Brother, thank u for this video. i facing problem that Mode not changing (vehicle.mode=) it return same mode and dronekit.mavlink msg no responce like when i try to move in guided mode. if u have solution plz help me to give that. thank u for watching
Hello Rahul, Really nice video going through RaspberryPi OS installation and connecting with pixhawk flight controller. I am also working on build drone using RaspberryPi 4 with Pixhawk 2.4.8, but not able to find the cable to connector cable Df13 connector to Dupont connector. Can you help me from where to find that cable. Tried searching online but didn't got success
Thank you for your kind words. I had made this connector myself using df13 6 Pin Cable and 4 pin Dupont. Other way is that You can use female connector instead if don't have 4pin Dupont. Cut the other end of female connector and join the wires with df13 wires.
@@TechnoRahul143 Thanks Rahul for the suggestion...I can do that, I have been searching for this readymade cable online since last 2 days but didn't got success there. As you said I will make one such connector.
Thank you for the video, it is really nice, can you please tell me what if we use ROS and what is the difference between using ROS or DroneKit, thanks again.
Thanks for your valuable comment!! I am not really sure about ROS, never worked on that. However, you can check following links www.reddit.com/r/ROS/comments/lb9vu9/ros_vs_dronekit/ discuss.ardupilot.org/t/mavlink-libraries-which-one-should-i-use/84493
thank you soo much for this perfect tutarial . I was having problems with mavlink for 2 days. I solved it thanks to you.But ı have a question.at the last part you run the python script ,after that can we shut down the raspberry and try to run this code outside without ssh etc.
Thanks for your feedback!! To run script without ssh you may try running it on startup of raspberry Pi. www.instructables.com/Raspberry-Pi-Launch-Python-script-on-startup/
sir is raspberry pi 4 model B 2 gb ram varient is ok sir because 4 gb ram or 8 gb ram varients are not available because the shortage is going on sir please sir reply
Face recognition library I used work on raspberry Pi 2+. So most probably it should work on pi 4b 2 gb ram also... github.com/ageitgey/face_recognition
You can install Android 10 or below for raspberry Pi 3. You can download Android 10 from following link and follow the instructions...it should be similar to Android 12 as shown in Video ruclips.net/video/CBzUbuZ5pCo/видео.html .. konstakang.com/devices/rpi3/ By the way, This video on which you are commenting is not for installing Android
Dear I have just a question I need to create a drone delivery short distance with autopilot but it carrying weight between 5kg and 10 kg is it possible to create like this drone ?
Bro can you please tell what will be the expenditure of the whole drone. I only have raspberry pi 4b 8gb varient. What will be the cost of other components, can you please tell.
Hello sir, I have encountered some problems, I don't know how to solve them, can you help me?. When I am in mode STABILIZE, I can arm throttle, then I switch to mode auto, I have written the waypoints in the mission planner in advance, but the auto mode cannot take off, I can execute the auto mode with the remote control, but connected to the raspberries After sending, the way of sending commands from the terminal cannot be done in auto mode. STABILIZE> arm throttle STABILIZE> Got COMMAND_ACK: COMPONENT_ARM_DISARM: ACCEPTED ARMED auto STABILIZE> Got COMMAND_ACK: DO_SET_MODE: ACCEPTED AUTO> Mode AUTO AP: Mission: 1 Takeoff waypoint 1 AP: Mission: 1 Takeoff DISARMED Looking forward to your reply, thank you very much!!
copter 3.2.0 blew framewire not give permission to arm in auto mode ! if u over 3.0 go to All parameter tree and set DISARM_DELAY and AUTO setting change . it will work
Thank you!! I haven't tried with APM yet. I think it's possible theoretically but APM flight controller is not reliable as it's sensor are not that good... Better give it a try if u have APM.
i am a student of 8 th class the drone what you done , that is Automatic Amazon Delivery Drone with Raspberry Pi and Pixhawk Drone sir ,so i have completed the drone sir but i want to upgrade it to auto delivery drone so i want that script without face recognition on longitude and latitude i want to run that script in a laptop sir please will you guide us sir please even i mailed you sir
I haven't tried Instagram.. you may try.. By the way, This video on which you are commenting is not for installing Android Android installation video ruclips.net/video/CBzUbuZ5pCo/видео.html
Perfect video. Tons of info in one place.. Thank you❤
Thank you!!
@@TechnoRahul143 aapse contact kaise kare ..
Very very thankful
Thank you sir
Welcome!!
Brother, thank u for this video. i facing problem that Mode not changing (vehicle.mode=) it return same mode and dronekit.mavlink msg no responce like when i try to move in guided mode. if u have solution plz help me to give that. thank u for watching
भाई कोशिश करो। एक दिन आप बहुत बड़े RUclipsr बनेंगे।
Thanks for the motivation!! 🙂
Hello Rahul, Really nice video going through RaspberryPi OS installation and connecting with pixhawk flight controller.
I am also working on build drone using RaspberryPi 4 with Pixhawk 2.4.8, but not able to find the cable to connector cable
Df13 connector to Dupont connector. Can you help me from where to find that cable. Tried searching online but didn't got success
Thank you for your kind words.
I had made this connector myself using df13 6 Pin Cable and 4 pin Dupont. Other way is that You can use female connector instead if don't have 4pin Dupont. Cut the other end of female connector and join the wires with df13 wires.
@@TechnoRahul143 Thanks Rahul for the suggestion...I can do that, I have been searching for this readymade cable online since last 2 days but didn't got success there. As you said I will make one such connector.
Thank you for good information
Welcome
@@TechnoRahul143 know you mavsdk-python drone?
I am not sure about this... sorry
Thank you for the video, it is really nice, can you please tell me what if we use ROS and what is the difference between using ROS or DroneKit, thanks again.
Thanks for your valuable comment!! I am not really sure about ROS, never worked on that. However, you can check following links www.reddit.com/r/ROS/comments/lb9vu9/ros_vs_dronekit/ discuss.ardupilot.org/t/mavlink-libraries-which-one-should-i-use/84493
thank you soo much for this perfect tutarial . I was having problems with mavlink for 2 days. I solved it thanks to you.But ı have a question.at the last part you run the python script ,after that can we shut down the raspberry and try to run this code outside without ssh etc.
Thanks for your feedback!! To run script without ssh you may try running it on startup of raspberry Pi. www.instructables.com/Raspberry-Pi-Launch-Python-script-on-startup/
@@TechnoRahul143 ok.thanks again.I wish you success in youtube and the future
sir is raspberry pi 4 model B 2 gb ram varient is ok sir because 4 gb ram or 8 gb ram varients are not available because the shortage is going on sir please sir reply
Face recognition library I used work on raspberry Pi 2+. So most probably it should work on pi 4b 2 gb ram also... github.com/ageitgey/face_recognition
Raspberry Pi 3 se Android TV setup kar sakte hain
You can install Android 10 or below for raspberry Pi 3. You can download Android 10 from following link and follow the instructions...it should be similar to Android 12 as shown in Video ruclips.net/video/CBzUbuZ5pCo/видео.html ..
konstakang.com/devices/rpi3/
By the way, This video on which you are commenting is not for installing Android
@@TechnoRahul143 tk
Dear I have just a question I need to create a drone delivery short distance with autopilot but it carrying weight between 5kg and 10 kg is it possible to create like this drone ?
Bro can you please tell what will be the expenditure of the whole drone. I only have raspberry pi 4b 8gb varient.
What will be the cost of other components, can you please tell.
Min 25k
Hello sir, I have encountered some problems, I don't know how to solve them, can you help me?. When I am in mode STABILIZE, I can arm throttle, then I switch to mode auto, I have written the waypoints in the mission planner in advance, but the auto mode cannot take off, I can execute the auto mode with the remote control, but connected to the raspberries After sending, the way of sending commands from the terminal cannot be done in auto mode.
STABILIZE> arm throttle
STABILIZE> Got COMMAND_ACK: COMPONENT_ARM_DISARM: ACCEPTED
ARMED
auto
STABILIZE> Got COMMAND_ACK: DO_SET_MODE: ACCEPTED
AUTO> Mode AUTO
AP: Mission: 1 Takeoff
waypoint 1
AP: Mission: 1 Takeoff
DISARMED
Looking forward to your reply, thank you very much!!
copter 3.2.0 blew framewire not give permission to arm in auto mode ! if u over 3.0 go to All parameter tree and set DISARM_DELAY and AUTO setting change . it will work
Hats off brother love from nepal❤️
can we do the same programm in case of apm flight controller instead of pixhawk?
Thank you!! I haven't tried with APM yet. I think it's possible theoretically but APM flight controller is not reliable as it's sensor are not that good... Better give it a try if u have APM.
@@TechnoRahul143 sure, thanks to you
i am a student of 8 th class the drone what you done , that is Automatic Amazon Delivery Drone with Raspberry Pi and Pixhawk Drone sir ,so i have completed the drone sir but i want to upgrade it to auto delivery drone so i want that script without face recognition on longitude and latitude i want to run that script in a laptop sir please will you guide us sir please even i mailed you sir
Just remove the code related to identify_person() method
भाई इसे बनाने में कितना पैसा लगता है? कृपया मुझे बताओ
15k-20k, depend karta hai ki aapke paas konsa drone, flight controller and Raspberry Pi wagerah hai
भाई मेरे पास 2GB रेम है, रास्पबेरी पाई 4 क्या मैं दे सकता हूँ या नहीं?
Brother apse bat karni hai drone related pls kuch jada important hai request hai apse
Bolo Bhai kya baat hai?
@@TechnoRahul143 brother app Instagram id do apse drone se related kuch discuss karna hai mai kuch kaam kar raha hu drone k upar pls apki help chahiye
Brother aurdiopilot use kar sakte hai pixshaw flight control k jagha pe
Thanks for your job and time! Do you plan to made an English version?
Can you use Instagram
I haven't tried Instagram.. you may try..
By the way, This video on which you are commenting is not for installing Android
Android installation video ruclips.net/video/CBzUbuZ5pCo/видео.html