Thank you for breaking down each part of the plumbing. That's what every single person that searches for these videos is trying to see and almost no one does it so bravo my brotha!
Most videos show the equipment but don’t really go into that much details on hoses, barbs, sizes etc., Great video!!! You explain everything very clear/calm and detailed. Thank you
After running some AR45 pumps. I'd recommend a 1 inch proportioning valve , on your SH in order to get a 50/50 SH/water mixture along with 1inch hose feeding the pump in order maintain the full flow capacity of the diaphragm pump.
if you kept the hose 3/4" on your reel (just like on the output port of the P40) for the P40 wouldn't you get better flow (gpm) than going to a 1/2" hose?
You don't need 3/4" hose. The manifold on the reel is only 1/2". It flows plenty with 1/2" hose. All you'll be doing is adding a lot of weight you'll get tired of pulling around.
Not worried about the ball valve because it's stainless. If it goes bad I already have a backup. I keep spares. www.google.com/amp/s/ussolid.com/amp/motorized-ball-valves1.html
Because the metering valve I currently have is 1/2", if I have it wide open it will give me approx a 3% mix. This is because my water is 1". If you want a stronger mix then I would pinch my water halfway with the ball valve and leave the bleach wide open.
Fantastic video...can I ask a question, as these machines throw a lot of water, does it come with a lever/knob that you can move, that you can regulate the pressure flow, from a trickle to full flow?
There is an unloader knob that reduces pressure. You can always turn it down but the flow will be there. This situation you can use different nozzle tips such as a fan pattern for a more controlled application.
all my parts you listed just arrived. Question for you. Can i hook the 1” water line to the top of my tank instead of using the 1” bulkhead coming out of bottom of tank. i dont need the extra line to go to my pressure washer
@@readykleenpowerwashing I don’t get this either, what’s the point of the bypass if you have to walk over to the machine to put it in bypass? Surely the point of a bypass is to bypass when you come off the trigger?
I usually don't allow it to bypass longer than a few minutes. Having a long bypass hose is what allows it to bypass without overheating. It's a mental counter in my head.
I don’t really see the point of the bypass, as it has to be manually turned to bypass? Whereas my pressure washer bypasses as soon as I’m off the trigger...
This system bypasses off the trigger like a pressure washer as well. The difference between this and a pressure washer is that it doesn't bypass back to the tank to continually keep the pump cool. It can only be in bypass mode for up to 10 min before the pump overheats.
@@readykleenpowerwashing I’ve just bought the p40 here in the U.K., not many have it. What do I need to have the bypass valve set to? As when I come off the trigger, there is still pressure on the Lance?
@@readykleenpowerwashing so basically when the bypass is open, it returns to tank, but when it’s closed, all the pressure remains in the pump and hose? I don’t understand what the point is? I’m not noticing any bypass when I’m off the trigger...
@@12988Jake bypass is automatic. The unloader automatically puts the system in bypass when a specific pressure is reached. Just like a commercial pressure washer that has a bypass hose running back to a buffer tank.
@@readykleenpowerwashing I know. I’m talking about, how do you clear out the 25’ bypass line whenever you go to change solution or switch over to plain water?
I have the P40 on order and greatly appreciate your video. Very helpful in better understanding how this gets connected. How many gallons of water do you go thru when washing an average 2500 soft house?
I honestly wouldn't know how many gallons of water I'd go through. There are too many variables as far as dirtiness, etc. Another thing is I hook up to the customers water to fill my tank while using it.
I was using what I already had available. I was upgrading from a 12v system and already had the proportioner. I used the check valve and proportioner valve since I already had it. If I need to get a stong mix, I just pinch off the water using the ball valve. Eventually I'll change it out to 1".
You can get an easier 6% mix running a bigger mixing valve. I'm only running a 1/2" valve because I already had it upgrading from my 12v system. I just pinch off the water halfway using the ball valve.
www.agspray.com/hose-reels-accessories/hose/pressure-spray-hose/pid14802/3-4-pvc-600psi-yellow-high-pressure-spray-hose/ It's by the foot so if you want 10ft you'll put qty 10.
Appreciate the concern but that pentair valve was a year old and never had an issue. I do have an updated video however where I did update everything to 1". The reason they Crack is usually being installed too tightly and not using the right stuff to seal it.
Everyone has their own opinion but I've receive plenty of thank yous, phien calls and messages from people who appreciate the video. If you have a better way of doing it then make a video and share it. This video is much older and since then I've made updated videos on this using a 1" metering valve and remote shutoff. Appreciate your feedback regardless if you agree with it or not.
Thank you for breaking down each part of the plumbing. That's what every single person that searches for these videos is trying to see and almost no one does it so bravo my brotha!
Most videos show the equipment but don’t really go into that much details on hoses, barbs, sizes etc., Great video!!! You explain everything very clear/calm and detailed.
Thank you
Welcome
Incredibly helpful video for anyone purchasing this system.
Very welcome. I didn't see anything out there in detail so I created one.
thank you. finally a video on how to do this.... thank you!!!!
@@scottgarvey8130 welcome
Super video! Thank you, sir.
After running some AR45 pumps. I'd recommend a 1 inch proportioning valve , on your SH in order to get a 50/50 SH/water mixture along with 1inch hose feeding the pump in order maintain the full flow capacity of the diaphragm pump.
Take a look at my updated video. Already done
if you kept the hose 3/4" on your reel (just like on the output port of the P40) for the P40 wouldn't you get better flow (gpm) than going to a 1/2" hose?
You don't need 3/4" hose. The manifold on the reel is only 1/2". It flows plenty with 1/2" hose. All you'll be doing is adding a lot of weight you'll get tired of pulling around.
Have a link to the 12v ball valve? and are you not worried about corrosion?
Not worried about the ball valve because it's stainless. If it goes bad I already have a backup. I keep spares.
www.google.com/amp/s/ussolid.com/amp/motorized-ball-valves1.html
do you keep the ball valve wide open or close it some? what if i only want 2% mix how do i meter that with the water flow
Because the metering valve I currently have is 1/2", if I have it wide open it will give me approx a 3% mix. This is because my water is 1". If you want a stronger mix then I would pinch my water halfway with the ball valve and leave the bleach wide open.
ok thanks
Fantastic video...can I ask a question, as these machines throw a lot of water, does it come with a lever/knob that you can move, that you can regulate the pressure flow, from a trickle to full flow?
There is an unloader knob that reduces pressure. You can always turn it down but the flow will be there. This situation you can use different nozzle tips such as a fan pattern for a more controlled application.
all my parts you listed just arrived. Question for you. Can i hook the 1” water line to the top of my tank instead of using the 1” bulkhead coming out of bottom of tank. i dont need the extra line to go to my pressure washer
Yes you can. If your plan is to use a drop line into the tank from the top, it shouldn't be a problem. This is how my SH line pulls chemical.
Is it normal for the p-40 to always be in bypass mode even when on the trigger?
If you were in bypass on the trigger you wouldn't have any pressure.
@@readykleenpowerwashing I don’t get this either, what’s the point of the bypass if you have to walk over to the machine to put it in bypass? Surely the point of a bypass is to bypass when you come off the trigger?
How do you buffer for 10-15 min? Do you mix it in your bleach tank?
I usually don't allow it to bypass longer than a few minutes. Having a long bypass hose is what allows it to bypass without overheating. It's a mental counter in my head.
Could you have put the bypass line into the water tank ?
No because then you’ll fill your water tank with chemical mix.
@@readykleenpowerwashing aah , i see. Thanks
I don’t really see the point of the bypass, as it has to be manually turned to bypass? Whereas my pressure washer bypasses as soon as I’m off the trigger...
This system bypasses off the trigger like a pressure washer as well. The difference between this and a pressure washer is that it doesn't bypass back to the tank to continually keep the pump cool. It can only be in bypass mode for up to 10 min before the pump overheats.
@@readykleenpowerwashing I’ve just bought the p40 here in the U.K., not many have it. What do I need to have the bypass valve set to? As when I come off the trigger, there is still pressure on the Lance?
@@readykleenpowerwashing so basically when the bypass is open, it returns to tank, but when it’s closed, all the pressure remains in the pump and hose? I don’t understand what the point is? I’m not noticing any bypass when I’m off the trigger...
@@12988Jake bypass is automatic. The unloader automatically puts the system in bypass when a specific pressure is reached. Just like a commercial pressure washer that has a bypass hose running back to a buffer tank.
@@12988Jake the unloader knob can be set to whatever pressure you want according to what you're cleaning.
Where dose the by pass go ? Back to the tank? Because you have chemical and freshwater how does that split up
It goes back to the inlet side of the pump. Green hose is bypass.
What keeps solution in the bypass line from contaminating what is in the applicator line when on/off the trigger?
There is a check valve for the water and bleach to prevent either or from mixing.
@@readykleenpowerwashing I know. I’m talking about, how do you clear out the 25’ bypass line whenever you go to change solution or switch over to plain water?
@@kristopherrainbolt2617 once you turn your bleach off and run just water, it will clean the line out and bypass water when off the trigger.
I have the P40 on order and greatly appreciate your video. Very helpful in better understanding how this gets connected. How many gallons of water do you go thru when washing an average 2500 soft house?
I honestly wouldn't know how many gallons of water I'd go through. There are too many variables as far as dirtiness, etc. Another thing is I hook up to the customers water to fill my tank while using it.
Can you do a video on how you wired in your switch to your chemical line
Whats the soap you use? How much soap to SH?
I use snotmenade. 1 ounce per gallon. I mix it in my chemical tank.
@@readykleenpowerwashing thank you
Thank you!! Which remote control do you use for the ball valve? Awesome video!!
www.amazon.com/dp/B082VCWVJ7/ref=cm_sw_r_cp_apa_fabc_pC4aGb2FYCVJY?_encoding=UTF8&psc=1
@@readykleenpowerwashing Thanks again. You're awesome.
@@jimland1447 no problem
Great video thanks
Why didn't you put a bleach line in to 1in? Just curiosity.
I was using what I already had available. I was upgrading from a 12v system and already had the proportioner. I used the check valve and proportioner valve since I already had it. If I need to get a stong mix, I just pinch off the water using the ball valve. Eventually I'll change it out to 1".
@@readykleenpowerwashing got it thanks for replying we will soon order this unite and set a remote valve on bleach line
Love the videos and got one ☝️ also
How did you find a reducer for the IBC tote (2" to 1") I've looked everywhere and can't find it
www.amazon.com/dp/B074N6PGGZ/ref=cm_sw_r_cp_apa_glt_fabc_KFR9QTNH280ZJVFWJVDY
@@readykleenpowerwashing thanks!
Great Video Are you Able to Pull a 6%
mix or are you limited to 5%
You can get an easier 6% mix running a bigger mixing valve. I'm only running a 1/2" valve because I already had it upgrading from my 12v system. I just pinch off the water halfway using the ball valve.
How is your p40 holding up.
Doing well. November will be 2yrs owning it.
Where did you find the outlet 3/4 hose I can't find anything
www.agspray.com/hose-reels-accessories/hose/pressure-spray-hose/pid14802/3-4-pvc-600psi-yellow-high-pressure-spray-hose/
It's by the foot so if you want 10ft you'll put qty 10.
Looks good but get rid of that pentair valve. They all Crack down the seams and very hard to find when you have a air leak...
Appreciate the concern but that pentair valve was a year old and never had an issue. I do have an updated video however where I did update everything to 1". The reason they Crack is usually being installed too tightly and not using the right stuff to seal it.
Have a couple question for you. Can I have you email so I can send this questions? Tks
Readykleenpowerwash@gmail.com
I don’t think anyone is gonna use this design. Way to must connected that don’t need to be connect.
Everyone has their own opinion but I've receive plenty of thank yous, phien calls and messages from people who appreciate the video. If you have a better way of doing it then make a video and share it. This video is much older and since then I've made updated videos on this using a 1" metering valve and remote shutoff. Appreciate your feedback regardless if you agree with it or not.
that us solid valve wont last for bleach
Video is old but it worked fine the 6 months insured it. Been using a Teejet valve.
@@readykleenpowerwashing mine locked up in about two weeks
@@Johnnyreengo rinsing is the key after every use. Never gave me a problem.