I’m glad that I found this video because I have one of those amps that is supposed to be delivered to me tomorrow and I’m happy to know exactly what to expect from it. Thank you for sharing this information with everyone.
Some people say these amps don't sound as good as say a Salt or JP amp. I'd like anyone's opinion especially if you have heard both. Amazing power, fantastic video. Thank you so much 👍😊
The sound difference between the Brazilian and Korean amplifiers it's basically based on the crossover set points. This is one of the things that's in the works here in the future in terms of sound quality for future amplifiers. The majority of Brazilian amplifiers have a more flattened response versus the Korean amplifiers having more filtering as well as a lot lower crossover set points.. With the right DSP, Crossover, and or Eq, you can tune these amplifiers perform "sound wise" just like the Korean sounds.
@@ThatsMrMark i agree totally thats why i run these amps i buy a nice dsp, an filter with the dsp not any the tara amp cross overs on there amps . I just didnt want to spend hudge money for amps to get the same sound .
Lol if people are comparing sound quality. The minute someone says salt or JP amps. I know they’re talking out the wrong hole. Those amps are not clean at all. Why would you even believe that!? both amps you mentioned have 1970s technology that is the worst for SQ. Come on man.
You think it’d be better too run half ohm on a 1 ohm version or run at 1 ohm on a 2 ohm version ? You think it’d have better luck not worrying about protect running 1 ohm on a 2 ohm version ?
If your 💩 isn't thoroughly upgraded through the electrical, you'll be upgrading it soon enough but not by choice. 81% 1ohm hell it was all impressive and I don't even like taramps. Great dyno 👍🤞
believable! wow. thats a kick in the face. however, at 1 ohm what is the duty cycle that it can handle? 10 minutes or can it run as long as you can keep it fed?
As long as you keep it fed. I have one in my 2002 S10 extended cab on 2 TRINITY Audio H series 12d1 wired down to .25 because of my box rise and it will beat the crap out of those 12 and I have been impressed with the TRINITY H12's.
@@TrendyBromando It takes power to make the power. I'm now running 90ah Cmax at 15.8-16v on 3 Trinity H series 12's now wired to 0.67 ohm. Clamped 13500 and doing a 153.31 at 37hz. I can demo full songs one after another with very little rest and no voltage drop. Going to be getting a JP93 soon and will see what that does. But so far I have been very impressed with the Taramps. Nuts for days. 💣
Sucks because I just bought a bass 8k taramps for around $500/$600 cant remember exactly but these are listed same place I bought the bass 8k and this amp is around $300. Im so confused unless the bass 8k has something this amp does not. I should have got this t amp.
@@Facekicker I kind of dislike the low impedance protect. I wish it was lower than 1ohm. My setup is wired to 0.3ohm and it will set itself into protect when really getting down into the low lows or on burps. Not a big deal but I am going to move to 4 15s in a 6th order and will be able to wire to 1 ohm but will need more than the 8k by then. I could just run a DSP with this other amp and have the power I need. Also just checked and they were on sale when I seen it last. It's the same price as the bass 8k now.
WOW Game Changer now those Soundigital engineers are scrambling around try to figure out how Taramps is getting that efficiency at that power at that impedance 😂 I love it. It might be a comeback time for Team Jiggawatt
A woofer grounded & blew my trinity 8k & Amazon happened to have a smart 5bass for 420$ on deal that very day so I grabbed it & it definitely puts out double what the trinity 8k was putting out at .5 plus it's been pounding for months now & the trinity lasted about 1 week running it at .5 which I know the trinity 8000.1 wasn't rated for but I figured with box rise I'd be OK
He needs to do each certificate and uncertified and dynamic at the same ohms and move on down to the next ohm.. it really ruins the next wattage Dyno ... SMH.
I don't want to hear nothing about them saying there not efficient 84% at 2ohm 81% at 1 ohm .
I’m glad that I found this video because I have one of those amps that is supposed to be delivered to me tomorrow and I’m happy to know exactly what to expect from it. Thank you for sharing this information with everyone.
Jason great video as usual! 👌🏿💯
Appreciate it!
That's some tremendous power this is the amp parker the bass head runs in his bass ride on the avatar stu subs
Some people say these amps don't sound as good as say a Salt or JP amp. I'd like anyone's opinion especially if you have heard both. Amazing power, fantastic video. Thank you so much 👍😊
Go watch barevids, he did a ab comparison. Taramps hd 10k vs jbl crown.
The sound difference between the Brazilian and Korean amplifiers it's basically based on the crossover set points.
This is one of the things that's in the works here in the future in terms of sound quality for future amplifiers.
The majority of Brazilian amplifiers have a more flattened response versus the Korean amplifiers having more filtering as well as a lot lower crossover set points..
With the right DSP, Crossover, and or Eq, you can tune these amplifiers perform "sound wise" just like the Korean sounds.
@@ThatsMrMark i agree totally thats why i run these amps i buy a nice dsp, an filter with the dsp not any the tara amp cross overs on there amps . I just didnt want to spend hudge money for amps to get the same sound .
@@georgeelve1058 I actually did see that video and still can't believe the results. 😮😳
Lol if people are comparing sound quality. The minute someone says salt or JP amps. I know they’re talking out the wrong hole. Those amps are not clean at all. Why would you even believe that!? both amps you mentioned have 1970s technology that is the worst for SQ. Come on man.
Heck yeah man the thing is beastly. Haven't heard of this amp until today. Thanks for sharing.
Been looking that that but was uncertain. Looks pretty good on the dyno.
Awesome video Jason!
Thanks!
O yeah! It's another nice amplifier. I just traded my 3 Soundqubed amps for 4 Audio Legion AL1600.1D amplifiers.
Wish done the t9000. Probably grab it up lol
Yeah buddy, I’d take 4 of the T9000s
Can you do the stetsom bravo bass flex 8k
Yes the summer is approaching (NY) need that inspiration 15k sheesh too much for me but this is asmr 😂
What does it do at .5 I have the .5 taramp
Should do the Banda 15k
Would you do an Nvx 2700.1?
You think it’d be better too run half ohm on a 1 ohm version or run at 1 ohm on a 2 ohm version ? You think it’d have better luck not worrying about protect running 1 ohm on a 2 ohm version ?
If your 💩 isn't thoroughly upgraded through the electrical, you'll be upgrading it soon enough but not by choice.
81% 1ohm hell it was all impressive and I don't even like taramps.
Great dyno 👍🤞
Quanto ele renderia a 1.33 ohms ?
believable! wow. thats a kick in the face. however, at 1 ohm what is the duty cycle that it can handle? 10 minutes or can it run as long as you can keep it fed?
As long as you keep it fed. I have one in my 2002 S10 extended cab on 2 TRINITY Audio H series 12d1 wired down to .25 because of my box rise and it will beat the crap out of those 12 and I have been impressed with the TRINITY H12's.
@@TrendyBromando It takes power to make the power. I'm now running 90ah Cmax at 15.8-16v on 3 Trinity H series 12's now wired to 0.67 ohm. Clamped 13500 and doing a 153.31 at 37hz. I can demo full songs one after another with very little rest and no voltage drop. Going to be getting a JP93 soon and will see what that does. But so far I have been very impressed with the Taramps. Nuts for days. 💣
@UnholyTrinityS10 be sure to let us know how the JP vs taramps does 🙃
@@hawaiianbasshead The JP93 was DOA and is now week 4 in the 4 to 6 week repair. I how I didn't purchase a $1500 paper weight.
@@UnholyTrinityS10 I was worried there were refurbished ones for sale as soon as they came out all of the JP amps basically
Wow dude ,thats big power . An the price on those im sure will go up . What a beast
Anyway you could test the cab 45 v2?
I'll see if I can find one
Can it be ran at 0.5 ohm? And what did it do?
What fuses would be needed for the positive runs?
600 amp anl fuses
Would the taramps chipeo 9k be a good option to run subs? Considering it has no crossovers.
Yes and if you want crossovers just use a dsp or headunit
Yes just use your HU crossovers
@@Facekicker Thanks Will Do
Are you going to Vegas
Absolutely
Can u test the 20,000 watt chipeo they say it doesn’t do are can’t do 20,000 watts and it takes 13 batteries to run it
@@willb7758 I'm not set up for high voltage.
@@Facekickerok thanks
Funny looking killdozer dude 😜
subscribed
Sucks because I just bought a bass 8k taramps for around $500/$600 cant remember exactly but these are listed same place I bought the bass 8k and this amp is around $300. Im so confused unless the bass 8k has something this amp does not. I should have got this t amp.
Bass8k has some benefits like subwoofer appropriate crossovers and low impedance protection.
@@Facekicker I kind of dislike the low impedance protect. I wish it was lower than 1ohm. My setup is wired to 0.3ohm and it will set itself into protect when really getting down into the low lows or on burps. Not a big deal but I am going to move to 4 15s in a 6th order and will be able to wire to 1 ohm but will need more than the 8k by then. I could just run a DSP with this other amp and have the power I need. Also just checked and they were on sale when I seen it last. It's the same price as the bass 8k now.
WOW Game Changer now those Soundigital engineers are scrambling around try to figure out how Taramps is getting that efficiency at that power at that impedance 😂 I love it. It might be a comeback time for Team Jiggawatt
You have no idea what you’re talking about!! lol!! Soundigital is releasing their new stuff and it’s millions of light years ahead of taramps .
I love when people make comments, especially the ones that are out of the loop. Lol!
@@guysgt5003how much soundigital pay you to lie
Taramps make rated power at 12.6 volts right?
Yes
Do these run at .5 ohm
@@TrendyBromando I know folks have, but I wouldn't recommend
Hey Man do dyno for people?
Yessir
@@Facekicker ok one of my friend has a amp they make it’s called Fanatikaudio
@@Bigpaul12345678 he can contact me through our website
Thanks
New Taramps chipeo 12k give you like 14k is pretty beefy
👍👍
Putting t9000. On 2 sundown xv3 12 😮😅😅😅 on good electric 320 amp alternator. Couple batteries....
What the hell are we powering with this menace????
I'd say almost double power on dynamic
I was wrong lol
Awesome Dyno!
Wow ❤❤
A woofer grounded & blew my trinity 8k & Amazon happened to have a smart 5bass for 420$ on deal that very day so I grabbed it & it definitely puts out double what the trinity 8k was putting out at .5 plus it's been pounding for months now & the trinity lasted about 1 week running it at .5 which I know the trinity 8000.1 wasn't rated for but I figured with box rise I'd be OK
You prehaps, were feeling religious that day you picking the Trin.
I thought the Trinity amp did rated?
Those fans 😬. Id have to swap them out for noctua fans if i ever go this route.
They definitely could be quieter.
I see you selling quite a few of these..it made the ratings look like chump change j.
He needs to do each certificate and uncertified and dynamic at the same ohms and move on down to the next ohm.. it really ruins the next wattage Dyno ... SMH.
I've tried it both ways and this is what is working for my channel
I’ll buy this any day over a super high price ( max out your credit card SALT AMP) !! FACTS and won’t even fit in my car
Wish you could dyno the Taramps Big Boss 8k first. 😬🫡
Soon, my shipment was delayed