Just finished the installation on my Burgman 400 (2009): work as advertised! I just added a 1A fuse after the diodes and an on/off switch so I could mute the buzzer if need be. There was no common ground for the brakes on the right side. So I just tapped the brake ground on the left side and everything work all the same. Thanks very much for you guidance, I am very happy with this safety mod!
Happy it all came out good. Noting worse than not knowing your blinkers are on. On another note I installed a flashing brake light bulb for more safety. You can buy them on Amazon. Just unplug your stock one and plug in the flashing one. That easy. 👍 Every time you apply the brakes it will flash three times then go solid. Good safety feature. Enjoy John
I would think it would work. The only thing I can think of that might be a problem would be if your turn system was tied into a on board diagnostic program that reads current and amperage draw when the system is being used. Usually with that type of system there are thresholds that are monitored and if it goes outside of the thresholds it will throw a code. This mostly exists in newer cars and trucks. I think you will be okay.
Thanks very much for this very clever and usefull system: I am old too so it will improve my safety a lot at a minimal cost. Starting the mod as soon as I receive the beepers!
Just finished the installation on my Burgman 400 (2009): work as advertised! I just added a 1A fuse after the diodes and an on/off switch so I could mute the buzzer if need be. There was no common ground for the brakes on the right side. So I just tapped the brake ground on the left side and everything work all the same. Thanks very much for you guidance, I am very happy with this safety mod!
Happy it all came out good. Noting worse than not knowing your blinkers are on. On another note I installed a flashing brake light bulb for more safety. You can buy them on Amazon. Just unplug your stock one and plug in the flashing one. That easy. 👍
Every time you apply the brakes it will flash three times then go solid. Good safety feature.
Enjoy
John
@@johnnunes7935 another great idea that I will copy! Would you have a link to that specific bulb that fits Burgman?
@@gervaisdube1843
a.co/d/9beJFTI
@@gervaisdube1843
Make sure you remove one of your bulbs and check the numbers on it before you order.
Do you see any reason why this wouldn't work on my Honda VTX?
I would think it would work. The only thing I can think of that might be a problem would be if your turn system was tied into a on board diagnostic program that reads current and amperage draw when the system is being used. Usually with that type of system there are thresholds that are monitored and if it goes outside of the thresholds it will throw a code. This mostly exists in newer cars and trucks. I think you will be okay.
Thanks very much for this very clever and usefull system: I am old too so it will improve my safety a lot at a minimal cost. Starting the mod as soon as I receive the beepers!