The voltage regulator was change because some people have burn their old/pre-2019 with 3S. The max voltage is also change in the manuals from 2S to 3S.
I think I paid £30 for the old TX Module and a R9MM receiver...Running the latest Flex firmware on 868mhz it works just fine for me, although I have not flown out beyond 2 kms as yet...As long as FrSky continue to provide the old ACCT R9MM receivers, I dont have a problem. For £30 it works fine. If I want to fly proper long range, I use my Immersion RC EZUHF, which has endless range. I certainly wont be buying any TBS Crossfire just to fly a Mini-quad round my head, thats just nuts.
Brought mine on pre-order back in 2018; £26 delivered and that included a R9MM receiver. Glad I didn't miss out on anything particularly special by being an early adopter though. :-)
I wish I'd never wasted $200+ on full Tbs XF Tx myself! I still have and use my old 2018 R9M Accst TX and R9 slim+'s and even on older firmware 180329 which I believe is 2 years old but honestly I've found to be best firmware version for me. I've also added a bluetooth module with inverter to my R9m and now I can use apps for live maps and antenna tracking! My Xf full has bluetooth module as well but getting it to actually work is damn near impossible and even when it does connect to anything it's to laggy. I'll keep my old R9M as long as possible. It's my go to period! People can't believe that I dislike XF and honestly I can't see how that's so hard to believe. First off I it's way over priced for what it is secondly most its features don't work properly and that to me is a no brainer. R9M 2018 works perfectly fine one just needs to learn how to use this system and updating them isnt a problem just make a harness and connect it when updating. Simple. Plus modding R9M is also simple. Try modding XF.. One more thing is TBS flat out lies about output power of full TX. Its nowhere near 2w with dynamic turned of and with proper test equipment my friend used we only got output of 862mw on 2w settings and dynamic OFF!!
I have one of the second generation pre-2019 R9M modules with the orange casing and not one of the first generation all black ones, so I just opened mine up and can confirm that the circuit is identical to Pawel's original one with the black casing. The only difference is that on mine, the two black header pin blocks top and bottom aren't present as they also aren't on the 2019 version, so those blocks originally got removed on the second generation of pre-2019 R9M modules.
From what I understand it would update your rxs wirelessly, and other features like rx match where 1 model works for all quads. I dont think their going to support accst after a while, but Im telling you what I read on instagram, Im not sure everything about support is correct.
@@RCOverKill yea I know but u still have to use a wire connection the first time.. I have never pulled a receiver to update once in a quad.. I just am not going to support frsky and their access protocol.. I'm still pissed how they dumb down my qx7.. Thanks for the info
I think the pre-access R9 hardware is going to be worth more than the new R9Access shxt Frsky is peddling now. I am still flying with the older R9 a little, but have installed Crossfire in 3 of my aircraft now with more to come. And yes I have had to reflash my R9 receivers a coupe times because Frsky released them with horrible buggy firmware that took them years to resolve. and it is a pita digging them out of my wings, unsoldeirng them, soldering to a futaba plug, reflashing, then re soldering and reinstalling them! A PITA
I already did exactly that. I bought the Crossfire Micro TX just last week along with some Crossfire Nano receivers. My pre-2019 R9M and R9MM will now just sit in their boxes gathering dust, or be used for experimental purposes. Thankfully I hadn't already invested very much money in the R9 system.
exactly the video i was waiting for, i was curious to see what changed in the R9M 2019 module, i have a Jumper T16 Pro on the way and maybe i will order an R9M 2019 module to test few things (i own 2 x R9M older modules) do u think there will be any possibility to port a version of Opentx which support Access to JumperTx (Opentx fork) so we can use Access protocol on our Jumper T16 radios (with R9M 2019 module) .... someone should work on this ;)
Frsky is out of their mind if they think Ill buy their stuff ever again. I bought a pre 2019 module recently because I didnt know any better. Why would they think anyone would want to replace all their Tx equipment, and buy frsky again.
Disabling Crossfire instead of supporting it with their own OS to avoid needing to use OpenTX was not only a low blow... it stopped their momentum growing and reversed it as Flysky comes into play with a very good radio.
I expect Frsky put different bootloaders or ID's so it is impossible to flash the old R9 with Acces, even if you would make some modifications to the IO ports /inverters. But really it is annoying I hope some hack appear soon, likley Frsky will stop bringing any feature updates for non Acces gear..
I have the access R9M 2019 with R9MX access receiver. I have a th9x radio with er9x that has r9m protocol but I am unable to use it because of the access protocol. Is it possible to use access models with ppm protocol?
@ Paweł Spychalski is there a compatibility chart of all this r9 mess anywhere on the internet -- what hardware (both receivers and transmitters) works with which firmware versions and rx to tx compatibility?
My og R9 with my slim+ on 1W and a 2S external battery works just fine for me. I just bought a 2019 R9M with a superT for 30 dollars on sale rn just for the hell of it.
Or at least warn us this is just a video looking at the boards without really any meaningful information. In some moods, I'd be fine with a video like this but I was expecting a bit more when I started watching. I'm still a fan of the channel.
Okay. So, slightly improved... Got it. What's the range of these R9's? What's the farthest one has done with the R9 system? Truly think Frsky shot themselves in the foot with "access," but we'll see soon enough. Their sales should reflect what sort of decision they have made... Thanks for the video. ✌🏻
Thanks for the insight, I am a bit frustrated with this system/switching to crossfire as soon as a new batch is in stock. Still based on how inconsistent mine have been I am considering adding a larger cap to one in the hope it will be more reliable at higher output levels..
whats the score with the r9m and r9m 2019 on the jumper t16. does it really matter which you get, whats are the advantages or disadvantages, is it just the receivers you connect to them or is there something else too it?
Its more about the way the company is doing buisness, their trying to shut out the use of crossfire(didnt work), and with Frsky 2019 you can no longer fly whoops(d8 ) without an xjt module, which means you would have to pull crossfire module, buy, and put in the xjt. Module. 2019 also does not support the xm+ yet, its supposed to be in the 1st update. Not playing nice Imo.
The biggest downside for me is the fact that ACCESS is not supported on QX7. So for me there is no point in upgrading. I consider that major fail because QX7 is like 2 year old radio model and already outdated. I might be more successful with my 2018 edition X-Lite with R9-Lite. Btw. R-XSR can be updated to ACCESS but the internal iXJT of X-Lite has no ACCESS fw either (and that is 1year old). Don't know what to think. 🤔 Considering Tango2 or even the whole DJI FPV bundle. Pretty pissed off right now. Sorry for my weeping here.
How do you know if you have a 2019 edition from the outside? Are all orange cases 2019? I have an orange case, but no label for voltage. It also doesn't have the pins on bottom and top on back. 2019 then? If works with PSX2, but be 2019? Not sure how to see if PSX2 on TX.
Just starting out with the combos they were selling cheap before releasing the 2019 models. Still coming to terms with running fport etc, and my first quad with r9 may fly this weekend. Only have the 2 r9minis's, can we still get the r9mm without access? and for how long. Maybe Jumper will copy the r9mm without access?
ok i have original r9 and a qx7s, what receivers can i use for it? i think frsky has discontinued the old ones. can i flash the older firmware on the newer receivers?
So will r9m2019 work in non access qxy? I don't care about access I just want to make sure I didn't waste $50 on a module I cant even use... the access module still works in non access mode right?
Don´t forget to tell the audience that they can throw their ACCST exclusive radio controllers into the bin if they want to use the new ACCESS module. They have to purchase a radio controlller which supports the ASSESS module! FrSky is ripping us off!
@@FPVUniversity lucky for me I just learned it "doesnt" require flashing ( Im not too successful in that area, I ruin 60% of my attempts on other things ) I just found this video of a gent doing the setup with the QX7 accst and the r9m 2019 version I am good to go ruclips.net/video/gwIZxannCbM/видео.html
Hi, I bought R9M 2019 + R9 mini, on the stock firmware I managed to bind them, now I updated R9M with access firmware V 1.3.0 and I updated r9 mini with access firmware V 1.3.0.Now R9M wont get into binding mode, there is just solid red light, I tryed to bind it with transmitter, and modul alone powered with externall battery with both dip switches on their ON possition and I am getting same results.R9M doesnt flash red light like it should when in bind mode. What should I do about it? Please help.
The one thing i do not like about my original R9M is that if your powering it from both the radio and a separate battery the module does not turn off when you turn the radio off. A few times now i have forgotten to unplug the separate 2s battery that powers it, obviously not good if you leave it like that for a long time. I think they should have included a solid state power switch inside the unit that cut the power from the external battery once the radio was powered off. Is it still the same on the 2019 model?
I had purchaed Xlite Pro and in July 2019 I had also purchased R9MLite. At that time R9M Lite pro is not out yet. Can i use R9M Lite with my Xlite pro access transmitter.
Yes. I have exactly that combination. I had to upgrade the R9M Lite to the Access protocol, not a big deal, read the instructions on the FRSky website. I have it working with one of my quads. No problems so far. The Pro version of the R9M Lite module will support a higher transmit power, but offers no other advantage I am aware of.
I have the R9M Lite on my XLite Pro. I have updated everything for Access and now on OpenTX 2.3 (which just came out of beta). Works fine for me. The bind on power on is very handy. Access seems to work at range.
@@EnglishTurbines So the general consensus is that the hardware of R9M and R9m/2019 is the same and FRSky are artificially limiting installing access compatible firmwares on non-2019 R9Ms ? I also have a second-gen orange R9M (non-2019) - installing access firmware on it does not fail, per se, but it still does not work with any of the receivers that I have, no matter what firmware / version I flash on the receiver. Hence me asking....
On the plus side all of my frsky radio gear is stable and I just flash once and forget about it forever. No access but meh, if frsky 2.4 was good enough for so long r9 flex as it is will probably do the job too.
I have original R9M and four mm receivers from original 'DISCOUNT OFFER' batch. never used, flashed or bound them as was waiting until I felt competent enough for flying further than half a field. My taranis is flashed with 01/2019 2.2.3 flex. So, in your opinion will this still work? is that what you use? Thanks in advance
@@retrodudefpv yeah nothing is going to stop working. I'm just going to make sure I have local copies of the firmware. I don't plan to switch away any time soon and I'm really not concerned. As far as the updates are its a solid 900mhz system. It won't stop being that without updates.
@@frasersteen Yes, if I get my R9 setup to work soon, then If I were to do any further upgrades, it would be a new radio and keep the frsky for the R9 setup and anything else I've already bound to it. Thanks for the info
Welcome to the Internet. Countless lobbyists are paid to feed Google's algorithm to try and control public opinion and spread disinformation. Wikipedia is now controlled by monitors that have strong ties to political agendas and of course money.
Paweł Spychalski I guess my question is that Is there a way to get D8 mode on qx7 ACCESS with r9m 2019?? It’s for a Emax that uses D8 mode only, or should I just send this receiver back (and get the ACCST) before it’s too late??
Paweł Spychalski you mean there is no D8 for ACCESS so this receiver that I have ( the Taranis QX7 ACCESS ) won’t be able to work with the EMAX Hawk that only uses D8. Is that correct?
Kurde ale masz polski angielski.... "th" nie mowie sie jak "d", naprawde :) Jestesz za2bistem facetem, ale naprawde wymaga poprawki, takie drobne blady mocno psuja impresje...
@@FPVUniversity" A niechaj narodowie wżdy postronni znają, iż Polacy nie gęsi, iż swój język mają." Nie mam urazy ale myślałem że....a nie ważne nagrywaj dla gęsi i innych. 😋😁
The voltage regulator was change because some people have burn their old/pre-2019 with 3S. The max voltage is also change in the manuals from 2S to 3S.
You are right.. i just burnt one last night with 3s.. Such a shame on cheap Chinese hardware design...
I think I paid £30 for the old TX Module and a R9MM receiver...Running the latest Flex firmware on 868mhz it works just fine for me, although I have not flown out beyond 2 kms as yet...As long as FrSky continue to provide the old ACCT R9MM receivers, I dont have a problem. For £30 it works fine. If I want to fly proper long range, I use my Immersion RC EZUHF, which has endless range. I certainly wont be buying any TBS Crossfire just to fly a Mini-quad round my head, thats just nuts.
Thats a steal. I also managed to pick up mine with super 8 and slim+ for £40 and never looked back xd
Brought mine on pre-order back in 2018; £26 delivered and that included a R9MM receiver. Glad I didn't miss out on anything particularly special by being an early adopter though. :-)
LoC Wowwwwww dang that is insane! And these days you can still flash the new receivers with old accst firmware too
I wish I'd never wasted $200+ on full Tbs XF Tx myself! I still have and use my old 2018 R9M Accst TX and R9 slim+'s and even on older firmware 180329 which I believe is 2 years old but honestly I've found to be best firmware version for me. I've also added a bluetooth module with inverter to my R9m and now I can use apps for live maps and antenna tracking! My Xf full has bluetooth module as well but getting it to actually work is damn near impossible and even when it does connect to anything it's to laggy. I'll keep my old R9M as long as possible. It's my go to period! People can't believe that I dislike XF and honestly I can't see how that's so hard to believe. First off I it's way over priced for what it is secondly most its features don't work properly and that to me is a no brainer. R9M 2018 works perfectly fine one just needs to learn how to use this system and updating them isnt a problem just make a harness and connect it when updating. Simple. Plus modding R9M is also simple. Try modding XF.. One more thing is TBS flat out lies about output power of full TX. Its nowhere near 2w with dynamic turned of and with proper test equipment my friend used we only got output of 862mw on 2w settings and dynamic OFF!!
I have one of the second generation pre-2019 R9M modules with the orange casing and not one of the first generation all black ones, so I just opened mine up and can confirm that the circuit is identical to Pawel's original one with the black casing. The only difference is that on mine, the two black header pin blocks top and bottom aren't present as they also aren't on the 2019 version, so those blocks originally got removed on the second generation of pre-2019 R9M modules.
I just cant understand why you would "upgrade" to access.. I'm happy with the R9 system I have now.
From what I understand it would update your rxs wirelessly, and other features like rx match where 1 model works for all quads. I dont think their going to support accst after a while, but Im telling you what I read on instagram, Im not sure everything about support is correct.
@@RCOverKill yea I know but u still have to use a wire connection the first time.. I have never pulled a receiver to update once in a quad.. I just am not going to support frsky and their access protocol.. I'm still pissed how they dumb down my qx7.. Thanks for the info
@@paulstone9755 believe me if I have to buy new radio equip it wont be frsky.
@@RCOverKillI'm with you:)
I think the pre-access R9 hardware is going to be worth more than the new R9Access shxt Frsky is peddling now. I am still flying with the older R9 a little, but have installed Crossfire in 3 of my aircraft now with more to come. And yes I have had to reflash my R9 receivers a coupe times because Frsky released them with horrible buggy firmware that took them years to resolve. and it is a pita digging them out of my wings, unsoldeirng them, soldering to a futaba plug, reflashing, then re soldering and reinstalling them! A PITA
Yeah... I guess I'm going to have to go for Crossfire. 😕
I already did exactly that. I bought the Crossfire Micro TX just last week along with some Crossfire Nano receivers. My pre-2019 R9M and R9MM will now just sit in their boxes gathering dust, or be used for experimental purposes. Thankfully I hadn't already invested very much money in the R9 system.
I
@@RCOverKill 🖖😊
@@MCsCreations I...I...I.. didnt finish that thought, lol. Im getting crossfire too. I just bought a pre 2019 r9 mod, so Im not happy either.
@@RCOverKill Exactly. 😕
exactly the video i was waiting for, i was curious to see what changed in the R9M 2019 module, i have a Jumper T16 Pro on the way and maybe i will order an R9M 2019 module to test few things (i own 2 x R9M older modules) do u think there will be any possibility to port a version of Opentx which support Access to JumperTx (Opentx fork) so we can use Access protocol on our Jumper T16 radios (with R9M 2019 module) .... someone should work on this ;)
Frsky is out of their mind if they think Ill buy their stuff ever again. I bought a pre 2019 module recently because I didnt know any better. Why would they think anyone would want to replace all their Tx equipment, and buy frsky again.
Disabling Crossfire instead of supporting it with their own OS to avoid needing to use OpenTX was not only a low blow... it stopped their momentum growing and reversed it as Flysky comes into play with a very good radio.
Thanks Pawel. Regarding the topic of long-range systems. What do you think of th QLRS radio system?
No idea never used it
Hi, I just get R9M 2019 with R9MM OTA. I tried on my taranis X9D+ But did not managed to make ACCESS work. Do you have clue why?
I expect Frsky put different bootloaders or ID's so it is impossible to flash the old R9 with Acces, even if you would make some modifications to the IO ports /inverters. But really it is annoying I hope some hack appear soon, likley Frsky will stop bringing any feature updates for non Acces gear..
I have the access R9M 2019 with R9MX access receiver. I have a th9x radio with er9x that has r9m protocol but I am unable to use it because of the access protocol. Is it possible to use access models with ppm protocol?
@
Paweł Spychalski is there a compatibility chart of all this r9 mess anywhere on the internet -- what hardware (both receivers and transmitters) works with which firmware versions and rx to tx compatibility?
My og R9 with my slim+ on 1W and a 2S external battery works just fine for me. I just bought a 2019 R9M with a superT for 30 dollars on sale rn just for the hell of it.
great video.some people get confused since the price for the black more expensive in Banggood
No offence, brother but can just get the cliff notes next time?
Or at least warn us this is just a video looking at the boards without really any meaningful information.
In some moods, I'd be fine with a video like this but I was expecting a bit more when I started watching.
I'm still a fan of the channel.
Okay. So, slightly improved... Got it.
What's the range of these R9's? What's the farthest one has done with the R9 system?
Truly think Frsky shot themselves in the foot with "access," but we'll see soon enough.
Their sales should reflect what sort of decision they have made...
Thanks for the video. ✌🏻
The range? Dozens of kilometers. If not absurdly stupid politics and firmware strategy, they would be really good
I'm looking to run the R9m2019 on my tx12 with a 3 inch quad. Will it work and which receiver is best for it?
Thanks for the insight, I am a bit frustrated with this system/switching to crossfire as soon as a new batch is in stock. Still based on how inconsistent mine have been I am considering adding a larger cap to one in the hope it will be more reliable at higher output levels..
whats the score with the r9m and r9m 2019 on the jumper t16. does it really matter which you get, whats are the advantages or disadvantages, is it just the receivers you connect to them or is there something else too it?
Its more about the way the company is doing buisness, their trying to shut out the use of crossfire(didnt work), and with Frsky 2019 you can no longer fly whoops(d8 ) without an xjt module, which means you would have to pull crossfire module, buy, and put in the xjt. Module. 2019 also does not support the xm+ yet, its supposed to be in the 1st update. Not playing nice Imo.
The biggest downside for me is the fact that ACCESS is not supported on QX7. So for me there is no point in upgrading. I consider that major fail because QX7 is like 2 year old radio model and already outdated. I might be more successful with my 2018 edition X-Lite with R9-Lite. Btw. R-XSR can be updated to ACCESS but the internal iXJT of X-Lite has no ACCESS fw either (and that is 1year old).
Don't know what to think. 🤔 Considering Tango2 or even the whole DJI FPV bundle. Pretty pissed off right now.
Sorry for my weeping here.
Why just keep ur qx7 n old r9 setup ...I am
@@flo-ridafpv5713 yeah, for time being I will leave it like that.
@@MPQuads237 yea buy spare r9 mm s ;), I just wish for a 900mhz band scanner on R9m , be soo dope
How do you know if you have a 2019 edition from the outside? Are all orange cases 2019? I have an orange case, but no label for voltage. It also doesn't have the pins on bottom and top on back. 2019 then?
If works with PSX2, but be 2019? Not sure how to see if PSX2 on TX.
There is label "R9M2019" on it. Logo is slightly different. See 1:30
On Open TX it has to say "R9M ACCESS" where you select external module type. IIRC only then the radio tries to use PXX2
I have the same, (second batch from "old"/non-2019 r9m), but the pcb is same with Pawel's black one. So both are old :S
Tnx for the info.
Could you tell more about replacing the pigtail?
Yea vid please I'd love to ugrade mine to RG316 sma
Just starting out with the combos they were selling cheap before releasing the 2019 models. Still coming to terms with running fport etc, and my first quad with r9 may fly this weekend. Only have the 2 r9minis's, can we still get the r9mm without access? and for how long. Maybe Jumper will copy the r9mm without access?
R9MM ACCESS version is still compatible with non-ACCESS radios, just flash the ACCST firmware.
ok i have original r9 and a qx7s, what receivers can i use for it? i think frsky has discontinued the old ones. can i flash the older firmware on the newer receivers?
yes, you can flash ACCST to all R9MM-OTA
So will r9m2019 work in non access qxy? I don't care about access I just want to make sure I didn't waste $50 on a module I cant even use... the access module still works in non access mode right?
Sure, there is ACCST firmware available for R9M 2019 (and ACCESS receivers).
Wander if we can just flash the 2019 R9m access firmware to the older R9m being its using the same chips?¿? All pins should b the same
The 2019 module works with de accsT ?
It has a buzzer?
Yea ? For what I never heard mine do anything but buzz lol
@@flo-ridafpv5713
It buzzes when binding
ZeroFPV is urs acccess ? Mines the OG. No beeps just buzzes louder on my qx7 as power goes up
@@flo-ridafpv5713
No. No Access. I've a pre 2019 R9M. I might be wrong and the sound is actually made by the radio!? :-) Not sure anymore.
Don´t forget to tell the audience that they can throw their ACCST exclusive radio controllers into the bin if they want to use the new ACCESS module. They have to purchase a radio controlller which supports the ASSESS module!
FrSky is ripping us off!
can the R9M 2019 version be used with the original Taranis QX7 or will it only work with the newer QX7 ACCESS model thanks
If you flash it with FLEX or other NON-ACCESS fiurmware then yes
@@FPVUniversity lucky for me I just learned it "doesnt" require flashing ( Im not too successful in that area, I ruin 60% of my attempts on other things )
I just found this video of a gent doing the setup with the QX7 accst and the r9m 2019 version I am good to go ruclips.net/video/gwIZxannCbM/видео.html
Trappy called it. Said they would have to make a new module. Lol
so frsky wants to sell us the same module with new power bec inside
I always used a 3s LiFe.....so, no plus for me.
R9 mini-OTA work with the old r9m?
3:47 stopped. Not changes. I think changes need search in electronic of access transmitters... But, what do you think about opentx_mk?
I was right! Improved buffer for 24 channels per ftame... X9d vs x9d 2019 need blust.. Differents in motherboard. Buffer...
Anyway, FrSky sucks
Hi, I bought R9M 2019 + R9 mini, on the stock firmware I managed to bind them, now I updated R9M with access firmware V 1.3.0 and I updated r9 mini with access firmware V 1.3.0.Now R9M wont get into binding mode, there is just solid red light, I tryed to bind it with transmitter, and modul alone powered with externall battery with both dip switches on their ON possition and I am getting same results.R9M doesnt flash red light like it should when in bind mode. What should I do about it? Please help.
Same problem here, have You get any solution for that?
Would there be any benefit to upgrading the antenna connecting cable to a thicker one?
One year R9M is discontinued now...WTF...
Well, did you loading the new Fw on the old module? 😆
The one thing i do not like about my original R9M is that if your powering it from both the radio and a separate battery the module does not turn off when you turn the radio off. A few times now i have forgotten to unplug the separate 2s battery that powers it, obviously not good if you leave it like that for a long time. I think they should have included a solid state power switch inside the unit that cut the power from the external battery once the radio was powered off. Is it still the same on the 2019 model?
I busted a 2s battery because of this. I made an Nimh replacement so I didn't have to sorry about it. Just a long list of issues with this bad product
I had purchaed Xlite Pro and in July 2019 I had also purchased R9MLite. At that time R9M Lite pro is not out yet. Can i use R9M Lite with my Xlite pro access transmitter.
Yes. I have exactly that combination. I had to upgrade the R9M Lite to the Access protocol, not a big deal, read the instructions on the FRSky website. I have it working with one of my quads. No problems so far. The Pro version of the R9M Lite module will support a higher transmit power, but offers no other advantage I am aware of.
I have the R9M Lite on my XLite Pro. I have updated everything for Access and now on OpenTX 2.3 (which just came out of beta). Works fine for me. The bind on power on is very handy. Access seems to work at range.
Wait, so there is no way to get ACCESS on my QX7?
no
@@paulstone9755 lame
What transmitter does this work in?
Can we use this module as ppm repeater.. I have turnigy i10 ..dont want to see it going..
Has anyone tried to flash the ACCESS firmware on the older R9M module and receviers?
You cant..... the hardware is different.
@@EnglishTurbines can you elaborate, please
@@jailbreaker010 I did....You can't load the new ACCESS firmware on the older R9M Modules....They are not compatible...It's not complicated.
@@EnglishTurbines So the general consensus is that the hardware of R9M and R9m/2019 is the same and FRSky are artificially limiting installing access compatible firmwares on non-2019 R9Ms ?
I also have a second-gen orange R9M (non-2019) - installing access firmware on it does not fail, per se, but it still does not work with any of the receivers that I have, no matter what firmware / version I flash on the receiver. Hence me asking....
@@jailbreaker010 It's not a general consensus, it's a fact, the hardware is different, like I said earlier....
I need an R9M and some R9 Slims. Will the 2019 R9N work in my T16 ?
if you flash ACCST firmware it works ! ruclips.net/video/LsqSM1gBEUQ/видео.html
Are there any IP addresses in the firmware?
Does the taranis x9 lite work with the old r9m?
My qx7 was accst..if i buy r9m access..it is compatible?
Flash R9M with ACCST Flex 2019-02 and it will work like a charm
@@FPVUniversity thanks for the faster response..i will receive the package today..
So can I use the 2019 R9m in my older non access x9D+?
yes
Paweł Spychalski thanks for the reply! Appreciate it!
On the plus side all of my frsky radio gear is stable and I just flash once and forget about it forever. No access but meh, if frsky 2.4 was good enough for so long r9 flex as it is will probably do the job too.
I have original R9M and four mm receivers from original 'DISCOUNT OFFER' batch. never used, flashed or bound them as was waiting until I felt competent enough for flying further than half a field. My taranis is flashed with 01/2019 2.2.3 flex. So, in your opinion will this still work? is that what you use? Thanks in advance
@@retrodudefpv yeah nothing is going to stop working. I'm just going to make sure I have local copies of the firmware. I don't plan to switch away any time soon and I'm really not concerned.
As far as the updates are its a solid 900mhz system. It won't stop being that without updates.
@@frasersteen Yes, if I get my R9 setup to work soon, then If I were to do any further upgrades, it would be a new radio and keep the frsky for the R9 setup and anything else I've already bound to it. Thanks for the info
I love ingenuity but this changing changing changing is getting old. I just keep what I got and done.
frsky spies disliking the video
Welcome to the Internet. Countless lobbyists are paid to feed Google's algorithm to try and control public opinion and spread disinformation. Wikipedia is now controlled by monitors that have strong ties to political agendas and of course money.
the wire looks crappy
I have a qx7. It works fine on accst. So what if I won’t get updates. Stop crying ❄️ snowflakes
Can these do D8? I need D8 mode please help someone😩😩
D8 is only a 2.4GHz. R9M is 868/915MHz
Paweł Spychalski I guess my question is that Is there a way to get D8 mode on qx7 ACCESS with r9m 2019?? It’s for a Emax that uses D8 mode only, or should I just send this receiver back (and get the ACCST) before it’s too late??
@@joeolison215 No, there is D8 support for ACCESS
Paweł Spychalski you mean there is no D8 for ACCESS so this receiver that I have ( the Taranis QX7 ACCESS ) won’t be able to work with the EMAX Hawk that only uses D8. Is that correct?
Kurde ale masz polski angielski.... "th" nie mowie sie jak "d", naprawde :) Jestesz za2bistem facetem, ale naprawde wymaga poprawki, takie drobne blady mocno psuja impresje...
no one wants to use ACCESS stay with ACCST
frsky is working hard at becoming irrelevant.
Proszę robić filmy w polskiej wersji językowej lub napisami
proszę nauczyć się angielskiego? Bez urazy oczywiście
@@FPVUniversity" A niechaj narodowie wżdy postronni znają, iż Polacy nie gęsi, iż swój język mają." Nie mam urazy ale myślałem że....a nie ważne nagrywaj dla gęsi i innych. 😋😁
Hello Pawel do you know, how i can Flash a r9m2019 access fcc to lbt?