Atomstack A20 Pro- Engraving Acrylic the Easy Way!
HTML-код
- Опубликовано: 6 окт 2024
- Atomstack A20 Pro- Engraving Acrylic Made Easy!
Welcome to the Laser Channel- Learn, Create, and Share!
In this video I’ll demonstrate how to engrave acrylic step by step.
This is a detailed video to show the settings I use, how I got the settings and then creating a fun LED acrylic light!
Product links (bookmark them for later!):
Atomstack:
shareasale.com...
Product links are tested safe and there's no extra fees if you purchase through the link!
Atomstack F2 Large Honeycomb:
amzn.to/3Sv4KxA
LED Base in Video- purchase acrylic separately:
www.jpplus.com/acrylic-led-light-base-with-wireless-remote
4 Piece LED Complete Set:
amzn.to/3IAUcIr
(this is a popular option)
Wooden LED Base-purchase acrylic separately:
amzn.to/3ZqrVvk
Dollar Tree Black Poster Board:
www.dollartree.com/black-poster-board-22x28/193024
Done like and subscribed. Thank you for making all your engraving video
Thank you!
Thank you for taking your time to make this interesting video. I enjoyed it very much.
You're welcome! Happy lasering!
Hi there how thick is the acrylic you used in this video? I have melted mine 🙂
Hi- I used 1/8" (3mm) acrylic. I ran a materials test chart to find the best settings for my setup. Thanks for watching and best wishes.
thanks a lot for that video. I have a S20 pro and i've a little scare to applied over the acrylic. My english is not good... could you indicate the material that you put under de acrlylic? thanks again for your response
You are welcome. Under the acrylic is black poster board- it is a very black thin carboard.
Hi, I'm new with this laser engraver. Is it possible to cut the clear acrylic with this Atomstack A20 Pro?
Hi! No, it's not possible to cut clear acrylic any laser diode machine; it does not matter the brand or power output. The laser diodes operate in a range that does not affect clear acrylic for cutting. To cut clear acrylic I recommend a Co2 laser- cuts clean through. Thanks for watching!
Hi, I have an atomstack s20 max.
The power of the laser is 18-20w.
They cannot cut plexiglass (acryl) 3 mm at all.
Is the problem that the laser power is low, or did I not set good parameters for cutting? I use the lightburn program
Hi- there's a couple of factors- Black cast acrylic cuts the best- white and defiantly clear do not cut with any amount of power. Slower speeds and medium to higher power settings tend to work best.
Hello! I am trying to cut acrylic but having a hard time finding my bearing and have been burning the acrylic. I have an atom stack x7 pro
Acrylic can be tricky. What type and color do you want to cut?
It’s clear and I have a black bottom for contrast
@@ursulich Clear acrylic is not able to be cut by a laser diode. To cut clear acrylic a Co2 laser is needed. Here's video with an entry level Co2 laser: ruclips.net/video/VnnLOgdzvQ8/видео.html
Can you etch say 2mm into black acrylic?
Yes- the A20 Pro can etch 2mm into black acrylic- it can also cut through 1/8 inch (3 mm) black acrylic with ease!
hello , i have the atomstack s20 pro, i purchased the extension kit, wiring was straight foward, but i have one single black wire that i'm not sure where to place it, it goes, i think to 1 of 2 ports, one is 5 volt and the other is 12 volt. it comes from the power switch. any ideas anyone ??
Hi... can i use WD40?
Wd40- I'm thinking you mean for cleaning correct? I haven't tried WD40 for cleaning- my hesitation to use it on acrylic is maybe it would fog or crack the acrylic over time.
Oh i see. Can i know that alcohol u use same as perfume alcohol sir? Because i dont know how type alcohol i want to buy
@@MawlaArt I use Denatured Alcohol- it's also know as stove fuel.
do you show how to engrave acrylic using GRBL software
Hi- no, I don't show the laser machines using GRBL. I use LIghtburn on all my machines.
@@thelaserchannel1 is cast or extruded acrylic
@@tcollins6969 It is cast acrylic from a quality and reliable source- Houston Acrylics. I'm not affiliated with but I order all my acrylics from them. Extruded acrylics will crack, bubble, or burst- it just doesn't work.