Brake Light Bulb Replacement 2006 Mini Cooper

Поделиться
HTML-код
  • Опубликовано: 21 окт 2024
  • It's Super Easy To Change These Bulbs, only one nut and 2 clips.
    Changing the Brake Light Bulb In A 2006 Mini Cooper. Step By Step Tail Light Bulb Fix.
    Used Philips P21 for the brake light bulb.

Комментарии • 26

  • @sayeedchoudhury6183
    @sayeedchoudhury6183 2 года назад +2

    Thanks and many thanks! Couldnt have replaced the unit due to a cracked lens without this very helpful and clear explanation.

  • @bernardbarbour
    @bernardbarbour 5 лет назад +4

    Thank you Sir. Watched this video, pulled into the autozone parking lot and changed this bulb out quickly thanks to your video. much appreciated.

  • @Amy-pg3dj
    @Amy-pg3dj Год назад

    Very helpful, thank you! Successfully changed my brake light bulb thanks to this video.

  • @briankaskie7014
    @briankaskie7014 5 лет назад +1

    I appreciated the video and will comment on the clips... The Drivers Side I used my RIGHT hand for lower clip and LEFT hand for upper clip...upside down..LOL Once I got clips, 5 minutes to replace bulb, snap back in, and re-do nut. The Passenger side was all LEFT hand...tricky yes, as those clips are tough mudders. Thank you for video.

  • @DuranDuran31
    @DuranDuran31 10 месяцев назад

    Thank you it helped a lot I have a 2006 mini Cooper s John works. Got them out in about a half hour The right side or passenger side was a little more difficult because it was tighter. But thank you for the info I got it done

  • @Ankeneering
    @Ankeneering 2 года назад

    Yea, I just did this, it’s WAY easier to just use your hands to hold the clips together and pull out the circuit board with the bulbs. Mini made this a 10 second job including removing the panel and snaking out the bulb board backwards. No tools needed, no need to remove the housing and not even necessarily to disconnect the electric.

  • @veno3337
    @veno3337 4 года назад +2

    Easy to follow instructions! Thanks

  • @davidbryant3223
    @davidbryant3223 5 лет назад +1

    Thank you - this was very helpful - BTW the clips just pop off if you gently squeeze them.

  • @wegoforthejugular8831
    @wegoforthejugular8831 2 года назад

    Thank you for the video!

  • @olyademchuk4707
    @olyademchuk4707 2 года назад +1

    Thank you!!!

  • @Wanking_wanker
    @Wanking_wanker 4 года назад

    I could not even find the bolt my Cooper s convertible has a smaller hole and I can’t see into it well

  • @richardmotycka3709
    @richardmotycka3709 5 лет назад +1

    Could not have done the job w/o your video. Thanks. (And pay no attention to the quibblers.)

  • @josephdupont
    @josephdupont 5 лет назад +1

    I can't see anything I think you should get some more light and get the camera pyre and looking into the damn thing

  • @ajramos929
    @ajramos929 2 года назад

    No need to do that just take off the plastic light bulb holder. Spent 20 minutes for the clips but i didn't had any movement in it. So the short answer is take off the light bulb holder

  • @firefighter1c57
    @firefighter1c57 5 лет назад +2

    This is your idea of super easy??? I'd hate to see what kinda bulb change you consider difficult lol

    • @eurolottostar
      @eurolottostar 4 года назад +1

      Awful job on a mini convertible

    • @blowfishes
      @blowfishes 3 года назад

      Try replacing a headlight bulb in a Toyota Celica Gen7 😂

  • @peskachina
    @peskachina 3 года назад

    The real problem is that thise stupid clips scratch the paint when you push the light

  • @kaypea4874
    @kaypea4874 2 года назад +1

    sound awful