the subject.
@@armandotrujillo4166 hey i respect your opinion but i dont think its about being professional to choose having a 120 model over the 60. if you want to use a turntable professionally , i dont think u will get any of those really. on the lp 60 you do not need to change the cartridge model and its fine using the one provided with the lp 60. you only have to change the stylus when it gets old thats all. personally i got a turntable to listen to music and the fun of having vinyls and i prefer not having the trouble of use it manually. its very cool just push a button and the turntable starts and then stops automatically. i have the 60 model and honestly i dont hear any sound other than the music. no motor sound or anything. i use a 200 dollars soundbar and im pretty sure having a 120 would not change anything in the sound. thats a personal choice which model you want. i prefer save money and have an automatic turntable and i think the 60 model is awesome. its already something to change the vinyl sides and even push the button each half hour or so to start the music again. also having to mantain vinyls like clean them and store them. some prefer play mp3 or cd which are even less trouble. if you really want to be professional and start work as a dj or something , then u better look for a 2000-3000$ turntable. :)
Yeah I mean, obviously a professional would not use any of these models, that’s why I used (“”) for the word “professional”. I would say the 60 is way more easy to set up and play your records. I agree with you that you don’t hear other noise than the music, my point is mechanically, out of the 2 systems, the one with the band would make more noise first, that doesn’t mean that necessarily the LP60 is making noise. I think there are models for all tastes. Me, I am more hands on guy, and I just find amazing to set up my turntable, I really enjoy it, besides listen to the music. The LP 120 also is heavier which would bring more stability. But hey, both systems are ok. I am 42 years old and I am getting new records, and re discovering the old records of my late father, so I’m dealing with new and more than 50 year old records. I found this equipment amazing and I feel comfortable to handle it. Also I got my 14 year old son interested and he’s crazy about it, playing the records of his late granddad, which he didn’t met (my dad died 35 years ago). Enjoy your turntable as we are!!!
@@armandotrujillo4166 yes question of choice but for the noise i read somewhere that actually the mechanical do more noise because of the motor. decoupling motor from platter eliminates a source of potential noise. i also use old records and i guess this will damage the stylus faster. i would not want to use some stylus that cost tons money. thats another reason why i like the lp60 because the stylus is not a huge price.
Thanks for the outstanding setup video. I was really struggling with the setup and distortion. I thought that I was not getting the counterbalance correct, or had somehow damaged the stylus. After the video helped me confirm that the counterbalance setup was correct, I found the ultimate problem. The "Line" vs "Phone" setting. Once I set it to "Phono" the distortion immediately ceased. This is a great turntable. Thank you Audio-Technica.
I had the exact same experience with "line" and "photo" today: October 7, 2023. I downloaded the user guide and it described the switch.
Got mine yesterday. Setup worked like a charm. This device looks so beautiful. I started with a Coheed and Cambria Album. What a fantastic listening experience. Now I am really hungry for more. 🙂
this man has a wonderful voice to listen to (thankfully, since I have to watch the first half like 3 times lol)
Great and comprehensive video that sticks to the point. My only two gripes are that it doesn't show how to mount the dust cover (turned out to be fairly easy, but I was a little afraid of breaking the hinges) and it doesn't explain the weird little black disc next to the Counterweight on 0:46 (which is, seemingly, never used...?).
The little black disc is basically an adapter that you place over the metal center piece in the middle of the platter. This allows you to play 45 RPM records.
I feel *really* old all-of-a-sudden.
⌛😹
Thanks for all the missing parts I was lucky that I even had a turntable in the box. 😂
Hi! Sorry to hear that you are not finding the related parts to your turntable. Many of the smaller pieces are incorporated into the styrofoam packaging, to ensure that they do not get damaged or expel within the box, while shipping. Let us know if you are still not able to find the secured pieces. Thank you! -A-T USA
Thanks for the excellent setup video, I received this turntable today and absolutely wonderful
Going from a briefcase crosley to this is making my brain hurt
Thank you for this! I was able to set it up perfectly.
Very informative and " to the point" Video , Thank you
It's a good turntable for playing records. Except you can't set the tone are on 2 grams... that's way to light... i have to set mine on 3 grams. And the anti skate don't work like it should. I have to set mine between 1 and 2 grams. To be correct..... i wish the turntables were made in Japan.........
I’ve become a die hard Audio technica fan
I got this turntable and absolutely love it
I had a lp 60 prior
I even have a audio technica Bluetooth headphones
Quality !
nice turntable, it's a shame because my comes with needle bent to the left and just broke off immediately. Gladly I had some cheap head replacements that's compatible with the arm but I can't believe this pass the final inspection test before it's been send to the shops.
Hi there! Please contact our Repair Team at repair@atus.com. Thanks! - A-T USA
Best turntable..& high efficiency, good looking ❤👍
i have the 'black' model and i'd like to know in future upgrades to make it semi automatic so that the end of the vinyl stops and lifts [same as the Dual 505]. it would sell more. Why don't they include a 78 cartridge .from Greece
The suggested grams for the counterweight and the anti-skate tracking value are so off. I’ve been trying to set this turntable up for quite a while now thinking it was some hardware issue, but after drastically changing the recommended settings, it finally worked a little bit. Since I had to eyeball it, the setup still isn’t where I was expecting or wanting it to be when I purchased it. I’m going to continue to try to fine tune it, but I just wish the recommended settings were at least a little closer. 🤦🏻♂️
i personally prefer the automatic turntable like lp 60. plug and play. press start and you dont need to worry about anything.
Awesome!
Why should the dust cover be removed when records are playing?
How accurate is the cartridge alignment out of the box? I am blind, so aligning the cartridge myself is out of the question. I can get some assistance with setting the tracking force and antiskate, but I know that cartridge alignment is a much more involved and time-consuming process.
Hi Robert! No additional alignment is required when setting up the turntable. The cartridge and headshell are aligned and ready for use out of the box. Thanks! - A-T USA
@@AudioTechnicaUSA I feel more confident to go ahead and play vinyls.
@@carlosquintanilla3700 You still need to level the tone arm and set weight and anti-skating.
how will you read the reply ?
Braile?
You mentioned the Bluetooth and usb completely disabled when switched to PHONO. Does that mean this particular 120 model doesn’t require the mod to remove the built in pre amp associated with high frequency filters?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Can I pair 2 wireless speakers?
Hi there! As far as the turntable goes, it is only a bluetooth transmitting device, so it is only going to pair to one bluetooth receiving device at a time(bluetooth speaker, bluetooth headphone, or bluetooth receiver adapter). There are bluetooth speakers out there that are sold as a pair (like the Samson MediaOne BT3 or Kanto YU4 for example) so you can pair one device(like the turntable) and have it play in stereo out of both speakers. Thanks! - A-T USA
I have two lp120xusb, a M2 mixer, and Kanto yu6 speakers.. my sounds isn't coming through and I even bought a RCA cable separately... Any tips to playing both?
An excellent mid-range TT. Curious as to why at the end it’s recommended to fully remove the dust cover when spinning records. 🤔
Hi there! If the cover is down, vibrations can get trapped between the cover and the top of the turntable, which will make the turntable more prone to feeding back. Thanks! - A-T USA
@@AudioTechnicaUSA Thanks for the explanation. With my setup (powered speakers, no amp), I don’t have any problems with feedback if the cover is down or tiled up while playing - but if it starts, I’ll know to check this. Love this TT!! I just bought one from my daughter’s birthday (to upgrade her current setup).
I enjoyed your explanation but have a doubt.
Can we connect the phono cables to a ‘’Marshall’’ (Stanmore mark 1 type) speaker which has input for external devices such as an amp but no option to connect a ground cable???
Many thanks in advance.
@@richmck007 You should be able to. You might get a little feedback. I don’t have mine grounded and get a very small amount. If you get an unacceptable amount - search YT for videos on how to mitigate - there are work arounds. Cheers!
Bluetooth, 30 feet, "Line of sight". How strict is this 'line of sight' requirement?
I wish it had tonearm height adjustment.
Well, you have to pay for it on another model...
I understand there's a few features that the older model had that this one doesn't have like a built in ground connection and a reverse mode
@@jimmiesmith5811 no reverse, it does have a ground connection FTW :)
@@netoe The screw in type
My daughter has the same model than on this video and there is no Bluetooth icon and Bluetooth speaker can’t seem to connect with this turntable.
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Can I sync this with a soundbar?
Need some help please; still like the turntable which i received by mail from best buy, however it came with the wrong AC Adaptor. The one provided is obviously for another country. Can I please swap these out?????
you might be able to find an adapter for whichever country yours came from to the standard US ac plug, or whatever country you are in
Go to a local Best Buy and tell them...let them correct it
In the event that I already have 8 devices connected via Bluetooth how would I go about resetting that?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
@@AudioTechnicaUSA Can I pair the turntable with my computer? It isn't showing up in my list for pairing.
@@Imperatorelite999 The turntable will connect to compatible Bluetooth receiver devices such as headphones and speakers. Devices like smartphones and computer are transceivers and are not designed to connect to Bluetooth transmitter devices such as the turntable. Thanks! - A-T USA
Really difficult to set the balance when there is no mark on the player!!!!
Great turntable. But unfortunately no stop at the end. 😭
Do you have to do the readjustment for the tone arm every time you replace the stylus with the same one, or only when changing the cartridge head and stylus with a different type?
Hi there! When replacing the stylus with the same one, it is not necessary to rebalance the tonearm, as the weight of the combined cartridge, stylus, and head shell has not changed. You would want to rebalance the tonearm when the head shell or cartridge has been replaced, since it is highly unlikely that these would weigh the exact same as the previous components. -A-T USA
Hi! I think I set it up the turntable correctly but when I turn it on all the lights are flashing at the same time (red flashing), if I press start, the plate wouldn't spin and if I keep the start button pressed it would spin for about a second and then stop. I am looking everywhere, on the audio-technica website, on the manual, on youtube but I can't find anything related do this issue. Can you please help? Thanks!
Hi Nicola! Please contact our Service Department regarding the issue you are experiencing. The Service Department can be reached by phone at (330) 686-2600 extension 5009, or by email at service@atus.com. Thanks! - A-T USA
HI AT > I have the TT for over 3 years of trouble free pleasure. But I now see that when I use the lever to lower the tonearm to the record, it moves very quickly down. I am required to lower the lever very carefully or it lowers the tonearm too quickly. Is there an adjustment to the Lever?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USAv
So it is possible connecting the turntable to my jbl 9.1 soundbar, using the Bluetooth connection?
Hi Samuel! Yes, it should be able to connect. Thanks! - A-T USA
Is the USB audio output class compliant? Sounds like it may be when the video says, "No drivers needed". I'm wondering if I could just connect the USB directly to my iPad/phone and get audio into those devices.
Hi there! No, it will not connect to an iPhone or iPad. It uses a combination of USB Audio Codec that is part of the operating system and software to record/play. Thanks! - A-T USA
I have two at-lp120xusb I have an M2 numark mixer and I have a Yu 6 Bluetooth wireless speakers and I cannot get sound off any of them
Hi Lukas! If you are connecting the turntable(s) to the LINE input on your Mixer, or to the PHONO input on your Mixer but have the AUX LINE / PHONO switch on the Mixer set to LINE, make certain that the phono preamp selector switch on the back of the turntable is set to the LINE position.
When connecting the turntable to the RCA jacks on the kanto YU6 Speaker(s), make certain that the phono preamp selector switch on the back of the turntable is set to the Line position if you have the RCA Phono/Line switch on the back of the speaker set to LINE. Thanks! - A-T USA
Can someone please help. I have just got one of these bluetooth models a couple of days back. When I switch it on the light directly under the bluetooth button flashes red and blue very quickly as soon as I turn it on and stays that way for around a minute before then staying red. In this photo that light is blue. Is my model faulty? Thank you
Hi Rob, this is correct. The light does flash red and blue after powering on the unit. If another Bluetooth device is not paired to the turntable during this time, the Bluetooth function times out after about 1 minute and the light turns solid red. The light is solid blue when the turntable has paired to another Bluetooth device. Your turntable is not faulty. Thanks! - A-T USA
I’m interested in this turntable because I have over forty pounds of 78 records. Will the provided cartridge play them?
The provided stylus is for the playback of 33-1/3 and 45 rpm vinyl records only. To play 78 rpm shellac records you will need a stylus that was specifically designed to do so. The grooves on a 78 rpm shellac record are much wider than the grooves on a 33-1/3 and 45 rpm vinyl record. When you want to play 78 rpm records on the AT-LP120XBT-USB Turntable, you can do so by replacing the provided .03 x .07mil elliptical stylus with our 3.0mil conical stylus, the AT-VMN95SP Stylus. Thanks! - A-T USA
AT-VM95SP Replacement Stylus - 3.0 mil conical stylus for AT-VM95 Series cartridges
www.audio-technica.com/en-us/cartridges/styli-accessories/a-t-moving-magnet-styli/at-vmn95sp
can you play back the music to a pc with speakers using the usb
Hi there! Yes, you can have the turntable play through your PC’s speakers when connected via USB. For instructions on how to do this, please contact our Audio Solutions Team at audio-solutions@atus.com. Thanks! - A-T USA
Does this turntable have a built in pre amp?
Edit: it says in the video it has a built in phono pre amp i shouldve just listened before commenting 💀
I have tried connecting this TT to my Yamaha receiver that has Bluetooth function. (They were very close during the attempt.) The receiver's remote has a Bluetooth connection button to start the search for connections. It would not connect. Any hints? Thanks. (I have easily connected to other speakers, headsets, etc.)
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Hi my turn table don't have a ground in the back
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Hello, can I connect the USB output of the turntable to a DAC USB Imput port to listen to records?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
These turntables are all backordered. So ridiculous to not have inventory before Christmas. When are you getting in stock?
Hi there! Unfortunately, due to increased demand we have experienced disruptions in our supply chain and we cannot guarantee when it will be back in stock. Inventory will begin to level out early next year. In the meantime, you may be able to find stock on other online retailers. We apologize for the inconvenience. A-T USA
Got mine today, ordered it on Amazon 4 days ago. My local Guitar Center actually have them in stock but they are marked up $100. (Sorry GC, you lose to an online retailer again.)
Can the TT be used in 2 modes , separately. Connect to a Receiver (Denon DHA-800H) via the Phone connection to the Receiver which uses the Receiver's Phone Preamp built in AND also connect to BT speakers . I see that you cannot use BT while playing on the Receiver, but if the Receiver is turned off , can I simply switch the rear switch on the TT to Line without the need to disconnect from the Receiver?
Hi Aldo! If the turntable is connected to the Phono input on the receiver the pre-amp selector switch on the turntable must be placed in the Phono position. It does not matter which position the switch is in for Bluetooth use.
If the turntable is connected to any input other than the Phono input on the receiver the pre-amp selector switch must be placed be in the LINE position. Thanks! - A-T USA
Assemble made by Indian price how much price
how i reset it ? :/
Hi! I wonder if I will be able to use the bluetooth function if I hardwire this turntable to my amp? Of course not at the same time.
Hi Tobias! The AT-LP120XBT-USB can be used via Bluetooth while plugged in to the amplifier. However, the turntable’s preamp must be ON (set to LINE) in order to send the Bluetooth audio signal. Thanks! - A-T USA
@@AudioTechnicaUSA it's really confusing, because 8 months ago you wrote "it doesn't matter which position the switch is set to for bluetooth use". :)
@@AudioTechnicaUSA now I have set up my turntable and I really like it! But am I doing something wrong if I'm hearing a humming background noise when listening with my Bluetooth headphones? Just want to know that my unit is working properly.
@@tobiasrybing5631 Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
I could use some help as well. I recently replaced the headshell and cartridge that came with my Audio Technica AT-LP120XBT-USB turntable with an Ortofon Scratch Concorde MKII cartridge but there's a humming that begins very quietly and grows very loud gradually. I've tried adjusting the tone arm thinking that may be causing it but that doesnt help. I believe I may need to ground the tone arm since when I touch it the humming sounds fade away a little. When I put back the original cartridge the player plays like it should without said humming noise. Does any know the exact cause of the humming or how I can mitigate?
Hi July! This sounds like a classic case of acoustic feedback between the cartridge and the speaker(s). Try putting more distance between the turntable and the speakers.
Note that this particular model Ortofon cartridge is a high-output design with an uncommonly high output voltage of 10.0 mV. This is more than twice that of the (AT-VM95E) cartridge that was provided. A doubling of cartridge output voltage yields a 6 dB increase in gain so in your case, there is 9 dB more gain when using the Ortofon Scratch compared to the supplied AT-VM95E (10.0 mV for the Scratch versus 4.0 mV for VM95E).
A magnetic phono cartridge is basically a miniature microphone and the interaction between a cartridge and a speaker is very much like the interaction between a microphone and a speaker. When used in close proximity to one another a feedback loop can develop - particularly at higher gain levels, higher volume levels, and at lower frequencies.
Phono cartridges are transducers, converting mechanical energy (generated by the musical signal modulated in the records groove which cause the stylus to vibrate) into electrical energy. The electrical energy (signal) which it produces is then amplified by the stereo amplifier or receiver, sent out to the speakers (which also vibrate in sympathy with the signal in order to reproduce it) and we hear this signal in the form of music. Similar to the way a microphone functions however, the acoustic sound pressure waves coming off the loudspeaker can also cause the stylus to vibrate. When the “signal” generated by the waves vibrating the stylus is amplified and reproduced by the speaker again, the feedback loop has been developed and the hum generated as a result continues to grow louder and louder with each loop. Thanks! - A-T USA
Can I connect this turntable to my dj mixer?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Could anybody be so kind to explain me, why the dust cover should be removed during vinyl playback? shouldn´t it protect the vinyl playing from dust or any incident nearby?
Hi Carlos! If the turntable is in close proximity to the speakers and if the volume is loud, the dustcover can actually pick up the sound from the speakers and direct it the stylus causing feedback. If neither is the case, you may leave the dust cover in place. Thanks! - A-T USA
@@AudioTechnicaUSA thanks that make total sense.
Why my turntable cannot be connected to my Bluetooth speaker? It used to work in right way..
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Can I connect this to a Chromebook? It doesn't seem to work.
Hi Ed! When connecting the AT-LP120XBT-USB to a Chromebook, you will want to make sure you are connecting the turntable directly to the laptop and are NOT using a USB hub. The turntable should show up similarly to a USB microphone. You can learn more here: www.audio-technica.com/en-us/support/audio-solutions-question-of-the-week-can-i-use-a-usb-microphone-on-a-chromebook/ Thanks! - A-T USA
I can't get my headphone to pair.
What are the % of 8 & 16 under the tone arm for.
i'm having a really strange problem that i can't find an answer to. when connected over bluetooth with factory tonearm settings, i put on one of my mom's old records from the '60s that's been stored in a hot garage for decades... it sounds marvelous. then i tested three different records of mine that were pressed in recent years, stored indoors and never before played, and the bluetooth sound quality is complete ass for all of them - lots of heavy artifacts, distortions, popping, clicking, everything. unlistenable. all of these are standard 33rpm 12" records. is there some kind of setting that optimizes playback for older records rather than for ones pressed in the '00s and '10s? i can't get to the bottom of this and feel like i'm taking crazy pills.
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
The Bluetooth connection on my turntable randomly stopped pairing to my sound bar. Only had it for about a month.
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Were you able to find a solution. My soundbar has also stopped pairing.
@@marqusruiz3936 Yes actually. Look in the manual on how to reset your bluetooth settings. There'a a process to it.
@@HaloAdmiral In the turntable manual? I have the same problem and I couldn't solve it. Would you help me, please!
Where can I download the manual for this turntable please?
Hi there! You can download the manual at the bottom of this page: bit.ly/346F7Mk. Thanks! - A-T USA
@@AudioTechnicaUSA Many thanks!
This is awsome
I'm planning to get this turn table but I want to know if the built in pre-amp is enough to connect it to a Sonos One speaker or would getting a separate phono pre amp like a Fosi Audio work better.
Hi David! The Sonos One can only connect to devices via Wifi, not Bluetooth. Since the Sonos One doesn’t appear to have any analog audio inputs, the AT-LP120XBT-USB will not be compatible with that speaker. Thanks! - A-T USA
@@AudioTechnicaUSA Thanks for the reply. I am definitely going to get the AT-LP120XVT-USB as my turntable for my vinyl sound system but I'm not sure what would be best. The turntable does have a pre-amp but is that enough to connect it to speakers so I can enjoy listening to vinyl records? I've also decided I want to add a Sony 5 channel receiver to my set up but to be honest I'm still a little confused on what I need to use for an amp/pre-amp so I can get the best quality sound for my investment.
@@davidpatton7205 Many customers connect our turntables to powered speakers. These are speakers that require power from an electrical outlet or battery to work. The reason these speakers need power, is to utilize the built in amplifier of the speaker. This means you could plug the turntable directly into these speakers and be good to go. Another route you could take, would be connecting the turntable to a receiver / amplifier, and then connect passive speakers (or speakers that don’t plug into the wall outlet or use battery power) to the receiver. Thanks! - A-T USA
@@AudioTechnicaUSA I have 2 passive speakers connected to an amplifier with bluetooth 5.0. Can I connect the turntable via bluetooth to my amplifier and listen to my vinyls through the speakers that are connected to my amplifier? connecting it in this way will the music be heard with low quality?
@@hugosalinas1980 Yes, the AT-LP120XBT-USB should be able to connect to your amplifier via Bluetooth. Thanks! - A-T USA
Mine pairs successfully with multiple speakers, but does not play audio through them. Why?
Hi there! Please be sure that the switch on the back of the turntable is switched to LINE. Thanks! - A-T USA
la meilleure platine fiable bon son le top j en suis tres content merci audio technica
If you have a receiver, turn it off to use BT. That solved it fo me.
If my Bluetooth headphones don’t have an audio control, is there a way of lowering the output volume?
Hi Lucas! There are no volume controls on the AT-LP120XBT-USB. Volume can only be controlled on the device that the turntable is connected to. If that device cannot control volume either, then that device will play the turntable at full volume. Thanks! - A-T USA
hi, i purchased this like 3 weeks ago and i'm having trouble with inner groove distortion. where can i get some help?
Hi Ignacio! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
What did the team happen to tell you?
@@ggrebelspy3726 hi, they send me a huge email with a lot of solutions
06:12 that bluetooth light looks GREEN not blue .....
How do I get it to NOT connect to a Bluetooth speaker? It wants to pair with a device every time I turn it on.
Hi there! The Bluetooth on the AT-LP120XBT-USB cannot be disabled. If the turntable does not find a device to pair to after a short period, it will time out and the LED will go solid red. Thanks! - A-T USA
@@AudioTechnicaUSA Is there a way to disconnect a speaker? It always goes to the tv speakers in the living room, when I want it to connect to the speakers in my bedroom. I’ve tried connecting my speakers in my bedroom, but it always goes to the living room speakers.
@@superradness To disconnect the turntable from its current speakers, press and hold the Bluetooth button to put the turntable in pairing mode. This will allow the turntable to pair with new speakers. If your turntable continues to pair with the speakers in your living room, you will have to turn off those speakers in order for the turntable to pair with your bedroom speakers. Thanks! - A-T USA
@@AudioTechnicaUSA Thank you for the help! I’ll try that. You’ve been super helpful!
Is the cartrige pre alinied?
AT say it is.I checked mine and it was perfect out of the box.
When is this going to be available been trying to get it for ages now lol
Hi Paul! Unfortunately, due to increased demand we have experienced disruptions in our supply chain and we cannot guarantee when it will be back in stock. Inventory will begin to level out early this year. In the meantime, you may be able to find stock on other online retailers. We apologize for the inconvenience. A-T USA
Hey Paul! I had been trying yo find it, and I made it today, finally! I ordered mine at Best Buy. So you better hurry mate! $299.
Just got mine at a record store
We just got one thru best buy!
Thanks for all the comments I finally got one and loving it :)
Does it require an amplifier to play music through bluetooth, or do i just simply connect and it plays?
Hi Efrain! No it does not. The speaker just needs to be Bluetooth. Thanks! - A-T USA
Hi. The line output is a bit low. Is this normal?
Hi there! Please contact our Audio Solutions Team for help. You can reach them at audio-solutions@atus.com. Thanks! - A-T USA
Am I able to connect my speakers with an aux into it?
They have a 3.5mm jack
Or would I need to buy an adapter
@@DG-vg2hk Hi Damian! The AT-LP120XBT-USB includes an RCA cable and to connect to a stereo 3.5mm aux input, you may need an adapter such as the following:
www.amazon.com/AmazonBasics-3-5mm-2-Male-Adapter-Stereo/dp/B01D5H8JW0 Thanks! - A-T USA
@@AudioTechnicaUSA I appreciate it but I forgot to mention that it has a 3.5mm input jack so I need to plug it into the player, is there an adapter for that?
@@DG-vg2hk Yes, there are different adapters available if they need female connection receptacles for either the RCA or the 3.5mm. Below is a link for an adapter for female RCA and female 3.5mm
www.amazon.com/Female-Stereo-Splitter-Adapter-Extender/dp/B07C3M2GXH Thanks! - A-T USA
Yep, you need to remove the preamp, USB and Bluetooth stuff to turn it into a very good entry-level turntable.
WRONG! Bad advice.
@@philip6502 Nah, you're wrong - that's why you can't substantiate your claim.
@@QoraxAudio I don't need to "substantiate" anything, I own the turntable and use it. You, on the other hand, seem to be making your claim using old facts. Not to mention, if some wants an entry-level turntable, the wouldn't buy a turntable and remove parts to reach their goal. That's absurd.
@@philip6502 You don't know it, because you didn't try it.
I actually did.
Removed the preamp, because when it's switched off, there's still some capacitor in the signal path that adds to the cartridge loading capacitance.
The preamp PCB itself also adds unnecessary capacitance.
Educate yourself on cartridge loading by starting here: www.hagtech.com/loading.html
As for Bluetooth:
Unless it's AptX HD Bluetooth, it's a lossy transmission that'll degrade the sound quality, which is audible with proper speakers that are placed correctly.
@@QoraxAudio The Bluetooth aspect of the TT is an afterthought for me... it's there if I ever want it. What I wonder, after reading your reply, is why did you choose this TT of all on the market?
My reason in choosing this is I thought it would satisfy my needs; if not, it was returnable. Also, I'm more interested in the music I like than tinkering with the equipment. I've done enough of that. Enjoy whatever you're using now.
Is it available here in Philippines?
Hi there! Please contact service@audio-technica.com.sg for assistance. Thanks! - A-T USA
Will it be availble also in Japan?
Hi there! Please contact support@audio-technica.co.jp for assistance. Thanks! - A-T USA
tres bonne platine bon son elle a tout d une grande
You guys have one of the worst paper instructions ever.
I just got this turntable and thought it was able to receive a Bluetooth input, so I could connect my phone and play music through it. Is that possible, or is Bluetooth only for sound output?
why would you play music from a phone trough a damn turntable
Hi there! The AT-LP120XBT-USB has an internal Bluetooth transmitter which may send the signal to compatible Bluetooth receivers such as in headphones and speakers. The turntable does not have a Bluetooth receiver to accept signals. Thanks! - A-T USA
did they fix anti skate issues?
Must have, mine is good.
Yes but it's not correct on the dial.. You will have to buy a blank record off ebay and set the anti skate up....
Can you not pair your phone to it?
Hi there! The AT-LP120XBT-USB connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable. Thanks! - A-T USA
@@AudioTechnicaUSA So, this will not connect to a Bluetooth receiver?
I'm extremely confused•~•
About the turntable...or just your life in general?
@@philip6502 both
@@danieltheboxer2557 LOL - Then work on the turntable aspect. The rest will fall into place for you.
It’s all fun and games until you have to build these shits.
I just took 4 hours trynna get the stylist balanced.