Hi, Nice video, I got the same amplifier. Those transistors Q911,Q912 and IC 901 you replaced, what are the reference. Also you removed Q832. You replaced that as well. My Q911 is burnt. Can’t read the label.
do you also repair radios? 2017 rx450h radio turns on but nothing happens and a message appears that says a program can not be read please consult dealer
@@kuarashi United states It has a Sd card and im afraid that wont be the problem because I cant select anything not listen to the radio or play a cd I took the unit out the fan turns on but that is all. I cant get passed that message of a program can not be read please consult a dealer
Hello. I’m trying to repair a pioneer amp from a Toyota Land Cruiser prado 2010. No sound. The volumen can not move from 0. I don’t know if the problem is the amp or the head unit. If I disconnect all the wires from the amp nothing changes. Vol only can go to down 0 but no go up. I tried to clean the vol encoder but nothing changes. Can you help me please? I’m from Spain
Thank you for the video! Good job! I now have the same problem ... Tell me what was the reason, what parts were damaged? I can't find datasheet for this amp..
@@kuarashi Thx. The amplifier was repaired for me. We found a break in the node, just next to it there is a ventilation hole (near the connectors), moisture most likely got there.
Those transistors Q911,Q912 and IC 901 you replaced, what are the reference. Also you removed Q832. You replaced that as well. My Q911 is burnt. Can’t read the label.
Q11 Q12 i guiss is for mute, and Q832 is for protect if theres a one 3ic or 2ic main amp short the Q832 job is to shut off the system amp, while cancel the Q832 check all pin out of speak if theres a dc out then after follow the line that have dc volt replace main ic that have short or troubleshot it.
This would be so much more useful if you actually explained what you were doing......
lmaoo
Hi
I'm having same IS250 amplifier to be repaired, will you be able to do it??
Hi,
Nice video, I got the same amplifier. Those transistors Q911,Q912 and IC 901 you replaced, what are the reference. Also you removed Q832. You replaced that as well. My Q911 is burnt. Can’t read the label.
do you also repair radios? 2017 rx450h radio turns on but nothing happens and a message appears that says a program can not be read please consult dealer
@@eddiesandoval2234 you have to replace the hdd couse of this corrapted files, feome where are you sir??
@@kuarashi
United states
It has a Sd card and im afraid that wont be the problem because I cant select anything not listen to the radio or play a cd
I took the unit out the fan turns on but that is all.
I cant get passed that message of a program can not be read please consult a dealer
Do you know what I should check if I have a parasitic battery draw coming from this amp?
Check ACC or Switch ignition is turning off, from the head unit or main amp
Hello. I’m trying to repair a pioneer amp from a Toyota Land Cruiser prado 2010. No sound. The volumen can not move from 0. I don’t know if the problem is the amp or the head unit. If I disconnect all the wires from the amp nothing changes. Vol only can go to down 0 but no go up. I tried to clean the vol encoder but nothing changes. Can you help me please? I’m from Spain
The amp problem, send a clear picture to whatsapp +639694396891 inside of the of the amp back to back just open all
Thank you for the video! Good job! I now have the same problem ... Tell me what was the reason, what parts were damaged? I can't find datasheet for this amp..
send me an images of your amp inside removed the control board, marticiojomar@gmail.com
@@kuarashi Thx. The amplifier was repaired for me. We found a break in the node, just next to it there is a ventilation hole (near the connectors), moisture most likely got there.
@Nick Mondina it depend on fault of amp
@@kuarashi what should i do i haev water damage
@@KEEMZKEEMZ too much rusty and the print line circuit gone!! buy used amp
What cleaning supplies did you use?
thinner
I have my luxus amp trip problem what i do bro when turn onn radio just noise off volume is working from steering yel me problem
Clean it with the Lacquer Thinner with thootbrush both board
@@kuarashi done. But same problem on sound in speakers off trip
Share ur whatsup
Hello, does this amplifier have to be the original host to work
Yes it should be the same connector even deffrirent model
Hey I sent you email pictures of my amp it’s not working
Those transistors Q911,Q912 and IC 901 you replaced, what are the reference. Also you removed Q832. You replaced that as well. My Q911 is burnt. Can’t read the label.
Q11 Q12 i guiss is for mute, and Q832 is for protect if theres a one 3ic or 2ic main amp short the Q832 job is to shut off the system amp, while cancel the Q832 check all pin out of speak if theres a dc out then after follow the line that have dc volt replace main ic that have short or troubleshot it.
The important this amp must have a 5volt standby always even if its switch off
Send a clear picture were area of Q11 Q12 and ic 901
marticiojomar@gmail.com
@@kuarashi hello friend,where does the 5 volt come from?