drill chuck/how to make a diy mini drill head with bolts and nuts
HTML-код
- Опубликовано: 17 июн 2023
- drill chuck/how to make a diy mini drill head with bolts and nuts
hi friends in this video we make a mini drill head from bolt and nut pcb spacer,this method is very simple and easy,
Friends, the soldering connection is not a strong connection. So, use this method only on small motors with low torque, for example, 360 or 365 motors, and use a small cutting disc. As you can see in the video, I have used a small motor and a small disc.
And DON NOT USE THIS METHOD ON 550 OR 775 MOTORS
how to make mini drill chuck from bolts and nuts
diy mini drill chuck /handmade drill chuck/ how to make mini drill head/ diy mini drill head/ handmade mini drill head with recyclable material/
#drillchuck #makedrillhead
#drill #minidrill #diydrillhead #diydrillchuck #minidrillchuck #handtool #bolt #minitool #turning #savemoney
#aryanmade #arianmade 
Хобби
Thank you for all these great tips. Keep these ideas coming. Great video.
Thanks my friend❤️🙏
Mui bueno ese vídeo e aprendido mucho gracias
I love watching this! Great job, congratulations!
You do amazing things with very simple things🌹
🙏🙏🤞
Bravo...😊😊😊
Good job ❤
Show de bola
Owsm
Just found your channel and Subscribed. Very nice
Chế hay
Thanks,I like it.😊
🙏❤
🤞❤
@@Aryanmade777887min677
Good
Nice bro I love this idea a lot 👍🏾
Thanks bro🙏❤️🙏
I consider this a little dangerous since the welding material can melt with the heat
Like 1000 :D
🙏❤
THIS IS VERY DANGEROUS 😮
IT'S HAPPENED TO ME AND I WAS VERY LUCKY THAT MY EYES STILL COULD SEEM!
SPACER S ARE VERY Crispy and fragile.
MY EXPERIENCE AND HOPE TO HELP SOMEONE ❤😊
По факту - испортил сверло, затупил ножницы, сломал отрезной круг, загубил мотор. И все ради того чтобы криво отрезать кусок двпшки. Это медаль дарвина 😂😂😂😂 Ах да, еще бонусом получить в лобешник обломком диска. )))
I do t think that’s a fair evaluation. He’s re-using stuff that would have otherwise ended up in the landfill. Maybe using metal cutting side shears would have been better than scissors, but that hardly seems to be ammunition for a burn. If this were a project working with a kid, to help them learn how to make a tool, and to reduce, reuse and recycle ♻️ I think the lesson outweighs the “errors” you point out.
Having said all that, I was a little put off by the name of the page. While Aryana is a great name, the word “Aryan” has some negative connotations to it. I gave you the benefit of the doubt and decided to checkout the page, but I was half expecting a white supremacist to be the host. Sorry.
@@PlayNowWorkLater The video shows a complete disregard for safety precautions. What can this video teach children? How to pierce your fingers with a drill or how to quickly get a fragment of a disc into the eye ......? Think before you say something like that. He who has brains, let him use them! Sincerely....
@@wladimiralx6699 I hear what you’re saying. I don’t think people should be teaching kids bad habits. I’m just thinking, it’s a project I might have done with my kid, who really wanted to use my tools. I would have included safety with my kid in the actual project. But I like the idea of re-using stuff that would have normally been tossed. I can appreciate that aspect of this. Safety should always be forefront when working with tools. Agree 100%. Was there some disregard for safety here. Probably. But I think that giving some constructive criticism will perhaps make this channel grow, learn and just be better. Mocking and put downs are never constructive.
@@PlayNowWorkLater Completely agree with you. Only it should be competent, thoughtful, useful and most importantly, safe!
Motor model no?
Hi my friend, DC motor Rs 360