@@Decyantic It should be fine, monitor your temps (hardware monitor) if you don't trust it. Some people act like 0rpm mode is this awful thing as if the manufacturers didn't purposely program it into the product. It's intended for when your pc is idle or some browsing and even *LIGHT* gaming. The gpu knows when it needs to turn the fans on. Hell right now I have 6 youtube tabs, newegg, a google sheet, and some other miscellaneous google searches open with discord in the background and my little gtx 970 is chilling at 0rpm at 44 degrees C with a 58 hot spot.
yep agree one of the best cases on a pc in my opinion and will be using it for my first pc build should be sick when I eventually get one for a birthday gift🔥🔥🔥
Hyte is great. I prefer my jonsbo pinecone because it comes with an 8" lcd screen that is installed into the front panel. There are so many great cases now adays. I've actually been looking at old relics, too. The raidmax smilodon is actually retro af. It looks and feels like a dinosaur, but actually has side panel fans and front and back fans as well, so decent ventilation for a case from 2006. It comes with a psu built in, but is only 500w, so it should probably be replaced asap.
@@Nelibelly21 H9 elite is literally just a basic ass rectangle case with some additional airflow, vents and dual chamber ☠️ this looks ten times better
Guys dont get a r7 5800x3d if you are building a new pc please Go with am5 so you could upgrade from a r5 7600 or anything If you have am4 already its fine to upgrade to r7 5800x3d
actually this case is kinda dumb due to the fact that the gpu fans will be almost sticked to the glass, which will result in high gpu temps... but yeah, it's gorgeous
@@strongpassword4827 nope. First - they have have differ blade and i don't see any of them in this build. Second - air flow from reverse fans lower them from they standard variant, and dramatic lower pressure. So if use reverse fans on water coller they drop air flow down to 0.4-0.5 from standard.
@@glowingplace7129 yes, you almost right. Hyte Y60 have 2 fans on bottom. Well, we have 2 inlet 120x120 1200rpm fans on bottom and 6 exhaust fans on this great build. Better than i think at start, but...
My question is: Is there a reason why i should buy the AL V2 over the SL-INF if they cost the same ? The specs look like the AL is a bit better in performance/noise but how much is that in numbers ? If its like 10%+ better i would probably go with the AL but if its just minor differences in performance/noise then id rather get the SL-INF?
I have a question. Isn't it bad for the gpu if the exhaust or intake Fans are directly pushing or pulling air against the glass. Please corect me if i'm wong
tight cases look nice but they will be e-waste when the quad-fan gpus come out in 2025. the only saving grace is the vertical installation which will at least stop them from flopping.
Making my first PC on my own soon these are the parts I have picked out MB: MSI MPG B550 GAMING PLUS CPU: AMD Ryzen 5 5600X 6-core GPU: MSI Mech Radeon RX 6600 XT SSD: TEAMGROUP MP33 PRO 2TB RAM: 2 x 8GB CORSAIR - VENGEANCE LPX 3600MHz DDR4 C18 PSU: Seasonic PRIME TX-650 Total is just under 1000$ Still need a cpu cooler, pc case, and a monitor
But not enough fans this the only thing bad if this case than lian li evo if want watercooling custom you use the lian li evo and for normal watercooling tou go with hyte y60
Make it your reality, get a job as soon as possible, or start a side business and make it your main source of income (or both) Invest the money gained into your passion of building computers (equipment,parts,) Spend some time learning basic editing If you really wanted to do this for a living you have to earn it Best of luck
Cases are getting too big with too much fragile glass, in my opinion. Seems more of an inconvenience. After I do a build, I look at my screen more than the PC anyways. I'll skimp on the looks of it means I can get better parts for performance.
I got nzxt x53 in my build, but the darn pump sound, which is kinda low frequency but my ears pick it up as soon as the pump is above 45% speed. I can also hear the pump sound from the liquid freezer, so for my next build i have to go woth full air cooling.
I get this comment is old now, but what? He listed them all in the video, both audio and putting them on screen. Were you waiting for him to bring them to your house??
Sick build dude! Love to see it
@overkill computers
Overkill computers r the goats
collab now
Colab BRO!
Collab!
I just remembered most GPU's fans don't function until at a certain temperature
@king yeah
I set mine to always work🫡
@@exdia9709 don't do that, you will just lower ur fans lifespan, gpus are meant to handle below 60c idle temperatures
@@GamerorPlayer101Really? I always turned mine on with 30-40% power to keep things below 65° 😅
@@Decyantic It should be fine, monitor your temps (hardware monitor) if you don't trust it. Some people act like 0rpm mode is this awful thing as if the manufacturers didn't purposely program it into the product. It's intended for when your pc is idle or some browsing and even *LIGHT* gaming. The gpu knows when it needs to turn the fans on. Hell right now I have 6 youtube tabs, newegg, a google sheet, and some other miscellaneous google searches open with discord in the background and my little gtx 970 is chilling at 0rpm at 44 degrees C with a 58 hot spot.
This pc has more fans than my house
*More fans than my Braincells
More fans than mrbeast
That pc has more fans than Jake paul
Y60 and O11 are both amazing cases in terms of looks imo
Rather use that money to buy a gpu instead 😂
@@JahonCross with yo broke ass go for it bro😂
i personally prefer the look of an o11d evo and it's considerably cheaper than a Y60 where I live
@@JahonCross A hyte Y70 + and a proper GPU is like the way to go. Not just a GPU.
Love the content boys! Can’t wait to see the video of my build 👀 might upgrade to this case later on it looks sick
"yes mum i need this for studying and education games"
yep agree one of the best cases on a pc in my opinion and will be using it for my first pc build should be sick when I eventually get one for a birthday gift🔥🔥🔥
i love this case and think that adding a screen ruins it
Just made a build with the hyte y60, amazing looking case and pretty easy to work with.
Love the build! ❤
Looks so clean 😍
Love the content! Thanks for getting my nzxt out and making a vid!
Clean in all white 👌
I mean I don’t really like the look of the vertical gpu’s because I’m an aesthetic guy but with this build I think you really did a great job 👏
Hyte is great. I prefer my jonsbo pinecone because it comes with an 8" lcd screen that is installed into the front panel. There are so many great cases now adays. I've actually been looking at old relics, too. The raidmax smilodon is actually retro af. It looks and feels like a dinosaur, but actually has side panel fans and front and back fans as well, so decent ventilation for a case from 2006. It comes with a psu built in, but is only 500w, so it should probably be replaced asap.
Love the vid I have been watching your guises channel sense the your
second to RUclips shorts video Love the video keep up the hard work.
“H9 elite intensely laughing in the corner”
This looks far better than h9 elite
@@utasnimulhoq6519nah bro u trippin if u think this looks better than h9, this is sick but the h9 elite is on another level
@@Nelibelly21 H9 elite is literally just a basic ass rectangle case with some additional airflow, vents and dual chamber ☠️ this looks ten times better
That Looks sooooo good
I love the case Y60 , but I would like more if the case was more taller ❤
Guys dont get a r7 5800x3d if you are building a new pc please
Go with am5 so you could upgrade from a r5 7600 or anything
If you have am4 already its fine to upgrade to r7 5800x3d
I buy cases that actually provide good airflow! These all glass suffocation’s are made specifically for water cooled PCs!
The O11 has great airflow. Numerous placed for fans and airflow planning
Warning: Placing four sticks of DDR5 in and amd system with XMP enabled will cause stability issues and potential crashes
Looks really good except for the RGB
ALL OF THE FANS ARE SET TO EXHAUST, hahahaha
Embarrassing for them
There are fans hidden on the bottom
@@usagiii9337yeah because two intake fans at the bottom will counter the six exhaust fans.
Genius lmfao
it's the lian li reverse blade fans
Vertically mounted GPU’s never have the fans spinning 💀😭
cuz they arent hot enough to need them while idiling...
I love my Y60... it's one of my favorites so far!
actually this case is kinda dumb due to the fact that the gpu fans will be almost sticked to the glass, which will result in high gpu temps... but yeah, it's gorgeous
I love the look of this case, my favorite is the red one
I love the y70 touch
i do. i love it. i got a limited edition vtuber one and its the best case ive ever bought
So you have 6 exhaust coolers and no one intake? Greatest PC GAMING BUILD EVER.
reverse blade fans:
@@strongpassword4827 nope.
First - they have have differ blade and i don't see any of them in this build.
Second - air flow from reverse fans lower them from they standard variant, and dramatic lower pressure. So if use reverse fans on water coller they drop air flow down to 0.4-0.5 from standard.
@@SJDunker You are right, all fans are normal exhaust fans, no reverse. I have Infinity reverse fans and the blade looks different from normal ones.
in the hyte y 60 and 70 there are 3 fans on the bottom
@@glowingplace7129 yes, you almost right. Hyte Y60 have 2 fans on bottom.
Well, we have 2 inlet 120x120 1200rpm fans on bottom and 6 exhaust fans on this great build. Better than i think at start, but...
My question is: Is there a reason why i should buy the AL V2 over the SL-INF if they cost the same ? The specs look like the AL is a bit better in performance/noise but how much is that in numbers ? If its like 10%+ better i would probably go with the AL but if its just minor differences in performance/noise then id rather get the SL-INF?
Best case in my opinion currently using it rn
Do you get good temperatures with it?because I am looking into it
@@bestclips1218ye u get pretty good temperatures sorry for the extremely late reply
this looks sick
I have a question. Isn't it bad for the gpu if the exhaust or intake Fans are directly pushing or pulling air against the glass. Please corect me if i'm wong
For me my favorite is probably the Nzxt h9
same
I have a question what type of mother board is that cause I am wondering cause I want to build my own pc
Walawehhh....Cun teruk👍👍👍
tight cases look nice but they will be e-waste when the quad-fan gpus come out in 2025. the only saving grace is the vertical installation which will at least stop them from flopping.
Making my first PC on my own soon these are the parts I have picked out
MB: MSI MPG B550 GAMING PLUS
CPU: AMD Ryzen 5 5600X 6-core
GPU: MSI Mech Radeon RX 6600 XT
SSD: TEAMGROUP MP33 PRO 2TB
RAM: 2 x 8GB CORSAIR - VENGEANCE LPX 3600MHz DDR4 C18
PSU: Seasonic PRIME TX-650
Total is just under 1000$
Still need a cpu cooler, pc case, and a monitor
It looks so good!
hi Donald trump
in this build maybe the nzxt n7 mainboard would be a better choice
But not enough fans this the only thing bad if this case than lian li evo if want watercooling custom you use the lian li evo and for normal watercooling tou go with hyte y60
should have put the fans on the radiator as intake so its pulling in cooler air from the outside resulting in cooler cpu temps
but hotter gpu temps. pick your poison with pc building. idealy you want the rad at the top with fans set to exhaust.
would love it if it had a 5.25 inch bay somewhere
I like the y70 (y60 is to small for my needs)
It's awesome but can you make a black and red one
I like the clean face and the white hardwares
I really Like the Case butt it is super annoying that you can the GPU Just vertically mount
yeah its cool but i think the thermaltake core p90 is underrated
I wish I was this guy building pcs for a living 😢
Make it your reality, get a job as soon as possible, or start a side business and make it your main source of income (or both)
Invest the money gained into your passion of building computers (equipment,parts,)
Spend some time learning basic editing
If you really wanted to do this for a living you have to earn it
Best of luck
Using those parts at this day and agr is a war crime
Ooo this is neat I'm gonna build this but with a different cpu cooler I already have unfortunately. 4070 card tho
This is just like Luke davidsons pc did you get inspiration from his
Cases are getting too big with too much fragile glass, in my opinion. Seems more of an inconvenience. After I do a build, I look at my screen more than the PC anyways. I'll skimp on the looks of it means I can get better parts for performance.
It's just wider I think, maybe 5cm more than regular mid towers
I think nowdays many people consider interior significantly.
Are all the fans exhaust? How does air get in?
the radiator should be flipped. Tubes bottom position. or just top mount it for the best cpu cooling/water circulation for aio
I got nzxt x53 in my build, but the darn pump sound, which is kinda low frequency but my ears pick it up as soon as the pump is above 45% speed. I can also hear the pump sound from the liquid freezer, so for my next build i have to go woth full air cooling.
O11 dynamic evo is still better, there's more options for cooling.
I just got one and it’s amazing
Damn crazy build can I get a 3060 to improve my build
😊
I like the Nzxt h9 elite more
This is half the price tho
@@Crimson._- true
Make the most powerful and expensive pc
Plzzzz
Great build but I hate the 011 and the Hyte Y60 purely because the are Common as sand. be an individual imho
MAN, I WANTED THIS!!!!!!
Do a build with the new Hyte Y40 !
But the lian li o11 dynamic is a popular case too
overrated
I have that case but in red
That’s one of the best looking case
Looks nice but I dont care for that airflow.
All the parts you used please? I’m trying to make one of these
I get this comment is old now, but what? He listed them all in the video, both audio and putting them on screen. Were you waiting for him to bring them to your house??
Make a H9 build
Always wanted a pc but could never afford one but looks sick
Why not make it horizontal?
can you provide the full build ? as far as what motherboard and graphic card is in this pc
He did say what Graphics card but yes what mobo?
Mobo “looks” like a Rog Zephyrus 2
It telling the temperature is insane
is the top fans exhaust or intake?
Dude do a ultra budget build
Are all those fans in an exhaust config?
H6 Flow RGB in my opinion is better
I got the y70 and love it
Looks great 10/10 can't afford 🤣🤣🤣
All exhaust?
they will be the fans u can switch blades to see that nice side of the fan
No way man laid of the 4090s
Where can you get those fans in a reverse blade model?
Specs plz ???
How much is that build??
How is the cooling
All of the fans as exhaust?
Why didn't you put the glass on? Also deff liking the case!
I regret not going with this case
Can you comment the specs for me to looks at properly plz
Lovely !!!
Do the parts come with the pc????
Nope. Y70 with the touch infinite is so Based ❤
I still prefer h9 elite or flow
This case was aweful to work with. Read the Amazon 3 star reviews. Returning mine soon
12.0 bordeaux mixture
Total cost?
wish i had something like that