How To - CBR300R Clutch and Springs
HTML-код
- Опубликовано: 17 окт 2024
- Pretty basic video for upgrading the clutch. This engine has been put into a Honda Grom but the process should be mostly the same in a CBR300R. The only real differences should be in the plastics to gain access to the engine itself.
Get some Rage Fueled merch:
www.etsy.com/s...
Follow me on Instagram: / rage_fueled
Please check out Signature Products Facebook page and go to CR3Motorsports.com. Great products with even better customer service.
/ signatureproductsllc
www.CR3Motorsports
Theme music by Tyler Russenberger. Go check out his RUclips channel!
Every single vehicle I own the first thing I buy is a physical paper service manual.
You will never regret buying a service manual.
I usually do. I haven’t on my grom or the donor though.
Not sure why 10 ft-lbs stripped those holes so bad unless your torque wrench is out of spec. The shop manual says 12nm (9 ft-lbs). Update: just upgraded my clutch, and I used a torque wrench set to 9 ft-lbs. It wasn't even as tight as I can easily do with one hand on a 1/4 in ratchet.
I do not know why either. I checked my torque wrenches and they seemed accurate. That said, they are cheapo torque wrenches. I have no idea what happened with this unless that clutch basket had been over torqued previously. It was a used engine and the clutch was slipped really bad. Maybe the previous owner thought tightening it down would help. Do not really know unfortunately.
What year is this bike. Mine is a 2015, and i ordered the upgrades springs and the same plates. Also, that washer, you added do i need to do that?
@@mattstettler6131 the engine was supposed to be from a 2016. The washer was just one I had laying in the spare hardware drawer, I’m sorry I can’t give you any more info on that. Take that actuator into a lowes or something and start hunting for the correct sized one would be my next move.
The torque setting you are referring to is the central bolt not the 5 clutch retaining bolts.
I looked all over and watched a dozen videos and they all showed those bolts torqued that high. Internet can be great but man it screwed me on that.