Это видео недоступно.
Сожалеем об этом.
HUSQVARNA 120 Mark II - first start, first cuts, big wood test, improvements, tacho RPM and more....
HTML-код
- Опубликовано: 27 апр 2022
- Testing and improving the 120 MK2 from Husqvarna
#Husqvarna120MK2 #Husqvarna #120Mark2
Omg. What a huge improvement that made. It’s amazing what just a simple mm makes. Keep rocking out these awesome videos. Thanks again
Thanks for watching and comment!
🤝🤝🤝
@@poparamiro your very welcome 🙏
@@poparamiro I don't have the ability to mod it like you did, could I accomplish the same outcome by drilling a couple extra holes on the sides?
look closer to sawdust, I dont think, that there is huge improvement, only sharper chain ;)
WOW! what a difference! I have on old 235 that is pretty gutless, thinking of modding the muffler but I've been putting it off. but now I see just how much better that saw can be!
Yes, in stock form it is bad...
Thanks for watching and comment!
Watching this video tells me two things. Husqvarna really plugged up the muffler on this saw, so a quality muffler mod does wonders to improve performance. Also, for a non pro 38cc saw with a quality muffler mod, it really rips.
Video is well done and tells an important story.
Thanks!
All the best!
Dude, nice! I have the previous model, the 240, and it has been a good little saw! After a couple hundred tanks it still runs, and you can bury the 14” bar in green oak. I muffler modded mine and it still sounds terrible, but it has cut a LOT of wood for me. Cheers, friend!
Thanks for watching and comment friend!
All the best!
Hi Poparamiro
That muffler modification that you did turned that little 38 cc garden saw into a great lightweight little gasoline axe .
Well done.
Hi!
Thanks for watching and comment!
All the best!
Hi Poparamiro
Did you do a timing advance on the flywheel to get more performance from the 120 mk11?
look closer to sawdust, I dont think, that there is huge improvement, only sharper chain ;)
does this modification affect the life of the saw or fuel or chain consumption?
O schimbare radicală după MM💪💪💪
Din pacate performanta stoc e foarte proasta...
Numai bine!
Ce kit de ascutire pot folosi pt lantul ei?
Mine was a bit boggy out the box few tweeks n its decent, makes meat out of a stihl 170!!
I have the little husky 135 mk2 aswell, thats an absolute ripper!
Mine was also boggy...
Thanks for watching and comment!
9:01 you best man I love
All the best!
@@poparamiro no u best human
@@user-ec7yr8up1m 🤝🤝🤝
Cred ca trebuie sa dam mai multa atentie acestor scule de pensionari in viitorul apropiat,pe cand 💊💊💊 nu-si vor mai face efectul 😁
Spor in continuare 👏
Cu siguranta ....😁🤣💊
Toate cele bune!
🤝🤝🤝
In acest videoclip am observat cat de mult limitează toba din fabrica și asi vrea sa îmi spuneți dacă este bine sa fac MM la orice tip de drujba.SPOR LA TREABĂ SI MULTA SANATATE !!!!💪💪💪
Un muffler mod facut bine este benefic pentru orice drujba, dar nu la toate aduce un spor consistent de performanta...
Toate cele bune și spor!
Not the best but I use it for a small limbing saw , it's nice with 4 to 5 in limbs.
True, thanks for watching!
Very well! Congrats!
Thanks, best regards!
ce leșinătură era la inceput... si ce isteață a devenit 👍👍
Da, stoc e ceva de speriat...
Toate cele bune și spor!
this is a K095 bar. A041 is original one. did it fit directly or any other mods to the sprocket?
Direct fit...
Verry nice Poparamiro! Would love to see how you open such a muffler! Great work my friend!
Thanks!
With the grinder...
Best regards!
@@poparamiro Thank you! Such like a Dremel or you use bigger Stuff? Do you put it together by soldering or welding? Sorry im new into such things you show it but i dont know how its called.. you do like a champ!!!!
@@stefanfalkenstein2083 bigger grinder for splitting mufflers.
Put together with brazing.
Thanks for kind words!
@@poparamiro Thank YOU Poparamiro for charing your knowledge! In some ways you make the best videos for me on youtube! A little appreciation is the least i can do for such nice work!
she purrs nice after a MM. still thinking to do the same to my Makita 32cc saw. but she bites already. wonder what it would be after a MM
Yes, much better after mod, but it is very heavy and the carb is unstable...
Curios about small Makita s
Best regards!
Looking at doing the muffler mod you showed here
My muffler to halves after you take it off is sealed together the two halves do not come apart they have been the edges over to keep it as one unit looks like yours just came apart to remove the inter baffle
Is that so?
You must braze it together...
@@poparamiro okay thank you
Un clip ce m-a impresionat. Ce transformare poți aduce unei drujbe mediocre 🤝
Dar primele tăieri parcă imi imaginam cum iți creștea tensiunea. 🤣😈
Clar mi a dat tensiune in forma stoc 🤣
Spor si numai bine!
Je vais l'acheter elle et bien ?
If you buy you must modify it...stock is very bad...
Здравствуйте! У меня бензопил немного. Champion 254 , stihl ms 661, дружба 2. Подскажите пожалуйста, стоит ли у китайской бензопилы champion 254 модифицировать глушитель?
Hi!
You don t know until you do it and test it.
In most of the cases it is worth...
Thanks for watching and best regards!
Salut ce mi-ai recomanda dintre husky 120 Marc ll și Stihl ms 170?
120 mk2 nu merge prea bine stoc
Modelul asta husqvarna 120 mark 2 se aseamana cu husqvarna 235x-torq 236x-torq si 240x-torq si bine inteles fiecare model din fabrică nu e reglat foarte bine
Buna ziua daca va trimit si eu o 555 ii puteti face un MM contra cost normal foarte bine le faceti pe toate ...spor la munca
Salut!
Da, se poate!
500 ron costa cu reglaj, test in lemn, tot ce trebuie.
Numai bine si spor!
The Lumberjack
Jackyl
Composition: Jesse James Dupree
I was born in the backwoods
Of a two-bit nowhere town
Fathered up some rock 'n' roll (baby)
So your mothers could boogie down
I ain't whistling Dixie
No I'm a rebel with a groove
All around the world the go 'round and 'round
When they dig on my new stainless steel sound hell, yeah
I'm said a lumberjack oh, baby
And I'm gonna cut you down to size
I'm a lumberjack baby
And you're the one you're the one that gets my prize
When you hear my motor running
You know I surely be coppin' a rise
Oh! So I'm gonna crank it up down the alley and jack it
Woo
I'm a lumberjack oh, baby
I'm a lumberjack now baby
I'm a lumberjack oh baby
Ohh I'm a lumberjack now baby
But I ain't jacked my lumber baby
Since my chainsaw you
Whether you like it or whether you don't woo
That's the way we like it
eu nasci no sertão
De uma cidade de dois bits em lugar nenhum
Gerou um pouco de rock 'n' roll (amor)
Para que suas mães pudessem dançar
Eu não estou assobiando Dixie
Não, eu sou um rebelde com um groove
Em todo o mundo, dá voltas e voltas
Quando eles cavam no meu novo som de aço inoxidável, oh, sim
eu sou dito um bebê lenhador
E eu vou te cortar no tamanho
Eu sou um bebê lenhador
E você é o único que recebe meu prêmio
Quando você ouve meu motor funcionando
Você sabe que eu certamente estarei tentando subir
Oh! Então eu vou girar para cima e para baixo cortá-lo
Eu sou um lenhador agora, amor
Eu sou um lenhador agora, amor
Eu sou um lenhador agora, amor
Eu sou um lenhador agora, amor
Mas eu não levantei minha madeira, amor
Desde que minha motosserra te viu
Se você gosta ou se você não corteja woo
É assim que gostamos
Thanks for watching and best regards!
Buna ziua. Am o Husqvarna 135 din 2006. Cat mă costă o asemenea îmbunătățire?
Salut!
500ron, include reglaj, test in lemn si tot ce trebuie...
Numai bine!
Salut si toata aprecierea pt video , ai putea oarecum sa ma ajuti cu un muffler mod contracost pt aceasta drujba? multumesc!
Salut!
Nu cred ca merita, costa 500 Ron...
Numai bine!
Hello 👋 what is ur opinion about husqvarna 262xp ? 😁
Do not test it much, but is a great pro 60cc class chainsaw....
Best regards!
Hi ram can you put a link to the guide bar your using same one u use in 5000p? Was fun watching u with such a small saw 😂
Hi!
The bar was buyed from ebay, it is no longer in production.
Thanks for watching and best regards!
Ouch. I would say I like my Jonsered 2041 better then that saw. Doesnt sound very good stock. Thanks for sharing
Thanks for watching and comment!
Merge bine după mm, dar fără nu prea ai ce face cu ea. Te salut 💪🤝🤝
Salutare!
Cum vine e doar pentru crengi 🤣
Toate cele bune și spor!
@@poparamiro Pai eu o am de 2 ani, numai crengi pot sa tai cu ea si scanduri...
@@valeriupreda8162 bine ca taie si de alea 🤣🤣💪
Please,Dolmar ps7900 showing
Great saw, do not have it...
Thanks for watching and best regards!
What bar is that your using
Oregon small mount 40cm, 1.3mm, 3/8
Thanks for watching!
Where can i get one of those bars
Efco/Oregon pro k095 3/8
@@poparamiro do you have a part number for this bar
Va rog frumos sa ma scuzati de indrazneala , puteti sa imi modificati si mie contracost muflerul? ...AS vrea sa cumpar acest model.
Nu iti recomand modelul asta...
Oricum modificarea tobei costa cat juma de drujba si nu prea merita.
Numai bine!
@@poparamiro Am cumparat-o din Austria cu 155 de euro a fost la extrareducere la mediamarkt....de aceea ....si aici in ro la acesti bani avem doar chinezarii urate rau de tot...
Păi ce faci nene strici drujba cu Muffler Mods 🤦♂️. Eu cred că se strica mai repede așa Stoc cum a fost pt că mergea foarte foarte bine dacă nu iera pornită🤣🤣🤣. Vai ce drujbă au făcut ăștia de la Husky,dar noroc că pe uni îi duce mintea și știe care i baiu la un gușter ca ăsta. Spor la treabă și multă sănătate Ram🤝🤝🤝.
Da, stoc, cat nu era pornita, mergea perfect 🤣
Spor si toate cele bune! 🤝🤝🤝
E made in china pe interior, eu am stricat rulmentii ca m-am apasat pe ea in lemn tare, carb si aprindere China, dupa ce a tunat-o parca nu o mai recunosc.
@@valeriupreda8162 Numai bine si spor!
Bellissima, poi con la barra efco 😂
Best regards!
👍👍👍👍
🤝🤝🤝
Salutare RAM 🤝
In forma stock este inutilizabilă dar după MM are un câștig enorm.
Spor la treabă și numai bine îți doresc🤝🤝🤝
Salutare!
Mulțumesc si numai bine!
Cat de prost mergea stock,parca era o mortaciune :)) Dupa muffler mod alta viata nene,mare defierenta. Te salut mestere!
Salutare!
Da, stoc e foarte proasta....oricum are probleme si dupa mod...
Numai bine si spor!
👍🏆🥇
🤝🤝🤝
Mecha pul elan aka
Thanks for watching!
Din pacate ai dat speed up la video dupa modificare,si nu stiu cu cat la %,dar se vede clar ca ai dat speed up,deoarece resturile de la taiere se misca mult mai repede. Asa ca nu cred nimic din ce ai facut in video. Nu e deloc realist..
Multumesc pentru vizionare si comentariu, te invit cu placere sa descoperi si alte probleme in clipurile mele !
non !!! pas de vidéo accéléré !!!!!!! ça aurait changé le son !!!! par contre il a affûté la chaine !!! les copeaux sont bien plus gros !!🤣👍
What bar is that? I'd love to get one for my 120
It is a oregon pro bar...
Best regards!
Eléggé gyenge ez a gép!