Another way of calculating IV flow is dividing the volume to be infused by the time(in minutes) then multiply by the drop factor.Example 800ml to be infused in 5hrs with a drop factor of 15.Answer... 800÷300×15=40gtt/min (make sure and convert your hours to minutes in this case I converted 5hrs to minutes which is 300mins)
Thank you for taking time out of your day to post this wonderful teaching video for beginners like myself- you rock at teaching and hope to see more of your videos. can you do some on ratio and proportions math? lol
This method could apply to any drop factor. The drop factor will only be 10,15, or 20 (macro) or 60 (micro). The drop factor is determined by the IV drop chamber used
Drop factor is number of drops to make 1 ml of infusion so multiply the total volume with drop factor and divide the result with total number of minutes you'll get the anwer :-)
@@aditya_anchal There are differences among various continents and countries, but the essence of calculating IV flow is the same. By the way, I had totally forgotten that I had made that comment, since in my faculty we use ml/hr and IV pumps. Hardly have I used the drops/min format, except in blood transfusions in patients with heart failure or compromised cardiovascular profile.
Wow, this just made it easier for me to understand this. Mind blowing! I have my PTCE in the morning and I'm getting last minute studying done. Thank you!
Dexamethasone is available as a 4mg/ml preparation; an infant is to receive 0.35mg. The volume needed would be a miniscule 0.08mL, which is very difficult to accurately measure. Prepare a dilution so that the final concentration is 1mg/mL. How much diluent will you need if the original product is in a 1mL vial and you dilute the entire vial? What is the volume of final dose to be measured?
a nurse needs to administer 6 ml of X medicine in a solution of 150 ml. At what rate would you set transfusion of the medicine so the patient receives it at 1.5 ml/ min? Please break this down for me
I learned something easier and not confusing formula...I hate math, fyi. I multiply hours to 60 minutes before i divide them to ml then multiply to drop factor equals the answer.
Hi. Thank you for sharing your video. I have a question though. On your 3rd example, what if I need to incorporate 32ml medication to the NSS, shoud I make it 132 instead of 100ml then do the math?
Hi please need help to solve this. Doctors order: infuse 50 mg of amphotericine B in 250 ml Normal saline over 4 hrs 15 minutes. Drop factor 12 drops/ml. What flow rate (ml/hr) will you set on IV infusion pump?
Farida Khan well there is 60 mins in one hour, but it depends what you are converging to/what the question asks. But most likely minutes in her case, since she was looking for drops/min.
Another way of calculating IV flow is dividing the volume to be infused by the time(in minutes) then multiply by the drop factor.Example 800ml to be infused in 5hrs with a drop factor of 15.Answer... 800÷300×15=40gtt/min (make sure and convert your hours to minutes in this case I converted 5hrs to minutes which is 300mins)
poker stunner thank you for your help..😊
Thank u
Simple and clear!
Bless you Poker Stunner. 🙏🏾🙏🏾
If not ask hour ,and continue drip ....so what do????
I'm doing my ANP pharmacy section at the moment, your videos have been exceptionally helpful. Thank you
Thank you so much. This video clarified content I’ve been trying to learn for weeks
Thanks ma'am you absolutely simplified everything is explain your explain is very nice 👍👍👍
Thank you so much you make it so easy to learn. You are appreciated, thank you!!
Thank you sooooooooooooooo much for this video,it helped me a lot.God Bless You and Thanks again.
Thank you for taking time out of your day to post this wonderful teaching video for beginners like myself- you rock at teaching and hope to see more of your videos. can you do some on ratio and proportions math? lol
T5t😂 to RCA cable 😂5
Best video I've seen on the subject!
Very easy to follow. Thanks and keep them coming
Thank you so much for this clear explanation..
For #1 there is a formula, which I find to be easier. drops/min = (volume in mL x drop factor)/time in minutes
Thank you After 11yrs This Is For Your Knowledge(From Africa 🇸🇴 )🙏
So glad to find this the night before our OB/Peds drug calc exam!
This is actually brilliant. Finally a light bulb has gone off in my brain.
The most easiest explanation ever. Thanks so much
I am going to watch this video over and over again untill the moring of my nursing math exam!!! thanks for the upload!
Your video is a ray of hope for all afraid of mathematics .
Wahoooo this is not easy but you makes it easy thank you so much appreciated from the bottom of my heart
This method could apply to any drop factor. The drop factor will only be 10,15, or 20 (macro) or 60 (micro). The drop factor is determined by the IV drop chamber used
Brillint! Thanks for giving such a great shortcut.
Nyc video
Straight to the point thank you !
@GanjaGuru91 the drop factor tells you how many drops for each ml. It is usually 20 for clear fluids and 15 for blood
Very well exlained. You should do meditation video's. You could talk about anything! your voice has made me drift away :)
Teaching method is good clearly understand
So simple ,best teaching ever
Thanks ...Your lesson are amazing
Thank you for this; it is very helpful. Love your accent too! :)
Yeah it is really good
So nice presentation tqqq
Perfect!! Thank you for your help!
I found it easier just converting the hrs to minutes and dividing that way and then multiplying by the drop rate. Cheers
It's easier to just convert the hours to minutes and then divide.
Drop factor is number of drops to make 1 ml of infusion
so multiply the total volume with drop factor and divide the result with total number of minutes
you'll get the anwer :-)
You are absolutely right!
Commonly, there are two types of IV Infusion set. These with 60 drops/min and those with 20 drops/min.
Actually in India there are two type.. micro (64 drops) and macro (16 drops)
@@aditya_anchal There are differences among various continents and countries, but the essence of calculating IV flow is the same.
By the way, I had totally forgotten that I had made that comment, since in my faculty we use ml/hr and IV pumps. Hardly have I used the drops/min format, except in blood transfusions in patients with heart failure or compromised cardiovascular profile.
Thanks you for your help . It was very easy to understand
I like the way you explained this & I'd love to see more of this... Thanks a bunch.
You absolutely simplified everything , I learned another method today, thanks a lot.
Learnt or learned??🤣💚🇳🇬🇳🇬🇳🇬
Straight forwards, I love this teaching.
Wow, this just made it easier for me to understand this. Mind blowing! I have my PTCE in the morning and I'm getting last minute studying done. Thank you!
Good Luck!
How it goes? I hope you made it!!! I have mine before end of this month so im a little nervous but im determined;)
You have a very nice voice. It's so soothing :)
This is so helpful, thank you!
Dexamethasone is available as a 4mg/ml preparation; an infant is to receive 0.35mg. The volume needed would be a miniscule 0.08mL, which is very difficult to accurately measure. Prepare a dilution so that the final concentration is 1mg/mL. How much diluent will you need if the original product is in a 1mL vial and you dilute the entire vial? What is the volume of final dose to be measured?
This is so clever thanks!!! would help at work :)
Very nice
We can also solve it by changing minutes into hours ....it also gave correct answer
Thank you very much for upload this video it helps me to for my nursing preparation. Thanks a lot .I from nepal
Nice and easy indeed. Thanks 🙏
Thanks for your effort
I find this the easiest way to compute drop rates! that’s because I don’t have to deal with very big numbers! Thanks a lot! :))
Really so easy to understand thank u
such a genius
Thank you for a refresher calculation
can you help me with this question?????????? whats the fastest and most easy way to go about solving this?
Most easiest explantion tnx
Thank you. This is amazing... :)
alexis rusca Hiiii
Thanks ur vedio is so helpful
Hye Miss why 125 suddenly divided by 3 , where the number 3 comes from???
a nurse needs to administer 6 ml of X medicine in a solution of 150 ml. At what rate would you set transfusion of the medicine so the patient receives it at 1.5 ml/ min? Please break this down for me
Due October
Well explained and thanks a million, i now will blame you for a good grade on the math part of my next test lol
Very nicely done..
Thanks very much. you made my day.
omg so glad i found this channel
thank you so much helps me alot
Very linthy
I learned something easier and not confusing formula...I hate math, fyi. I multiply hours to 60 minutes before i divide them to ml then multiply to drop factor equals the answer.
verry nice.. good video..
Thank you so much for this video!
Hi. Thank you for sharing your video. I have a question though. On your 3rd example, what if I need to incorporate 32ml medication to the NSS, shoud I make it 132 instead of 100ml then do the math?
Hi please need help to solve this.
Doctors order: infuse 50 mg of amphotericine B in 250 ml Normal saline over 4 hrs 15 minutes. Drop factor 12 drops/ml. What flow rate (ml/hr) will you set on IV infusion pump?
Very Helpful!! Thanks a lot
More video of gravimetric calculation
how we will calculate if we drop factor of 10 ( we know for 15 * 20) appreciate ur reply coz its very easy to understand
Well it’s always
Drop factor / 60
So if the drop factor was 10, it would then be 10/60... which is simplified to 1/6.
@@Batxohow we will calculate if we have drop factor 60 (paediatric chamber)
Farida Khan if you have a drop factor of 60, then it would be 60/60 meaning 1.
@@Batxo drop factor/60?
Plz explain about 60,is it minutes or seconds?
Farida Khan well there is 60 mins in one hour, but it depends what you are converging to/what the question asks. But most likely minutes in her case, since she was looking for drops/min.
This was amazingly helpful, and I'm terrible at math! Thank you!
RN in Training
85ml per hour. How to set pls tell me how many drops per minute
THANK YOU .
I understand that this is basic algebra, but it would help to show units while doing the calculations
How do you work out what Time it would take to deliver 200 mililitres using drip rate of 30 drops per minute
wow i've learned a lot in just 7:40 time! what more can u teach us when u're at school? :D nice one! thanks a lot!
Can you please explain what exactly is the drop factor? Thanks
I appreciate this,it did remind me
TQ very useful
thank u this is very easy explanation
Thank you so much for this video! Great Video #Frank
What is 60 that u divided in drop factor plz tell me
omg this more complicated just 100 divided by 50 =2 and multiple drip factor 20 so = 40 simple
If there isn't pure IV fluid, what should we do ?? How much drop factor??
Good work, I can teach my students. Thanks
Thank you so much!!!!!
Thanku sooo much it is tooo easy now for me
Thank you 🙏
very nic
Drop factor 15 = 4 and 20 = 3, where do these 3 and 4 come from??
Drop factor for blood is 1/4 =4
Drop factor for clear fluids 1/3=3
@@moni03asu oh thanks, they are standard then. Thanks a lot 😊
Many thanks i found very useful
Wow. Thanks for the video. This will make my job easier!!!!!
So what you are saying is- it depends on your admin. tubing? macro or micro gtts sets right? Idk about blood admin tho.
Really thankful 🤗🙂🙂🙂
very simple. Thank you for sharing.
Thanks very helpful
Really you are 🙏
Drop factor : 15 usually for blood
But 20 for what can you tell me please
Very easy thank u
Y u took 4..can u explain it..I didnt get u
can you please try to help me with this problem:
An IV is set to deliver 30 drops/min. What is the infusion rate in ml/hr if there are 15 drops/ml?
infusion rate in ml/hr= 30drops/1(mint)×60/15= 120ml/hr.
why did you divide by 4 when drop rate is 15
at the start she worked out factor 15 is 1/4 and factor 20 is 1/3
but isnt it supposed to be 1/3 for 15 and 1/4 for 20
She divide 60 by 15 that is 4. And 60 divide 20 is 3.
Eliteshift95
Superb