That Vibration/rattling sound is coming from the rear metal number plate stick a 2 way tape between that and the point where it's touching the rear mud guard Which would fix the issue
@@motogspot Few parts to be replaced by KTM Like the front Caliper Mounting bolts which now are slightly longer and KTM is replacing them free of cost The other is the Fuel Pipe which is a new design and should fix any uneven fuel supply issue also replaced free of cost by KTM Check with your nearest out let There are a lot of videos on this
dheeraj_nadimpalli yes they did the front calliper bolts before I picked it up and am currently getting the cat delete pipe to give it a better sound, wouldn’t mind some bars for the side if it was to be dropped 🤣
@@motogspot just like any bike,why they don't come out sounding good is because that's their way of getting more money out of everybody that buy's a bike,👍🏼💯
are you pointing to the little rattling noise at the very end of the revving sound? Something like a screw rattling within a metal plate? If yes then glad to know it is not an issue only for me. Its been making me go crazy over the last couple of months
They are overpriced for what you get and the sound doesn’t change a whole lot, $990, side bags are just cheap hard shell bags off eBay but have done well so far 😀🤘🏻
Looks good and sounds throatier than stock. You need to adjust the carbon fiber protector because when you rev, it touches the exhaust , making that awful zzz sound. I have the same and I added two extra washers from the inside to give it more space.
Hint hint don't be surprised when the baffler comes out it's still quiet, should sound a touch deeper. You'll need to run full exhaust to get a note, the cat is to blame. Good job m8 : )
I didn't really notice a lot of sound difference but the weight difference will help I think that you need to Get out and get some dirt but don't forget just like on the street Dress for the slide not the ride if you're not used to riding on dirt he will fall down a lot I did not notice if that had a wrap around hand guards or not but if it doesn't You should definitely get some
At the risk of being a bit picky. Metric bolts are described by their thread size and not the size of spanner used. So they are actually M8 bolts. May not sound important but if someone ordered up a 12mm bolt to replace a lost one it would be way to big for the job. Also M8 bolts can commonly be found with both a 12 or 13mm head so it can get even more confusing. Otherwise, great video.
Looks easy (when you know how to!) Did you need to re-map for the new exhaust? Also, you missed the mandatory “no exhaust” sound test! 😜 Thanks for sharing!
Looks ridgey didge G 👍👍👍👍👍. I think those “rings” you had trouble with were from ur bedside drawer next to the lube stash ...... 🤔🤔🤔🤔🤔 ..... 😂😂😂😂😂😂🤣🤣🤣🤪👻😈🏃🏻♀️💨💣. Faaaaaaaaaark ....... I’m havin a blast!!!!!!!!!!!!!!! 🤷🏻♀️😬😆🤪😂😂😂👋👋👋😉
😈😈😈😈😈😈. Aren’t you due for ur shower soon 🤷🏻♀️. Will ya hurry up 🙄🤬. I’m gettin pins and needles in mah legs ...... it’s bloody uncomfortable out here in the bushes 🙄🙄🙄🙄🤪🤪🤪🤪🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Not as much of a difference then I thought. But personally I’m happy by that since I rather a quitter bike off road to keep the serenity and annoy as little people as possible
Thanks for the easy to follow install video! I look forward to getting my Akrapovic slip on for my new Adventure. .7 kilos is a significant savings in weight. I had an Akrapovic on my 390 Duke and it was a significant improvement...ruclips.net/video/MOTxjNMuhus/видео.html
Overpriced, there are better alternatives out there. Anyways the first thing you need to upgrade on this bike is the ECU as the mapping on the stock is horrible.
Absolutely overpriced and wish I had known earlier, I would have gone for something different knowing what I do now, yes I do need to remap the ecu aswell 😃👍
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Wow that looked really easy. Hats off to KTM for making working on the bike a lil bit easier.
Absolutely, couldn’t be easier G 😃👍
I'm very mechanically inept and to see how easy it is to install is super cool
i know its two years old but can you please do a short video using a DB meter. so that i could purchase the exhust for my 390adv
You made it look really easy to install. Looks and sound better!
It certainly was buddy, just need the cat delete pipe just to give it a bit better note. Stay safe mate 😃👍
Buenas, por favor, me podrías decir cual es la marca y modelo de las maletas laterales de la moto ??
Nice and easy, love it when a plan comes together
Haha so do I, thanks Paul 😃👍
That Vibration/rattling sound is coming from the rear metal number plate stick a 2 way tape between that and the point where it's touching the rear mud guard
Which would fix the issue
Thanks buddy I will do that, was driving me nuts, appreciate your help thank you 🙏🏼😃👍
@@motogspot Few parts to be replaced by KTM
Like the front Caliper Mounting bolts which now are slightly longer and KTM is replacing them free of cost
The other is the Fuel Pipe which is a new design and should fix any uneven fuel supply issue also replaced free of cost by KTM
Check with your nearest out let
There are a lot of videos on this
dheeraj_nadimpalli yes they did the front calliper bolts before I picked it up and am currently getting the cat delete pipe to give it a better sound, wouldn’t mind some bars for the side if it was to be dropped 🤣
@@motogspot Any luck with that cat delete pipe or headers plan? Staying tuned.
Sure sounds a lot better, good work brother as always 👍🏼💯
Thanks buddy sure is better than the stock 😃👍
@@motogspot just like any bike,why they don't come out sounding good is because that's their way of getting more money out of everybody that buy's a bike,👍🏼💯
This is the perfect exhaust for KTM 390 Adv
Definitely looks better. :) I hope you're enjoying the new ride !! Cheers ! :)
I am thanks Randy 😃👍
What's the model number if any and what's the cost.! Thanks 😊
Its comforting to know you also have the vibration noise with a few little revs 👍
It was doing my head in 😀😃😁
Haha yes I know, bloody single cylinder 😂😀👍
are you pointing to the little rattling noise at the very end of the revving sound? Something like a screw rattling within a metal plate?
If yes then glad to know it is not an issue only for me. Its been making me go crazy over the last couple of months
Nice one. Which is the Saddle bag you are using? Seems like it runs under the rear seat and easy to carry small tools without Saddle stay.. Thanks
Thanks buddy, I’m using just an eBay special saddlebag that sits pretty good on its own 😀👍
@@motogspot Do you have the link for this item pls. I couldn't find an item even closer to this one. It serves my purpose. Thank you in advance
@@hnsandeep I you go to ebay and search this item number it will come up, 303734093699 cheers 👍🏼
How much does it cost...and what brand are those side bags on both sides of rear seat...!!! Thnqq
They are overpriced for what you get and the sound doesn’t change a whole lot, $990, side bags are just cheap hard shell bags off eBay but have done well so far 😀🤘🏻
Hello, great video. Can you tell me which manufacturer the side pockets are from?
Hi, they are just a saddle bag off eBay 👍
Nice work mate you made it look simple 😁 hope you're enjoying your beast 😁
Thanks buddy I am just need to get her off road now 😃👍
That looks and sounds way better mate. 👍
Thanks V 😃👍
Looks good and sounds throatier than stock. You need to adjust the carbon fiber protector because when you rev, it touches the exhaust , making that awful zzz sound. I have the same and I added two extra washers from the inside to give it more space.
Absolutely buddy, my friend with the same bike and exhaust said the same thing, I will have to remove it thanks 😃👍
I’ve just bought this exhaust and it makes that rattling noise. I’m gonna try it on mine. Are these common for it?
El precio del tubo de escape?
Needs more noise, too quiet 😀👍
Hint hint don't be surprised when the baffler comes out it's still quiet, should sound a touch deeper. You'll need to run full exhaust to get a note, the cat is to blame. Good job m8 : )
Haha I know L, and drop another thousand dollars at least 😃👍
Can you provide the link to the exhaust please or akra model ?
I got the slip on through my ktm dealer, I believe it’s part of ktm power parts, hope this helps you buddy 😃👍
I think I would of gone for the full system and binned the cat. Looks nice the slip on.
I’m thinking that aswell buddy, thanks 😀👍
@Praveen Sampath 😁👍
What size Torx/star bit did the Akra kit require? Cheers!
Hey buddy, I’m pretty sure it was around a 5 or 6 mm star bit 😀👍
I didn't really notice a lot of sound difference but the weight difference will help I think that you need to Get out and get some dirt but don't forget just like on the street Dress for the slide not the ride if you're not used to riding on dirt he will fall down a lot I did not notice if that had a wrap around hand guards or not but if it doesn't You should definitely get some
Haha I’m expecting to drop it when I hit the dirt buddy 🤣🤣 as for the sound your right not a big difference 😬😃👍
How much lighter is it than the stock?
It was in the video, I think it was 200g lighter.
@@motogspot That's why I have not noticed it. 200g is marginal.
while im watching its easy to fix but in actual i think its hard hehehee,,i love the color of your bigbike boss,,im from Outback Outlaw friend
Thank you my friend, yes Outback outlaw is a great person 🙏🏼😃👍
I like your soft side bags, which one is it? are they available in Europe ?
Hey buddy, they are just off eBay, the soft bags but have a hard shell and are fantastic 😃👍
easy install on them so that's good .....I think the new system looks way better thumbs up man and keepm well
Thanks RK, definitely easier than the cbr 😃👍
@@motogspot And a change on the R1 man that took us forever
Next time instead of the drill, you can get a small wrench (or adjustable one) on that bit. I've had to do that before.
Aha wouldn’t have ever thought of that one Ian, you’d like the number plate, has your name on it 🤣👍
@@motogspot REALLY?! That's awesome! You think of me every time you RIDE?! I love it!!!!
Ian Landesman I do buddy, it’s there on the plate 🤣
Excellent sharing Bro. Have a great day 👊👍🙏🍺❤️
Thanks buddy, have a great day my friend 🙏🏼😃👍
@@motogspot thank you🙏😊👍👊🍺🍺❤️
Thank you 👍👍👍
Good stuff, mate!
Thanks buddy 😃👍
You never put the link to the shout out video ???
Oops sorry buddy 😬
It even looks way way better man very nice :) And much easier to change than my Fazer :D
Certainly was easy, need more noise though 😬😃👍
At the risk of being a bit picky. Metric bolts are described by their thread size and not the size of spanner used. So they are actually M8 bolts. May not sound important but if someone ordered up a 12mm bolt to replace a lost one it would be way to big for the job. Also M8 bolts can commonly be found with both a 12 or 13mm head so it can get even more confusing.
Otherwise, great video.
Thanks for the info buddy, best to have everything correct for these types of jobs 😃👍
How do you like it now that you've had a few rides with it?
Starting to really enjoy it now 😃👍
@@motogspot GOOD!
Looks cool , G. Did you invite the Chipmunks, I thought I heard them for a second?😁 It was certainly an easy changeover. Ride safe. Cheers
Haha yes they are around somewhere, thanks Moz 😃👍
Love watching videos from Australia- at least we do things in metric 😂😜
Haha thanks buddy 😃👍
Hi.. Which akrapovic is this
Just the slip on from ktm power parts buddy 😃👍
From where did you purchase it and what was the cost..?
Peter Stevens in Dandenong 😃👍 $9k
Hey mate I just installed my pipe but I managed to break that gasket🙄 Do you think that’s a major? Sounds sweet without it
I did the exact same thing buddy, they are definitely fragile, I haven’t had a problem with it 😃👍
😆 it seems a number of people have done this exact thing. Mine seems fine so that’s really good to know and nice video, well done.
Looks a lot better than the stock one, and 0.7kg is not to be sniffed at either! :-)
It certainly HD and any weight loss is a good thing 😃👍
@@motogspot 100% :-)
From where you purchase the exhaust ?
Through ktm power parts 👍
Looks alot better. Can't wait to hear some rolling shots of it. Akrapovic usually isn't to much louder than stock.
Thanks BPE, yes I thought it would have been more than that 😬🤣😃👍
And will you wait for KTM power parts for further upgradation..
Absolutely 😃👍
No sé en Estados Unidos pero en México es demasiado caro ese accesorio , ronda los 12 mil pesos mexicanos
Thanks for sharing 👍
😃👍
Looks easy (when you know how to!)
Did you need to re-map for the new exhaust?
Also, you missed the mandatory “no exhaust” sound test! 😜
Thanks for sharing!
No re-map needed buddy, haha I was thinking about the no exhaust sound 🤣🤣
Noice 👌👌👌👌👌👌
Certainly was HB 😃👍
Nice bike! I want one. :)
You must get one buddy, so much fun 😃👍
Thank you so much for Thai sub sir
Looks ridgey didge G 👍👍👍👍👍. I think those “rings” you had trouble with were from ur bedside drawer next to the lube stash ...... 🤔🤔🤔🤔🤔 ..... 😂😂😂😂😂😂🤣🤣🤣🤪👻😈🏃🏻♀️💨💣. Faaaaaaaaaark ....... I’m havin a blast!!!!!!!!!!!!!!! 🤷🏻♀️😬😆🤪😂😂😂👋👋👋😉
Lol how did you know about the rings, ok where’s the camera 🤣🤣🤣👀👀👀👀😬😜😃👍
😈😈😈😈😈😈. Aren’t you due for ur shower soon 🤷🏻♀️. Will ya hurry up 🙄🤬. I’m gettin pins and needles in mah legs ...... it’s bloody uncomfortable out here in the bushes 🙄🙄🙄🙄🤪🤪🤪🤪🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
I just had to edit cos auto correct put PUNS and needles in my LARVAE 🤷🏻♀️😆😆😆😳😳😳😳😳 .... sounds about right 🤷🏻♀️😆🤪😂😂😂😂😂😂😂😂😂😂👋🤣🤣🤣🤣🤣🤣🤣🤣🤣🤪🤪🤪🤪
Heck yeah really easy
Too easy buddy 😃👍
Not as much of a difference then I thought. But personally I’m happy by that since I rather a quitter bike off road to keep the serenity and annoy as little people as possible
Haha it’s not really that different at all buddy, and your right, try not to annoy to many people 🤣😃👍
Not as much of a difference *_thAn_* I thought.
Oh crap!! I didn't know you had an almost real dirt bike...😜😆😆
Lol yes almost real buddy 🤣🤣😃👍
Jak dla mnie brzmienie bardzo zblizone do oryginalu
Looks different... but sounds the same!
Yes I was very disappointed with it considering it was nearly $1000 ☹️
only difference is the smoothness.
Absolutely 😃👍
Ready to Race for Adventure Bike.
The sarcasm is way too high 😂
Hahaha 🤣🤣🤣 it certainly is 🤣😃👍
@@motogspot when I saw the the Adv for first time even I thought the same thing. I mean ready to tour or explore would have been better.
@@cb6440 absolutely, would have made more sense buddy 😃
Ready to Race on a Adventure bike 😅😂
😂😂😂
Fuck that emissions control shit!
Sound ? 😂
I know I was so disappointed with this Akra 😬
@@motogspotyou should cancel the catalyst
Thanks for the easy to follow install video! I look forward to getting my Akrapovic slip on for my new Adventure. .7 kilos is a significant savings in weight. I had an Akrapovic on my 390 Duke and it was a significant improvement...ruclips.net/video/MOTxjNMuhus/видео.html
They kept stock exhaust so ugly. So that you buy new one. No much difference in sound and weight. 😐
Yes I was very disappointed with the noise the Akra made and yes the original is ugly 🤣😃👍
Hear no diff
I know I was disappointed with it and especially how much they are 👎🏼
Hey man new subscriber I believe you may have subscribed to me looking forward to more videos bro KeepSafe catch you later
Thanks buddy, much appreciated and also looking forward to seeing more 😃👍
Overpriced, there are better alternatives out there. Anyways the first thing you need to upgrade on this bike is the ECU as the mapping on the stock is horrible.
Absolutely overpriced and wish I had known earlier, I would have gone for something different knowing what I do now, yes I do need to remap the ecu aswell 😃👍
Nahh... i am kool with stocks..