why the audio test is not the recorded one . .i can make out the difference between recorded one and the original one .😏 plz make a video and show us how it sounds by using the recorded one ! . ..
Bought several of them on shopee. Different pcb layout and ic's. Some don't have ground loop and some have. I use the one without ground loops on my aiyima builds and the ones have goes to the old component speaker amplifier. Though you can remove ground loop by putting dc to dc isolator and you're good to go. They just cost about 29 -48 php depends on the shop
Pls look on your board if there is 12v connector pin also.look for an 5v regulator or Atleast if there are pins for one on the circuit board. If there is no regulator you can solder one on to the board. If there is that means your board most likely has a 12v connector or pin.
That is not the real sound that comes out of the speakers, you put audio in editing... it is impossible for it to sound with the quality that you put in the video
Valla video más malo amigo, desde luego no hacéis uno bien. ¿Por qué le das 5v al pam y al módulo? ¿no te das cuenta que le falta voltaje? ¿Por qué no has probado la radio del módulo para ver si el pam la reproduce? ay! sois malos pero de cojones. te doy un like pa bajo
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
your video's are awesome. thank you. waiting for my boards.
why the audio test is not the recorded one . .i can make out the difference between recorded one and the original one .😏
plz make a video and show us how it sounds by using the recorded one ! . ..
Thank you for this video ❤🎉
You forgot to fix the ground loop problem, on low volume you will definitely hear humming and static noise.
How to fix it?
Bought several of them on shopee. Different pcb layout and ic's.
Some don't have ground loop and some have. I use the one without ground loops on my aiyima builds and the ones have goes to the old component speaker amplifier. Though you can remove ground loop by putting dc to dc isolator and you're good to go. They just cost about 29 -48 php depends on the shop
Its work with 12 v ?? U not use 7805 ic for 5v to convert 12v ..its possible ??
same question??
@max.ravi22 pam8610 will not work with 5v. Need to have a step-up. Your query is right
@@shoebshk but video me to bina ic chal rha he modual shot nhi hua ...kaise kia bhai ye...!!
@@ravi271000 Not possible bro. Unless the Bluetooth board is of 12v
@@ravi271000 There are similar Boards with 12v input available. Possibly wohi use kiya hoga
Does this BT Module last for sometime?
Boa tarde esses auto falantes estão ligados em paralelo ou série
Bhai mere pas charger b h mobile ka led wala jo isme lagaye wo b speaker wala b h.
Wo bich ka ckt .
Boa tarde parabens muito bom
Very good
Gracias por compartir, una pregunta, porque titila o queda temblado los números del mp3?????
Hola Hermano
Crees Que Se Pueda Instalar En Motoneta
Este Bluetooth Y Amplificador
Bang klo pakai baterai 7.4vol kuat gk bang atau bisa gk
kan di modul nya 12vol🙏🏻🙏🏻 soal nya saya udah beli baterai nya,
New model tpa3110 15w+15w make video
Solo con un cargador alimentas al amplificador y al modulo?
How come 5 volt charger run a pam 8610 when the working voltage is 12 volt voltage
How to connect with led tv
I did it, my MP3 board out ..
Actually that board is 5v...but you give 12v...hos is possible?😢
Pls look on your board if there is 12v connector pin also.look for an 5v regulator or Atleast if there are pins for one on the circuit board. If there is no regulator you can solder one on to the board. If there is that means your board most likely has a 12v connector or pin.
Y la radio también funciona la radio Así mismo o no
isme led tv ke saath kaise connect kare
Kuat speaker brp in hu
Modified Antenna Volume Control, Switch On Off, Input Rca female and DC12V
buen proyecto
1A powering mp3 & pam8610 not strong enough for 2x big speaker (ex radio tape)
Very very thank u
Fiquei esperando o teste de áudio, você apenas colocou uma música de fundo.
y el sonido real de la prueba ????
Nyimak yg pake tone kontrol volume bang
no hacia falta que le hagas soldadura si tiene la bornera zócalo en el modulador, el conector zócalo deberías soldar en el amplificadorcito
That is not the real sound that comes out of the speakers, you put audio in editing... it is impossible for it to sound with the quality that you put in the video
😊😊😊😊😅😊
Oaooooooo
faxe
Fake
Valla video más malo amigo, desde luego no hacéis uno bien. ¿Por qué le das 5v al pam y al módulo? ¿no te das cuenta que le falta voltaje? ¿Por qué no has probado la radio del módulo para ver si el pam la reproduce? ay! sois malos pero de cojones. te doy un like pa bajo
Gx noise om
gk terlalu
Bad work.
Channel sabcrbe karo
Fake